1125752 LAPP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 1
Technical content
1125752 DATA SHEET
valid from: 08.03.2023 ÖLFLEX CLASSIC 110 SY Creator: MAIH / PDC Released: ALTE / PDC Document: DB1125752EN Version: 07 Page 1 of 1 We reserve all rights according to DIN ISO 16016. PD 0019/05_04.18EN Application ÖLFLEX CLASSIC 110 SY cables are VDE approved power and control cables for occasional flexible use and fixed installation for medium mechanical load conditions. They are also suitable for use in dry, damp or wet areas. Outdoor use: If using outdoors, observe the indicated temperature range and use with UV protection. They are largely resistant to acids, alkalis and certain oils at room temperature. They are suitable for occasional, non-automated movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted. The steel wire braid is used for the mechanical protection of the cable. Application range: As power and connecting cable in plant engineering and construction, industrial machinery and in heating and air-conditioning systems as well as in areas with high mechanical stress. Design Design based on EN 50525-2-51 Certification ⊲ VDE-REG 7030 ⊳ Conductor fine wire strands of bare copper, acc. to IEC 60228, class 5 Insulation PVC compound TI2 acc. to DIN EN 50363-3 with increased requirements acc. to Lapp specification Core identification code acc. to VDE 0293-1, with or without GN/YE ground conductor black cores with white numbers acc. to DIN EN 50334 Stranding cores are stranded in layers Inner sheath PVC compound TM2 acc. to EN 50363-4-1 colour: silver grey, similar RAL 7001 Braid Galvanized steel-wires, coverage = 70 % (nominal value) Outer sheath PVC compound TM2 acc. to EN 50363-4-1 colour: transparent dlsafjlöjf Electrical properties at 20 °C Nominal voltage U₀ / U: 300 / 500 V Test voltage core / core: 4000 V AC core / screen: 4000 V AC Mechanical and thermal properties Minimum bending radius occasional flexing: 20 x cable diameter fixed installation: 6 x cable diameter Temperature range occasional flexing: - 5˚C up to +70˚C max. conductor temp. fixed installation: - 40˚C up to +80˚C max. conductor temp. Flammability acc. to IEC 60332-1-2 Tests acc. to IEC 60811, EN 50395, EN 50396 General requirements These cables are conform to the EU-Directive 2014/35/EU (Low Voltage Directive) Environmental information These cables meet the substance-specific requirements of the EU Directive 2011/65/EU (RoHS).