110CNQ045APBF IRF

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 7

Technical content

110 Amp

Major Ratings and Characteristics IF(AV) Rectangular 110 A waveform VRRM 45 V IFSM @ tp = 5 µs sine 5400 A VF @ 55 Apk, TJ = 125 °C 0.5 V (per leg) TJ range - 55 to 150 °C Characteristics Values Units Description/ Features D61-8 110CNQ045APbF 110CNQ045ASMPbF D61-8-SM The center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable opera- tion up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 °C TJ operation Center tap module Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, small footprint, high current package New fully transfer-mold low profile, small footprint, high current package Through-hole versions are currently available for use in Lead-Free applications ("PbF" suffix) www.irf.com

110CNQ045APbF, 110CNQ045ASMPbF Bulletin PD-21000 01/05 www.irf.com Part number 110CNQ045A.. VR Max. DC Reverse Voltage (V) 45 VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings Absolute Maximum Ratings Parameters 110CNQ Units Conditions IF(AV) Max. Average Forward Per Leg 55 A 50% duty cycle @ T C = 125 °C, rectangular wave form Current * See Fig. 5 Per Device 110 IFSM Max. Peak One Cycle Non-Repetitive 5400 5µs Sine or 3µs Rect. pulse Surge Current (Per Leg) * See Fig. 7 800 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 54 mJ T J = 25 °C, IAS = 8 Amps, L = 1.7 mH (Per Leg) IAR Repetitive Avalanche Current 8 A Current decaying linearly to zero in 1 µsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical A VFM Max. Forward Voltage Drop 0.54 V @ 55A (Per Leg) * See Fig. 1 (1) 0.7 V @ 110A

0.5 V @ 55A

0.69 V @ 110A

IRM Max. Reverse Leakage Current 3 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 350 mA T J = 125 °C CT Max. Junction Capacitance(Per Leg) 3800 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 5.5 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR) Electrical Specifications TJ = 25 °C TJ = 125 °C VR = rated VR Parameters 110CNQ Units Conditions TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 0.5 °C/W DC operation * See Fig. 4 to Case (Per Leg) RthJC Max. Thermal Resistance Junction 0.25 °C/W DC operation to Case (Per Package) RthCS Typical Thermal Resistance, Case 0.30 °C/W Mounting surface , smooth and greased to Heatsink (D61-8 Only) Device flatness < 5 mils wt Approximate Weight 7.8 (0.28) g (oz.) T Mounting Torque Min. 40 (35) (D61-8 Only) Max. 58 (50) Thermal-Mechanical Specifications Kg-cm (Ibf-in) Parameters 110CNQ Units Conditions Following any rated load condition and with rated V RRM applied (1) Pulse Width < 300µs, Duty Cycle <2%

110CNQ045APbF, 110CNQ045ASMPbF Bulletin PD-21000 01/05 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Instantaneous Forward Current - I F (A) Forward Voltage Drop - VFM (V) Reverse Current - I R (mA) Reverse Voltage - VR (V) Reverse Voltage - VR (V) Junction Capacitance - C T (p F) Thermal Impedance - Z thJC (°C/W) t1 , Rectangular Pulse Duration (Seconds) 100 1000 0 0.5 1 1.5 2 T = 150˚C T = 125˚C T = 25˚C J J J 0.01 0.1 100 1000 0 5 10 15 20 25 30 35 40 45 125˚C 100˚C 75˚C 50˚C 25˚C Tj = 150˚C 1000 10000 0 5 10 15 20 25 30 35 40 45 Tj = 25˚C 0.001 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM Notes: 1. Duty factor D = t 1 / t 2 2. Peak Tj = Pdm x ZthJC + Tc

110CNQ045APbF, 110CNQ045ASMPbF Bulletin PD-21000 01/05 www.irf.com Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 8 - Unclamped Inductive Test Circuit Fig. 6 - Forward Power Loss Characteristics (Per Leg) (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR FREE-WHEEL DIODE 40HFL40S02CURRENT MONITOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+ Allowable Case Temperature (°C) Average Forward Current - IF(AV) (A) Average Power Loss (Watts) Average Forward Current - IF(AV) (A) Non-Repetitive Surge Current - I FSM (A) Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) 100 110 120 130 140 150 0 1 02 03 04 05 06 07 08 09 0 DC see note (2) Square wave (D = 0.50) 80% Rated Vr applied 0 1 02 03 04 05 06 07 08 0 DCRMS Limit D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 100 1000 10000 10 100 1000 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge

110CNQ045APbF, 110CNQ045ASMPbF Bulletin PD-21000 01/05 www.irf.com Outline Table Outline D61-8-SM Dimensions are in millimeters and (inches) Outline D61-8 Dimensions are in millimeters and (inches)

110CNQ045APbF, 110CNQ045ASMPbF Bulletin PD-21000 01/05 www.irf.com THIS IS A 110CNQ045A WITH LOT CODE 89 09 ASSEMBLED ON WW 45, 2000 ASSEMBLY LOT CODE RECTIFIER INTERNATIONAL LOGO P = LEAD-FREE YEAR 0 = 2000 WEEK 45 DATE CODE 110CNQ045A 89 09 045P PART NUMBER LOT CODE 89 09 ASSEMBLED ON WW 45, 2000 LOT CODE ASSEMBLY RECTIFIER INTERNATIONAL LOGO YEAR 0 = 2000 P = LEAD-FREE WEEK 45 DATE CODE 89 09 045P PART NUMBER THIS IS A 110CNQ045ASM WITH 110CNQ045ASM Marking Information Outline D61-8 Outline D61-8-SM

110CNQ045APbF, 110CNQ045ASMPbF Bulletin PD-21000 01/05 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/05 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. Ordering Information Table

110 C N Q 045 A PbF

1 - Current Rating (110 = 110A) 2 - Circuit Configuration C = Common Cathode N = D-61 4 - Schottky "Q" Series 5 - Voltage Rating (045 = 45V) 6 - y A = D-61-8 package style y ASM = D-61-8-SM package style 7 - y none = Standard Production y PbF = Lead-Free Standard pack quantity: A = 10 pieces ASM = 20 pieces