1136510 LAPP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 2
Technical content
1136510 DATA SHEET
Valid from: 23.05.2018 ÖLFLEX® CLASSIC 115 CY BK Creator: LABU/PDC Released: HAPF/PDC Document: DB1136510EN Version: 01 Page 1 of 2 We reserve all rights according to DIN ISO 16016. PD 0019/05_04.18EN Application ÖLFLEX CLASSIC 115 CY BK cables are control cables for occasional flexible use and fixed installation under normal mechanical load conditions. They are also suitable for use in dry, damp or wet areas. They are suitable for outdoor use if the indicated temperature range is observed. They are largely resistant to acids, alkalis and certain oils at room temperature. CY BK cables are suitable for occasional, non-automated movements. They meet the requirements for slow rotational movements, such as in the loop of a wind turbine. The maximum tensile load is 15 N/mm2 of conductor cross-section during installation and operation. Compulsory guidance is not permitted. The screening braid protects against interference from electrical fields. Application range: Control units for machine tools, conveyor systems, measurement and control technology, office machines and systems for data processing. This cable is suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they typically occur in the loop of a wind turbine. Design Design based on EN 50525-2-51/ VDE 0285-525-2-51 Conductor bare copper, fine wire strand in acc. to IEC 60228 resp. VDE 0295, class 5 Core insulation PVC compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3 with increased requirements acc. to Lapp specification Core identification according to VDE 0293-1, with or without GN/YE ground conductor, black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334 Wrapping plastic foil Screen Braid of tinned copper, coverage = 85% (nominal value) Outer sheath PVC compound TM2 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1, with increased requirements acc. to Lapp specifications Colour: black, similar RAL 9005 Electrical properties Specific insulation resistance (20°C) > 20 G Ω x cm Nominal voltage U0 / U: 300 / 500 V Test voltage core / core: 4000 V core / screen: 2000 V Mechanical and thermal properties Min. bending radius occasional flexing: 20 x cable Ø fixed installation: 6 x cable Ø Temperature range occasional flexing: -5 °C up to +70 °C max. conductor temp. fixed installation: -40 °C up to +80 °C max. conductor temp. Torsion movement in WTG TW-0 (5000 cycles at ≥ +5°C) TW-1 (2000 cycles at ≥ -20°C) ± 150 °/m at 1 revolution per minute Flammability acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2 UV resistance acc. to EN 50525-1 (VDE 0285-525-1) cable with black sheath are suitable for permanent outdoor use.
Valid from: 23.05.2018 ÖLFLEX® CLASSIC 115 CY BK Creator: LABU/PDC Released: HAPF/PDC Document: DB1136510EN Version: 01 Page 2 of 2 We reserve all rights according to DIN ISO 16016. PD 0019/05_04.18EN UV resistant acc. to EN 50618 resp. VDE 0283-618 acc. to EN 50620 resp. VDE 0285-620 acc. to EN ISO 4892-2-2013, method A (change of colour allowed) Transfer impedance at 30 MHz max. 250 Ω/km Tests acc. to IEC 60811, EN 50395, EN 50396 EU directive These cables are conform to the EU-Directives 2014/35/EU (Low Voltage Directive)