12-21-T3D-AQ2S2M-2C EVERLIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 12

Technical content

Features

․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 12-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Material Emitted Color Lens Color 12-21/T3D-AQ2S2M/2C InGaN Pure White Yellow Diffused

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan Package Outline Dimensions 3.1 0.7 0.9 0.9 0.65 Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V R 5 V Forward Current I F 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 90 ----- 285 mcd Viewing Angle 2θ1/2 ----- 130 ----- deg Forward Voltage VF 2.75 ----- 3.95 V IF=20mA Reverse Current I R ----- ----- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan B i n R a n g e O f L u m i n o u s I n t e n s i t y & F o r w a r d V o l t a g e Symbol Bin Code Min. Max. Unit Condition Q2 90.0 112 R1 112 140 R2 140 180 S1 180 225 IV S2 225 285 mcd I F=20mA 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 VF 8 3.65 3.95 V I F=20mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan Chromaticity Coordinates Specifications for Bin Grading Groups Bin Code CIE_x CIE_y Condition 0.274 0.226 0.274 0.258 0.294 0.286 1 0.294 0.254 0.274 0.258 0.274 0.291 0.294 0.319 2 0.294 0.286 0.294 0.254 0.294 0.286 0.314 0.315 3 0.314 0.282 0.294 0.286 0.294 0.319 0.314 0.347 4 0.314 0.315 0.314 0.282 0.314 0.315 0.334 0.343 5 0.334 0.311 0.314 0.315 0.314 0.347 0.334 0.376 A 0.334 0.343 IF=20mA Notes: 2.The products are sensitive to static electricity and care must be fully taken when handling products.

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan CIE Chromaticity Diagram

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD. 12-21/T3D-AQ2S2M/2C Device No. : SZDSE-121-T03 Prepared date:20-Sep-2006 Prepared by: Zhifang Pan 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com