1119003 LAPP
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 7
Technical content
ÖLFLEX® CLASSIC 110 VDE-registered oil-resistant PVC control cable for a wide range of applications ÖLFLEX® CLASSIC 110 - PVC control cable, VDE registered, oil resistant and flexible for various applications, 300/500V, also for YSLY or YY Info CPR: Article number choice under www.lappkabel.com/cpr VDE certificate of conformity with factory surveillance Torsion-resistant Power chain Oil-resistant Good chemical resistance Benefits Wide choice of standardized lengths and individual cuts Very broad range, items with up to 100 conductors Application range For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load Dry or damp rooms that are subject to medium mechanical loads Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG) In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors Last Update (28.03.2019) 1 / 7 ©2019 Lapp Group - Technical changes reserved Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.16
ÖLFLEX® CLASSIC 110 Product features Flame-retardant according IEC 60332-1-2 Good chemical resistance, see catalogue appendix T1 Oil-resistant according to DIN EN 50290-2-22 (TM54) Norm references / Approvals VDE reg. no. 7030 for the following sizes: up to 2.5 mm²: 2 - 65 cores from 4 mm²: 2 - 7 cores from 25 mm²: 2 - 5 cores Product Make-up Fine-wire strand made of bare copper wires PVC insulation LAPP P8/1 Cores twisted in layers PVC outer sheath, grey (similar RAL 7001) Technical Data Classification ETIM 5: ETIM 5.0 Class-ID: EC000104 ETIM 5.0 Class-Description: Control cable Classification ETIM 6: ETIM 6.0 Class-ID: EC000104 ETIM 6.0 Class-Description: Control cable Core identification code: Black with white numbers acc. to VDE 0293-1 Conductor stranding: Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5 Torsion movement in WTG: TW-0 & TW-1, refer to Appendix T0 Minimum bending radius: Occasional flexing: 10 x outer diameter In power chains: 15 x outer diameter Fixed installation: 4 x outer diameter Nominal voltage: U0/U: 300/500 V Test voltage: 4000 V Protective conductor: G = with GN-YE protective conductor X = without protective conductor Temperature range: Occasional flexing: -15°C to +70°C In power chains: -5°C to +70°C Fixed installation: -40°C to +80°C Note Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges. Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils). Photographs and graphics are not to scale and do not represent detailed images of the respective products. Prices are net prices without VAT and surcharges. Sale to business customers only. Last Update (28.03.2019) 2 / 7 ©2019 Lapp Group - Technical changes reserved Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.16
ÖLFLEX® CLASSIC 110 Powered by TCPDF (www.tcpdf.org) Last Update (28.03.2019) 1 / 1 Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.16 Article number Number of cores and mm² per conductor Outer diameter [mm] Copper index (kg/km) Weight (kg/km) ÖLFLEX® CLASSIC 110 1119752 2 X 0.5 4.8 9.6 35 1119003 3 G 0.5 5.1 14.4 42 1119753 3 X 0.5 5.1 14.4 42 1119004 4 G 0.5 5.7 19.2 54 1119754 4 X 0.5 5.7 19.2 54 1119005 5 G 0.5 6.2 24 63 1119755 5 X 0.5 6.2 24 63 1119007 7 G 0.5 6.7 33.6 81 1119757 7 X 0.5 6.7 33.6 81 1119010 10 G 0.5 8.6 48 116 1119012 12 G 0.5 8.9 58 131 1119014 14 G 0.5 9.5 67 153 1119018 18 G 0.5 10.5 86.4 188 1119021 21 G 0.5 11.7 101 221 1119025 25 G 0.5 12.4 120 261 1119030 30 G 0.5 13.3 144 304 1119035 35 G 0.5 14.5 168 356 1119040 40 G 0.5 15.4 192 400 1119052 52 G 0.5 17.3 250 517 1119061 61 G 0.5 18.5 293 603 1119065 65 G 0.5 19.6 312 644 1119080 80 G 0.5 21.1 384 780 1119100 100 G 0.5 23.6 480 975 1119802 2 X 0.75 5.4 14.4 45 1119103 3 G 0.75 5.7 21.6 55 1119803 3 X 0.75 5.7 21.6 55 1119104 4 G 0.75 6.2 28.8 66 1119804 4 X 0.75 6.2 28.8 66 1119105 5 G 0.75 6.7 36 79 1119805 5 X 0.75 6.7 36 79 1119107 7 G 0.75 7.3 50 101 1119807 7 X 0.75 7.3 50 101 1119109 9 G 0.75 9.4 65 137 ©2019 Lapp Group - Technical changes reserved
Article number Number of cores and mm² per conductor Outer diameter [mm] Copper index (kg/km) Weight (kg/km) PRODUCT INFORMATION ÖLFLEX® CLASSIC 110 Powered by TCPDF (www.tcpdf.org) Last Update (28.03.2019) 1 / 1 Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.16 1119110 10 G 0.75 9.6 72 150 1119112 12 G 0.75 9.9 86 171 1119812 12 X 0.75 9.9 86 171 1119115 15 G 0.75 10.9 108 209 1119117 15 X 0.75 10.9 108 209 1119116 16 G 0.75 11.1 115.2 220 1119118 18 G 0.75 11.7 130 244 1119121 21 G 0.75 13 151 286 1119125 25 G 0.75 13.8 180 337 1119126 26 G 0.75 14.2 187.2 350 1119134 34 G 0.75 15.9 245 448 1119141 41 G 0.75 17.4 296 538 1119150 50 G 0.75 19.2 360 648 1119151 51 G 0.75 19.2 367 646 1119161 61 G 0.75 20.5 439 779 1119165 65 G 0.75 21.8 468 832 1119180 80 G 0.75 23.6 576 1019 1119200 100 G 0.75 26.4 718 1271 1119852 2 X 1.0 5.7 19.2 53 1119203 3 G 1.0 6 28.8 65 1119853 3 X 1.0 6 28.8 65 1119204 4 G 1.0 6.5 38.4 79 1119854 4 X 1.0 6.5 38.4 79 1119205 5 G 1.0 7.1 48 94 1119855 5 X 1.0 7.1 48 94 1119206 6 G 1.0 8 58 113 1119207 7 G 1.0 8 67 126 1119857 7 X 1.0 8 67 126 1119208 8 G 1.0 9.5 77 149 1119209 9 G 1.0 10 86 164 1119210 10 G 1.0 10.2 96 180 1119212 12 G 1.0 10.5 115 205 1119862 12 X 1.0 10.5 115 205 1119214 14 G 1.0 11.2 134 238 ©2019 Lapp Group - Technical changes reserved
Article number Number of cores and mm² per conductor Outer diameter [mm] Copper index (kg/km) Weight (kg/km) PRODUCT INFORMATION ÖLFLEX® CLASSIC 110 Powered by TCPDF (www.tcpdf.org) Last Update (28.03.2019) 1 / 1 Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.16 1119216 16 G 1.0 11.8 153.6 266 1119218 18 G 1.0 12.7 173 320 1119868 18 X 1.0 12.7 173 320 1119220 20 G 1.0 13.4 192 330 1119870 20 X 1.0 13.4 192 330 1119225 25 G 1.0 14.7 240 408 1119226 26 G 1.0 15.1 249 424 1119234 34 G 1.0 17.1 326 551 1119236 36 G 1.0 17.4 346 578 1119241 41 G 1.0 18.8 394 661 1119250 50 G 1.0 20.6 480 797 1119256 56 G 1.0 21.4 538 888 1119261 61 G 1.0 22.1 586 958 1119265 65 G 1.0 23.6 624 1033 1119280 80 G 1.0 25.3 768 1251 1119300 100 G 1.0 28.3 960 1560 1119902 2 X 1.5 6.3 29 68 1119303 3 G 1.5 6.7 43 84 1119903 3 X 1.5 6.7 43 84 1119304 4 G 1.5 7.2 58 104 1119904 4 X 1.5 7.2 58 104 1119305 5 G 1.5 8.1 72 128 1119905 5 X 1.5 8.1 72 128 1119306 6 G 1.5 8.4 86.4 157 1119307 7 G 1.5 8.9 101 166 1119907 7 X 1.5 8.9 101 166 1119308 8 G 1.5 10.6 115 210 1119313 8 X 1.5 10.6 116 210 1119309 9 G 1.5 11.4 130 221 1119310 10 G 1.5 11.6 143 243 1119311 11 G 1.5 11.6 158 258 1119312 12 G 1.5 12 173 279 1119912 12 X 1.5 12 173 279 1119314 14 G 1.5 12.7 202 323 ©2019 Lapp Group - Technical changes reserved
Article number Number of cores and mm² per conductor Outer diameter [mm] Copper index (kg/km) Weight (kg/km) PRODUCT INFORMATION ÖLFLEX® CLASSIC 110 Powered by TCPDF (www.tcpdf.org) Last Update (28.03.2019) 1 / 1 Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.16 1119316 16 G 1.5 13.4 230.4 361 1119318 18 G 1.5 14.4 259 407 1119321 21 G 1.5 15.7 302 469 1119325 25 G 1.5 16.9 360 560 1119326 26 G 1.5 17.3 374.4 582 1119332 32 G 1.5 18.7 461 704 1119334 34 G 1.5 19.4 490 746 1119341 41 G 1.5 21.3 591 895 1119350 50 G 1.5 23.5 720 1089 1119361 61 G 1.5 25.2 878 1309 1119365 65 G 1.5 26.7 936 1398 1119952 2 X 2.5 7.5 48 101 1119403 3 G 2.5 8.1 72 132 1119404 4 G 2.5 8.9 96 163 1119405 5 G 2.5 10 120 200 1119407 7 G 2.5 11.1 168 267 1119412 12 G 2.5 14.8 288 445 1119414 14 G 2.5 15.8 336 515 1119418 18 G 2.5 17.8 432 648 1119425 25 G 2.5 20.8 600 890 1119434 34 G 2.5 24.4 816 1208 1119450 50 G 2.5 29.4 1200 1754 1119503 3 G 4.0 9.9 115 201 1119504 4 G 4.0 10.8 154 249 1119505 5 G 4.0 12.1 192 294 1119507 7 G 4.0 13.4 269 407 1119511 11 G 4.0 17.6 422 634 1119512 12 G 4.0 18.1 461 660 1119603 3 G 6.0 11.7 172.8 289 1119604 4 G 6.0 13 230 365 1119605 5 G 6.0 14.5 288 447 1119607 7 G 6.0 16 403 600 1119613 3 G 10.0 14.6 288 466 1119614 4 G 10.0 16.2 384 590 ©2019 Lapp Group - Technical changes reserved
Article number Number of cores and mm² per conductor Outer diameter [mm] Copper index (kg/km) Weight (kg/km) PRODUCT INFORMATION ÖLFLEX® CLASSIC 110 Powered by TCPDF (www.tcpdf.org) Last Update (28.03.2019) 1 / 1 Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.16 1119615 5 G 10.0 18.1 480 722 1119617 7 G 10.0 20 672 968 1119624 4 G 16.0 18.8 614 1087 1119625 5 G 16.0 21.2 768 1370 1119627 7 G 16.0 23.4 1075 1779 1119634 4 G 25.0 23.5 960 1582 1119635 5 G 25.0 26.4 1200 1998 1119636 7 G 25.0 29.1 1680 2825 1119644 4 G 35.0 26.4 1344 2106 1119645 5 G 35.0 29.6 1680 2635 Powered by TCPDF (www.tcpdf.org) ©2019 Lapp Group - Technical changes reserved