10BJ LEIDITECH

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

◆ 1000W peak pulsepower capability at 10 x 1000μs waveform, repetition rate (duty cycle): 0.01% ◆ Glass Passivated chip junction ◆ For surface mounted applications to optimize board space ◆ Low profile package ◆ Built-in strain relief ◆ Low incremental surge resistance ◆ Excellent clamping capability ◆ Plastic package has UL flammability classification 94V-O ◆ Fast response time: typically less than 1.0ps from 0 Volts to BV min ◆ Typical IR less than 1uA above 12V ◆ High temperature soldering: 260°C/40 seconds at terminals ◆ IEC-61000-4-2 ESD 15KV(Air),8KV(Contact) ◆ ESD protection of data lines in accordance with IEC 61000-4-2(IEC801-2) ◆ EFT protection of data lines in accordance with IEC61000-4-4(IEC801-4) 10BJ Series 1000W Transient Voltage Suppressor Rev : www.leiditech.com 01.06.2018 1/6 10SMBJ

Applications

TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Maximum Ratings and Electrical Characteristics (TA=25℃ unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation at TA=25℃ by 10x1000μs waveform (Fig.2)(Note 1) (Note 2) PPPM 1000 W Power Dissipation on infinite heat sink at TA=50℃ PD 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only(Note 3) IFSM 150 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only VF 3.5V/5.0 V Operating Junction and Storage Temperature Range TJ, TSTG -55 to ＋150 ℃ Typical Thermal Resistance Junction to Lead RuJL 15 ℃/W Typical Thermal Resistance Junction to Ambient RuJA 75 ℃/W Notes: 1. Non-repetitive current pulse, per Fig.3and derated above TA=25℃per Fig. 2. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. Rev : www.leiditech.com 01.06.2018 2/6 10BJ Series 1000W Transient Voltage Suppressor

Electrical Characteristics

VBR(V)MAX. @IT TEST CURRENT REVERSE LEAKAGE @VRWM PEAK PULSE CURRENT MAXIMUM CLAMPING VOLTAGE @Ipp BI- POLAR UNI-POLAR VRWM (V) VBR MIN(V) VBR MAX(V) IT (mA) IR (µA) Ipp (A) Vc (v) Notes: For bidirectional type having VRWM of 20 volts and less, the IR limit is double. For parts without A (VBR is ± 10% and VC is 5% higher than A parts I-V Curve Characteristics Rev : www.leiditech.com 01.06.2018 3/6 10BJ Series 1000W Transient Voltage Suppressor 10SMBJ5.0CA 10SMBJ6.0CA 10SMBJ8.0CA 10SMBJ12CA 10SMBJ15CA 10SMBJ18CA 10SMBJ20CA 10SMBJ33CA 10SMBJ5.0A 10SMBJ6.0A 10SMBJ8.0A 10SMBJ12A 10SMBJ15A 10SMBJ18A 10SMBJ20A 10SMBJ33A

(1) (2) (3) (4) (1) SERIES. (2) VR VOLTAGE. (3) BI-DIRECTIONAL AND UNI-DIRECTIONAL. (4) 5% VOLTAGE TOLERANCE. Product Dimensions Dimension Inches Millimeters MIN MAX MIN MAX A 0.134 0.155 3.40 3.94 B 0.205 0.22 5.21 5.59 C 0.075 0.083 1.90 2.11 D 0.166 0.185 4.22 4.70 E 0.036 0.056 0.91 1.42 F 0.073 0.087 1.85 2.2 G 0.002 0.008 0.05 0.20 H 0.077 0.094 1.95 2.40 J 0.043 0.053 1.09 1.35 K 0.008 0.014 0.20 0.35 L 0.039 0.049 0.99 1.24 A C D B H K E J F L G .079 2.0 .079 2.0 0.110 2.8 Rev : www.leiditech.com 01.06.2018 5/6 10BJ Series 1000W Transient Voltage Suppressor 10SMBJ10SMBJ

Solder Reflow Recommendations

  • Recommended reflow methods: IR, vapor phase oven, hot air oven, wave solder.
  • The device can be exposed to a maximum temperature of 265°C for 10 seconds.
  • Devices can be cleaned using standard industry methods and solvents. Notes: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Summary of Packing Options Package Type Description Packing Quantity Industry Standard DO-214AA(SMB) Embossed Carrier Reel Pack 3000PCS EIA-481-D Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 Rev : www.leiditech.com 01.06.2018 6/6 10BJ Series 1000W Transient Voltage Suppressor