11D YUANDEAN
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES ： 4PIN SIP & 8PIN DIL Package High Efficiency up to 85%. Unregulated Output Types Single Output 3.3/5/9/12/15V Approved By UL60950-1 Internal SMD Construction No External Component Required Operating Temperature:-40℃ TO +85℃ Industry Standard Pinout DC-DC Converter 11D SERIES 0.25Watt 1KV Isolated Single & Dual Output SIP4 & DIL8 Specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified Part Number Output Voltage Output Current Efficiency Package Style Vdc mA %TYP “X” ★11D-XXS03NNL 3.3 76 65 1 ★11D-XXS05NNL 5 50 65 1 ★11D-XXS09NNL 9 28 67 1 ★11D-XXS12NNL 12 21 70 1 ★11D-XXS15NNL 15 16 70 1 ★11D-XXS24NNL 24 10 70 1 11D-XXS03NXNL 3.3 76 65 2/3/4/5 11D-XXS05NXNL 5 50 65 2/3/4/5 11D-XXS09NXNL 9 28 70 2/3/4/5 11D-XXS12NXNL 12 21 70 2/3/4/5 11D-XXS15NXNL 15 16 70 2/3/4 11D-XXS24NXNL 24 10 70 2/3/4 11D-XXD03NXNL ±3.3 ±38 65 2/3 11D-XXD05NXNL ±5 ±25 65 2/3 11D-XXD09NXNL ±9 ±14 70 2/3 11D-XXD12NXNL ±12 ±10 70 2/3 11D-XXD15NXNL ±15 ±8 70 2/3 11D-XXD24NXNL ±24 ±5 70 2/3 YUAN DEAN SCIENTIFIC YUAN DEAN SCIENTIFIC CO.,LTD Rev:1 2018/10/01 11D SERIES Temperature Derating Graph Note ： 1.”XX” Is Input Voltage:03=3.3Vdc,05=5Vdc,09=9Vdc, 12=12Vdc, 15=15Vdc,24=24Vdc 2.Over 15V.24V input voltage using the 1/2/3/4 Package. 3.The input voltage increases, there will be an increase in efficiency. 4. ” ★” marked as recognized by UL 60950-1. Input Specifications Parameters Conditions Min Typ Max Units Voltage Tolerance Vo,Io Nom ±5 % Filter Capacitor 100 OutPut Power(%) -40 85 100 Ambient Temperature( ℃) Nature Convection
Parameters Conditions Min Typ Max Units Isolation Resistance 500Vdc 1000 MΩ Switching Frequency Full load, nominal input 100 KHz Operating Temperature -40 +85 ℃ Humidity Non Condensing 95 % Cooling Free air Convection Case material DAP MTBF MIL-HDBK-217F @25℃ 3500000 Hours Dimensions Package 1 11.50x6.00x10.00 mm Dimensions Package 2 12.70x10.16x6.80 mm Dimensions Package 3 12.70x10.16x7.50 mm Dimensions Package 4 11.50x7.50x10.00 mm Dimensions Package 5 11.50x6.0x7.50 mm Recommended Test Circuit 11D SERIES 11D - 05 S 05 N 2 NL A B C D E F G A:Series B:Input Voltage C:Single(S)Dual(D) D:Output Voltage E:Unregulated(N) F:Packge G:RoHS Version Part Number YUAN DEAN SCIENTIFIC CO.,LTD Rev:1 2018/10/01 Output Current(%) Output Voltage(%) 120% 110% 100% 90% 80% 70% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 120% Single Vin +Vout GND -Vout Cin Cout 3.3V:Cin 4.7uF,25V 5V :Cin 4.7uF,25V 9V:Cin 4.7uF,25V 12V:Cin 2.2uF,25V 15V:Cin 1uF,50V 24V:Cin 1uF,50V 3.3V :Cout 22uF,16V 5V :Cout 10uF,25V 9V :Cout 4.7uF,25V 12V:Cout 2.2uF,25V 15V:Cout 1uF,50V 24V:Cout 1uF,50V Tolerance Envelope Graph Markings and Dimensions PIN Connection PIN 1 2 3 4 5 6 7 8 Single(4Pin) -Vin +Vin -Vout +Vout Single(8Pin) -Vin No Pin No Pin +Vin +Vout No Pin -Vout NC Dual(8Pin) -Vin No Pin No Pin +Vin +Vout No Pin Com -Vout Out put Specifications Parameters Conditions Min Typ Max Units Voltage Tolerance 100% full load ±5 % Short Circuit Protection Short Term 1 Sec Line Regulation For 1.0% OF Vin 1.2 % Load Regulation 3.3V,5V Load Regulation 9V,12V,15V,24V Ripple & Noise BW=DC To 20MHz 100 mVp-p Transient response setting time 50% load step change 350 us Dual Vin +Vout GND Cin Cout -Vout Cout Com 3.3V:Cin 4.7uF,25V 5V :Cin 4.7uF,25V 9V:Cin 4.7uF,25V 12V:Cin 2.2uF,25V 15V:Cin 1uF,50V 24V:Cin 1uF,50V 3.3V :Cout 22uF,16V 5V :Cout 10uF,25V 9V :Cout 4.7uF,25V 12V:Cout 2.2uF,25V 15V:Cout 1uF,50V 24V:Cout 1uF,50V 11.50 6.00 10.00 4.00 7.62 TOP VIEW BOTTOM VIEW 1 2 3 4 printed face 0.50±0.05 2.54 1.25 0.25±0.05 1.94 TOP VIEW BOTTOM VIEW 1 4 12.70 10.16 6.80 4.00 7.62 7.62 O0.50±0.05 5.08 0.50±0.05 TOP VIEW BOTTOM VIEW 1 4 12.70 10.16 7.50 4.00 7.62 7.62 O0.50±0.05 5.08 0.50±0.05 11.50 10.00 4.00 7.62 TOP VIEW BOTTOM VIEW 1 2 3 4 printed face 0.50±0.05 2.54 1.25 0.25±0.05 1.94 7.50 11.50 7.50 4.00 7.62 TOP VIEW BOTTOM VIEW 1 2 3 4 printed face 0.50±0.05 2.54 1.25 0.25±0.05 1.94 6.00 1 2 3 4 Unit :mm Unless otherwise specified, all tolerances are ±0.25