1136303 LAPP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 1
Technical content
U.I. Lapp GmbH DATA SHEET ÖLFLEX 115 CY DB1136752 valid from: 19.08.2014 Originator: ROKR / PDC approved: HAPF / PDC Document: DB1136752DE page 1 of 1 All rights reserved acc. to DIN ISO 16016. PD 0019/2.2_11.10EN Application ÖLFLEX 115 CY cables are control cables for occasional flexible use and fixed installation under normal mechanical load conditions. They are among others designed for use in dry, damp or wet rooms. Outdoor use: They may only be installed with UV protection and considering the temperature range. At room temperature they are widely resistant to acids, caustic solu- tions and certain oils. They are suitable for free, non-continuously recurring movement without tensile load. Continuous operational movements, restricted guidance, usage of these cables in moving cable carriers or on motor drum guidance or under a strain of more t han 15 N/mm² conductor cross-section are not allowed. The screen is a protection against electrical interference. Application range: Control units for machine tools, conveyor systems, measurement and control technology, systems for data processing. Design Design Based on EN 50525-2-51 ressp. VDE 0285-525-2-51 Conductor Fine wire strands of bare copper acc. to IEC 60228 resp. VDE 0295, Class 5 Core insulation PVC compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3 with increased requirements acc. to Lapp specification Core identification code according to VDE 0293-1, with or without GN/YE ground conductor, black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334 Wrapping Plastic foil Screen Braid of tinned copper, coverage = 85% (nominal value) Outer sheath PVC compound TM2 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1 Colour: Siver grey, similar RAL 7001 Electrical properties at 20°C Nominal voltage 300 / 500 V Test voltage Core/core 4000 V AC Core/screen 2000 V AC Transfer impedance max. 250 mΩ/m at 30 MHz Mechanical and thermal properties Minimum bending radius Occasional flexing: 20 x outer diameter Fixed installation: 6 x outer diameter Temperature range Occasional flexing: - 5˚C up to +70˚C max. conductor temp. Fixed installation: - 40˚C up to +80˚C max. conductor temp. Flammability acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2 Tests acc. to IEC 60811, EN 50395, EN 50396 EC-Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive) and 2011/65/EG (RoHS, Restriction of the use of certain hazardous substances).