0036425 LAPP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 3
Technical content
U.I. Lapp GmbH DATA SHEET ÖLFLEX® SERVO 2YSLCY-JB DB 0036425 valid from: 21.10.2015 Originator: CHIL / PDC approved: HAPF / PDC Document: DB0036425EN page 1 of 3 All rights reserved acc. to DIN ISO 16016. PD 0019/2.2_11.10EN Application ÖLFLEX® SERVO 2YSLCY-JB, ÖLFLEX® SERVO 2YSLCYK-JB and ÖLFLEX® SERVO 2YSLC-JB BK are double shielded low capac- itance cables of flexible design, with PVC sheath and PE core insulation. They are suitable for frequency converters operated by three-phase current motors. The cables are designed for use in dry, humid or wet conditions. They are suitable for free, non-continuously recurring movements without tensile load or compulsory guidance and also for fixed installation. At room temperature they are widely resistant to acids, alkali-resistant and resistant to certain oils. Having a con centric conductor array design, the cable possesses a split gro und wire with reduced total cross section. This concentric design avoids a ll cable-relevant parts from high frequency discharge currents, which may damage motor bearings especially at high frequencies and long cable lengths. This design also improves EMC noise situation of the whole drive system. Additionally, due to the design the frequency converter system is burdened with lower capacitive reactive power compared to PVC insulated cables. Version Type “a” (2YSLCY-JB): with transparent PVC-outer sheath for indoor use Version Type “b” (2YSLCYK-JB): with black UV resistance PVC-outer sheath, flexible at low temperatures, for outdoor use Version Type “c” (2YSLCY-JB BK): with black UV resistance PVC-outer sheath for outdoor use Application range: Connection cable between frequency converter and motor, paper industry, chemical industry, heavy industry Design Design based on DIN VDE 0276-603 / HD 603 S1 + A3 DIN 57250-1 resp. VDE 0250-1 Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5 Core insulation PE compound acc. to DIN EN 50290-2-23 resp. VDE 0819-103, table 1, column L/MD Core identification coloured in acc. to DIN VDE 0293-308 resp. HD 308 S2 Stranding Type “a”, 2YSLCY-JB: 4 conductors twisted together in one layer Type “b”, 2YSLCYK-JB: 3+3 cores twisted concentrically, protective conductor divided into three positioned in the gusset Type “c”, 2YSLCY-JB BK: 4 conductors twisted together in one layer Screening double screening with aluminium-coated plastic foil (metal-side outwards) and braid of tinned copper wires, braid coverage min. 70% (nominal value) Outer sheath Type “a”, 2YSLCY: PVC sheath TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1 colour: transparent Type “b”, 2YSLCYK: PVC sheath, acc. to EN 50363-4-1 resp. VDE 0207-363-4-1, UV resistant, cold flexible, outdoor and direct burial use colour: black, similar RAL 9005 Type “c”, 2YSLCY-BK: PVC sheath TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1 UV resistant, outdoor and direct burial use, colour: black, similar RAL 9005
U.I. Lapp GmbH DATA SHEET ÖLFLEX® SERVO 2YSLCY-JB DB 0036425 valid from: 21.10.2015 Originator: CHIL / PDC approved: HAPF / PDC Document: DB0036425EN page 2 of 3 All rights reserved acc. to DIN ISO 16016. PD 0019/2.2_11.10EN Electrical properties Nominal voltage U0/U 600 / 1000 V Test voltage Core/Core, Core/Screen 4000 V AC Specific insulation resistance > 20 G Ω x cm Surface transfer impedance at 30 MHz ≤ 250 Ω / km Mechanical and thermal properties Min. bending radius occasional flexing: 15 x outer diameter fixed installation: 4 x outer diameter Temperature range Type “a”, 2YSLCY: occasional flexing -5 °C up to +70 °C max. conductor temperature fixed installation -40 °C up to +70 °C max. conductor temperature Type “b”, 2YSLCYK: gelegentlich bewegt -15 °C bis +70 °C max. conductor temperature fest verlegt -40 °C bis +70 °C max. conductor temperature Type “c”, 2YSLCY-JB BK: occasional flexing: -5 °C up to +70 °C max. conductor temperature fixed installation -40 °C up to +70 °C max. conductor temperature Flammability flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2 UV-resistance Type „b“ and „c“ EN 50525-1 resp. VDE 0285-525-1, cables with black sheath are suitable for a permanent outdoor use, acc. to EN 4892-2-2006, method A (change of colour allowed) Tests acc. to IEC 60811 resp. VDE 0473, VDE 0472, EN 50395, EN50396 EU-Directives This cable is conform to the EU-Directives 2014/35/EU (Low Voltage Directive) and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).
U.I. Lapp GmbH DATA SHEET ÖLFLEX® SERVO 2YSLCY-JB DB 0036425 valid from: 21.10.2015 Originator: CHIL / PDC approved: HAPF / PDC Document: DB0036425EN page 3 of 3 All rights reserved acc. to DIN ISO 16016. PD 0019/2.2_11.10EN