11-21-GHC-YT1U2-2T EVERLIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS complaint version. Descriptions ․The 11-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Material Emitted Color Lens Color 11-21/GHC-YT1U2/2T InGaN Brilliant Green Water Clear
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali Package Outline Dimensions - + Notes: The tolerances unless mentioned are ±0.1, unit=mm.
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V R 5 V Forward Current I F 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge(HBM) ESD 150 V Power Dissipation Pd 110 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 285 ----- 715 mcd Viewing Angle 2 θ1/2 ----- 60 ----- deg Peak Wavelength λp ----- 518 ----- nm Dominant Wavelength Spectrum Radiation Bandwidth △λ ----- 35 ----- nm Forward Voltage V F 2.7 3.3 3.7 V IF =20mA Reverse Current I R ----- ----- 50 μA VR =5V Notes: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali Bin Range Of Dom. Wavelength Groups Bin Min Max Unit Condition X 520 525 Y 525 530 Y Z 530 535 nm I F=20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition T1 258 360 T2 360 450 U1 450 565 U2 565 715 mcd I F =20mA Notes: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali Typical Electro-Optical Characteristics Curves
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali xxxxxx xxxxxx xxxxxxxxxxxx xxxx xxxxxxxx RoHS Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned are ±0.1, Unit = mm.
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned are ±0.1, Unit = mm. Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year.(To fit the MSL-2 .) 2.4 After opening the package, the LEDs should be kept at 30 ℃ or less and 60%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition
3.1 Pb-free solder temperature profile
2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD. 11-21/GHC-YT1U2/2T Device No:SZDSE-111-G03 Prepared date: 18-Aug-2005 Prepared by: Meng Yali 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com