1121200 LAPP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 1
Technical content
1121200 DATA SHEET
valid from: 01.01.2019 Creator: HESC / PDC Released: ALTE / PDC Document: DB1121200EN Version: 04 Page 1 of 1 We reserve all rights according to DIN ISO 16016. PD 0019/05_04.18EN Application ÖLFLEX CLASSIC 110 CY BLACK 0,6/1kV cables are power and control cables with a black outer sheath for occasional flexible use and fixed installation subject to medium mechanical load conditions. They are also suitable for use in dry, damp or wet areas. They are suitable for outdoor use if the indicated temperature range is observed. They are largely resistant to acids, alkalis and (certain) oils at room temperature. They are suitable for occasional, non-automated movements. The maximum tensile load is 15 N/mm² of conductor cross- section during installation and operation. Compulsory guidance is not permitted. The screening braid protects against interference from electrical fields. Application range: Plant engineering and construction, industrial machinery, heating air conditioning systems, power station, stage application. Design Design based on VDE 0250-1 and VDE 0276-627 bzw. HD 627 S1 Certification EN 13501-6 and EN 50575 Classification of fire behaviour (article/dimension range see www.lappkabel.com/cpr) Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5 Insulation PVC compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3 with increased requirements acc. to Lapp specification Core identification code acc. to VDE 0293-1, with or without GN/YE ground conductor black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334 Stranding cores are stranded in layers Inner sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1 colour: Black, similar RAL 9005 Screen braid of tinned copper, coverage 85% (nominal value) Outer sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1 colour: black, similar RAL 9005 dlsafjlöjf Electrical properties at 20°C Rated voltage U₀ / U: 600 / 1000 V Test voltage core / core: 4000 V AC core / screen: 4000 V AC Mechanical and thermal properties Minimum bending radius occasional flexing: 20 x outer diameter fixed installation: 6 x outer diameter Temperature range occasional flexing: -5˚C up to +70˚C max. conductor temp. fixed installation: -40˚C up to +80˚C max. conductor temp. Flammability flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2 UV resistance acc. to EN ISO 4892-2, Method A, DIN EN 50289-4-17/VDE 0819-289-4-17, Method A Ozone resistance acc. to EN 50396 Tests acc. to IEC 60811, EN 50395, EN 50396 General requirements These cables are conform to the EU-Directive 2014/35/EU (Low Voltage Directive). A part of these cables (see www.lappkabel.com/cpr) are classified in accordance with the EU-Regulation no. 305/2011 (CPR).