109009

109009 PHOENIX

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 54

Technical content

1 Description

Command Line Interface (CLI): Commands for the Smart Camera Box SCX CLI... © PHOENIX CONTACT Data sheet Command Line Interface (CLI) is a text-based option for switch configuration and diagnostics. You can access the CLI via Telnet or SSH. To use the CLI, you must first enable it in the web-based management of the Smart Camera Box. To do so, observe the information in the user manual UM EN SCX XPOE... This document is valid for the following products: – SCX 4POE 2LX, 1102626 – SCX 2POE 2LX, 1108543 – SCX 4POE 2T, 1108542 – SCX 2POE 2T, 1108544 This application note does not replace the device-specific documents. Please follow the safety notes on the associated packing slips and in the user manual. Make sure you always use the latest documentation. It can be downloaded from the product at phoenixcontact.net/products. 109009_en_00 2021-03-10

SCX CLI... 109009_en_00 PHOENIX CONTACT 2/54

2 Table of contents

SCX CLI... 109009_en_00 PHOENIX CONTACT 3/54

3 Command Line Interface (CLI)

3.1 Access

The CLI is accessed via a Telnet or SSH connection from a management host, e.g. a PC. You can use the Windows® command prompt or the PuTTY freeware tool as an input terminal. The device requires an IP address and a subnet mask in order to access the CLI. The user manual UM EN SCX XPOE... contains a description of how to configure the parameters. Figure 1 Configuration of a Telnet connection in PuTTY Figure 2 Command terminal in PuTTY Figure 3 Establishing a Telnet connection via Windows® command prompt Figure 4 Command terminal in Windows® command prompt

SCX CLI... 109009_en_00 PHOENIX CONTACT 4/54

3.2 CLI commands

The parameters of a command may be mandatory, optional, or a selection of values.

3.3 Syntax

A command consists of one or more words that can be followed by one or more parameters. The parameters can be mandatory or optional values. values after the command name. You must enter the parameters in the specified order. Mandatory parameters must always be entered first, and then the optional parameters.

3.4 Help

To have all currently available commands displayed, enter a question mark in the command prompt. If you type a question mark after every entry, all the commands available after that point will be displayed. Figure 5 Available command designations or parameters Character Example Description < > <Value> Mandatory parameters: You must enter the parameter. [ ] [Value] Optional parameters: You can enter the parameter instead of the brackets. { } {choice1 | choice2} You must select the value from a specific list of values. | choice1 | choice2 The hyphen separates mutually exclusive selection options. [{ }] [{choice1 | choice2}] Selection from a list of values within an optional parameter network parms <ipaddr> <netmask> [gateway]  = Correct  = FalseMandatory Mandatory Optional network parms 192.168.10.42  network parms 255.255.255.0 

SCX CLI... 109009_en_00 PHOENIX CONTACT 5/54 If Help displays a parameter in angle brackets, you must replace the parameter with a value. Figure 6 Mandatory parameter If at any point there are no further command names or parameters available, or if further parameters are optional, the following message will appear as output. Figure 7 Press Enter

3.5 Autocomplete

If you have entered enough letters to uniquely identify a command, press the space bar or tab. Autocomplete will supplement the command. Figure 8 Autocomplete

SCX CLI... 109009_en_00 PHOENIX CONTACT 6/54

3.6 CLI Network Scripting UI

The CLI Network Scripting UI enables CLI commands from scripts to be loaded onto the device via the network. You can configure and diagnose the device as is with a PC via URL or from a controller. In the process, the device will confirm each command entry. The command must fulfill a specific syntax: Examples of commands with the correct syntax Change device name: http://192.168.10.42/php/command.php?usr=admin&pwd=private&cmd=device-identity name Switch2000 Figure 9 Change device name Display network parameters, change user password: http://192.168.10.42/php/command.php?usr=admin&pwd=private&cmd=show network | users passwd private2 Figure 10 Display network parameters, change user password Command type Switch response config OK show Switch data output

SCX CLI... 109009_en_00 PHOENIX CONTACT 7/54

4 General commands

ID Command Value range Default Answer GCom001 reload OK

Description

Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer GCom002 logout Exit the CLI session (unsaved changes will be lost). Example logout Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer GCom003 help Commandline help Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer GCom004 quit Exit the CLI session (unsaved changes will be lost). Example quit Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 8/54

5 System commands

ID Command Value range Default Answer GCom006 users passwd <username> <old-password> <new- password> <repeat-new- password> <username> Current user name <old-password> Current password <new-password> New password (8 - 64 chars) <username> = admin <password> = private OK user passwd admin private Switch123 Switch123 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer SCom001 show version ERROR Display the device description and hardware information: Serial number Hardware version Firmware version Bootloader version Example show version Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer SCom002 show sys-info OK + Parameter Liste System information display: Device name Object ID Device description Contact person Device location System runtime Example show sys-info Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 9/54 ID Command Value range Default Answer SCom003 device-identity name <name> <name> max. 256 chars <name> = leer OK device-identity name Switch2008_2 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer SCom004 device-identity description <description> <description> max. 256 chars <description> = leer OK Change the device description Example device-identity description Switch 2008 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer SCom005 device-identity location <lo- cation> <location> max. 256 chars <location> = leer OK Change the device location Example device-identity location Building 2 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer SCom006 device-identity contact <contact> <contact> max. 256 chars <contact> = leer OK device-identity contact Mr. Doe Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 10/54

6 Event Table commands

7 MAC Address Table commands

ID Command Value range Default Answer ETab001 show event-table Entries of event table Display the event table with the following columns: Index Event Device runtime Example show event-table Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer ETab002 clear event-table OK Delete/clear the event table Example clear event-table Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MTab001 management-access {en- able | disable} OK + MAC address table Display the MAC address table Example show mac-address-table Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 11/54

8 FW Image Handling commands

9 Script Handling commands

ID Command Value range Default Answer MTab002 wlan global-activation enable: WLAN on disable: WLAN off disable OK The “LNK” LED lights up when the WLAN interface is enabled Example wlan global-activation enable Device range As of firmware version FLOS product range FL WLAN 1100/2100 1.0 FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer FImg001 management-access {en- able | disable} <ip-address> IP address (xxx.xxx.xxx.xxx) <filename> File name of the firmware image OK Transfer of a firmware image file to the device. The firmware update is performed immediately, the device then restarts and the CLI connection is terminated. Example file-transfer tftp write-to-device firmware 192.168.0.1 FL_SWITCH_2000_v1_00.bin Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer Scpt001 management-access {enable | disable} Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 12/54

10 Network commands

ID Command Value range Default Answer Scpt002 wlan global-activation enable: WLAN on disable: WLAN off disable OK The “LNK” LED lights up when the WLAN interface is enabled Example wlan global-activation enable Device range As of firmware version FLOS product range FL WLAN 1100/2100 1.0 FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer NW001 show network OK + Parameters Display the current network parameters: IP address assignment (static, BootP, DHCP) IP address Network mask Default gateway Management VLAN Address Conflict Detection (ACD) mode Example show network Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer NW002 network parms <ip-ad- dress> <netmask> [gate- way] <ip-address> IP address (xxx.xxx.xxx.xxx) <netmask> Subnet mask (xxx.xxx.xxx.xxx) [gateway] Default gateway (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 <netmask> = 0.0.0.0 [gateway] = 0.0.0.0 OK Change the network parameters: IP address Network mask Default gateway Example Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 13/54 ID Command Value range Default Answer NW003 network protocol {bootp | dhcp | none} {bootp | dhcp | none} Selec- tion of the network protocol for IP address assignment bootp OK Change the IP address assignment Example network protocol dhcp Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer NW004 network mgmt-vlan <vlan- id> <vlan-id> VLAN ID (1 - 4000) <vlan-id> = 1 OK Change the management VLAN Example network mgmt-vlan 2 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer NW005 network acd-mode {acd | none} {acd | none} Selection of the ACD mode none OK Change the ACD (Address Conflict Detection) mode Example network acd-mode acd Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 14/54

11 FLOS Services commands

ID Command Value range Default Answer Mng001 show service OK + parameter Status indicator for all of the following services: Web server SNMP server CLI service CLI network scripting UI (CLI command entry via URL) Example show service Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer Mng002 service cli-service {disable | telnet | ssh} {disable | telnet | ssh} Selec- tion of the CLI service proto- col telnet OK Change the CLI service protocol Example service cli-service telnet Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer Mng004 service web-server {disable | http | https} {disable | http | https} Selec- tion of the web server proto- col http OK Change the web server protocol Example service web-server https Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 15/54

12 LLDP commands

ID Command Value range Default Answer Mng005 service snmp-agent {disable | snmp-v2 | snmp-v3} {disable | snmp-v2 | snmp- v3} Selection of the SNMP version snmp-v2 OK service snmp-agent snmp-v2 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer LLDP001 show lldp topology all OK + LLDP topology table Tabular display of the LLDP topology with the following columns: Local port Chassis ID of the connected device IP address of the connected device Remote port of the connected device Description of the remote port on the connected device Example show lldp topology all Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer LLDP002 show lldp global OK + Parameters Display the configuration parameters: LLDP status LLDP transmission interval LLDP transmit port LLDP receive port Example show lldp global Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 16/54 ID Command Value range Default Answer LLDP003 show lldp topology port-no <port-no> <port-no> Port number OK + LLDP port topology Display the topology information at a port: Complete chassis ID Complete port name System name System description Example show lldp topology port-no 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer LLDP004 lldp status {enable | disable} {enable | disable} Enable/ disable enable OK Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer LLDP005 lldp tx-interval <value> <value> Interval in seconds (5 - 32768) 5 OK Change the LLDP transmission interval Example lldp tx-interval 10 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer LLDP006 lldp port-tx enable <port- list> <port-list> Comma-sepa- rated list of port numbers all enable OK Activation of the LLDP transmit ports Example lldp port-tx enable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 17/54 ID Command Value range Default Answer LLDP007 lldp port-tx disable <port- list> <port-list> Comma-sepa- rated list of port numbers no disable OK Deactivation of the LLDP transmit ports Example lldp port-tx disable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer LLDP008 lldp port-rx enable <port- list> <port-list> Comma-sepa- rated list of port numbers all enable OK Activation of the LLDP receive ports Example lldp port-rx enable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer LLDP009 lldp port-rx disable <port- list> <port-list> Comma-sepa- rated list of port numbers no disable OK Deactivation of the LLDP receive ports Example lldp port-rx disable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 18/54

13 Port Features commands

ID Command Value range Default Answer PFtr001 show port-info all OK + parameter Display the basic parameters of all ports: Port number Port name Port type Port status Port mode Example show port-info all Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr002 show port-info port-no <port-no> <port-no> Port number OK + parameter Display the basic parameters of one port: Port number Port name Port type Port status Port mode Status flow control Status link monitoring Example show port-info port-no 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr003 show port-stat port-no <port-no> <port-no> Port number OK + parameter Display the port statistics of one port Example show port-stat port-no 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 19/54 ID Command Value range Default Answer PFtr004 show port-util port-no <port- no> <port-no> Port number OK + parameter Display the RX and TX utilization of one port Example show port-util port-no 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr005 show port-util all OK + parameter Display the RX and TX utilization of all ports Example show port-util all Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr006 port <port-no> admin-mode {enable | disable} <port-no> Port number {enable | disable} Enable/ disable all enable OK Activation/deactivation of a port Example port 3 admin-mode disable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr007 port <port-no> modus au- toneg <port-no> Port number OK Activation/deactivation of auto-negotiation on one port Example port 3 modus autoneg Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 20/54 ID Command Value range Default Answer PFtr008 port <port-no> modus au- to10_100 <port-no> Port number OK Activation/deactivation of auto-negotiation on one port (only 10/100 Mbps, not 1000 Mbps) Example port 3 modus auto10_100 Device range As of firmware version FLOS product range FL SWITCH 2000 2.01 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr009 port <port-no> modus speed <speed> {half-duplex | full-duplex} <port-no> Port number <speed> Transmission speed in Mbps (selection options: {10 | 100 | 1000}) {half-duplex | full-duplex} Selection of the duplex mode OK Change the transmission speed and duplex mode on one port Example port 3 modus speed 100 half-duplex Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr010 port <port-no> modus fast- startup <port-no> Port number OK Activation/deactivation of Fast Startup mode on one port. Example port 3 modus faststartup Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 21/54 ID Command Value range Default Answer PFtr011 port <port-no> description <text> <port-no> Port number <text> Port designation (0 - 31 chars) <text> = leer OK port 3 description RingPort1 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr012 port <port-no> link-monitor- ing {enable | disable} <port-no> Port number {enable | disable} Enable/disable all disable OK Activation/deactivation of link monitoring on one port Example port 3 link-monitoring disable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PFtr013 port <port-no> flow-control {enable | disable} <port-no> Port number {enable | disable} Enable/disable all disable OK Activation/deactivation of flow control on one port Example port 3 flow-control disable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 22/54

14 Port Mirroring commands

ID Command Value range Default Answer PMir001 show port-mirror OK + parameter Display the port mirroring parameters: Global status Receive port (mirroring port) Mirrored ports (incoming traffic) Mirrored ports (outgoing traffic) Example show port-mirror Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PMir002 port-mirror status {enable | disable} {enable | disable} Enable/disable disable OK Activation/deactivation of the global port mirroring status Example port-mirror status enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PMir003 port-mirror dest <port-no> <port-no> Port number 1 OK Change the receive port (mirroring port) Example port-mirror dest 8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PMir004 port-mirror ingress enable <port-list> <port-list> Comma-sepa- rated list of port numbers all disable OK Activation of RX port mirroring (incoming traffic) on multiple ports Example port-mirror ingress enable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 23/54

15 VLAN commands

ID Command Value range Default Answer PMir005 port-mirror ingress disable <port-list> <port-list> Comma-sepa- rated list of port numbers all disable OK Deactivation of RX port mirroring (incoming traffic) on multiple ports Example port-mirror ingress disable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PMir006 port-mirror egress enable <port-list> <port-list> Comma-sepa- rated list of port numbers all disable OK Activation of TX port mirroring (outgoing traffic) on multiple ports Example port-mirror egress enable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer PMir007 port-mirror egress disable <port-list> <port-list> Comma-sepa- rated list of port numbers all disable OK Deactivation of TX port mirroring (outgoing traffic) on multiple ports Example port-mirror egress disable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan001 show vlan global OK + parameter Display the current VLAN mode Example show vlan global Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 24/54 ID Command Value range Default Answer VLan002 show vlan static-table OK + VLAN static table Display the static VLAN table: VLAN ID VLAN name Device ports (untagged) Device ports (tagged) Example show vlan static-table Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan003 show vlan current-table Display the current VLAN table: VLAN ID VLAN name Device ports (untagged) Device ports (tagged) Example show vlan current-table Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer VLan004 show vlan port-table OK + VLAN port table Display the port-based static VLAN table for all ports: VLAN ID VLAN name Device ports (untagged) Device ports (tagged) Example show vlan port-table Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 25/54 ID Command Value range Default Answer VLan005 show vlan port <port-no> <port-no> Port number OK + parameter Display the port-based static VLAN table for one port: VLAN ID VLAN name Device ports (untagged) Device ports (tagged) Example show vlan port 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan006 show vlan vlan-id <vlan-id> <vlan-id> VLAN ID (1 - 4000) OK + parameter Display the VLAN information for a VLAN: VLAN ID VLAN name Device ports (untagged) Device ports (tagged) Example show vlan vlan-id 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan007 vlan status {transparent | tagged} {transparent | tagged} Selection of the VLAN mode transparent OK Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 26/54 ID Command Value range Default Answer VLan008 vlan create <vlan-id> <vlan-id> VLAN ID (1 - 4000) OK Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan009 vlan delete <vlan-id> <vlan-id> VLAN ID (1 - 4000) OK Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan010 vlan static <vlan-id> name <vlan-name> <vlan-id> VLAN ID (1 - 4000) <vlan-name> VLAN name (0 - 31 chars) OK Change the name of a static VLAN Example vlan static 5 name VLAN_5 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan011 vlan static <vlan-id> tagged- mem-ports <port-list> <vlan-id> VLAN ID (1 - 4000) <port-list> Comma-sepa- rated list of port numbers OK Assignment of device ports (tagged) to a VLAN Example vlan static 5 tagged-mem-ports Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 27/54 ID Command Value range Default Answer VLan012 vlan static <vlan-id> un- tagged-mem-ports <port- list> <vlan-id> VLAN ID (1 - 4000) <port-list> Comma-sepa- rated list of port numbers OK Assignment of device ports (untagged) to a VLAN Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan013 vlan static <vlan-id> no- member <port-list> <vlan-id> VLAN ID (1 - 4000) <port-list> Comma-sepa- rated list of port numbers OK Removal of device ports from a VLAN Example vlan static 5 no-member Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan014 vlan port <port-no> vlan <vlan-id> <port-no> Port number <vlan-id> VLAN ID (1 - 4000) OK Assignment of a default VLAN ID to a port Example vlan port 3 vlan 5 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer VLan015 vlan port <port-no> priority <value> <port-no> Port number <value> Priority (0 - 7) 0 OK Assignment of a default priority to a port Example vlan port 3 priority Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 28/54

16 Multicast commands

ID Command Value range Default Answer VLan016 vlan port <port-no> ingress- filter {enable | disable} <port-no> Port number {enable | disable} Enable/disable all disable OK Activation/deactivation of the ingress filter at a port Example vlan port 3 ingress-filter disable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC001 show multicast igmp OK + parameter Display the IGMP snooping information: Status IGMP Snooping Snoop Aging Time IGMP Query Version Query interval Status of IGMP extension FUQ Status of IGMP extension BUQ Status of IGMP extension auto query port List of static query ports Example show multicast igmp Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC002 show multicast static- groups OK + parameter list Tabular display of the static multicast groups with the following columns: Multicast address VLAN ID Member ports including status Example show multicast static-groups Device range As of firmware version FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 29/54 ID Command Value range Default Answer MC003 show multicast current- groups OK + current multi- cast groups Tabular display of the current multicast groups with the following columns: VLAN ID Multicast address Port member Example show multicast current-groups Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC004 multicast igmp snoop status {enable | disable} {enable | disable} Enable/disable disable OK Activation/deactivation of IGMP snooping Example multicast igmp snoop status enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC005 multicast igmp snoop aging <value> <value> Aging time in seconds (30 - 3600) <value> = 300 OK multicast igmp snoop aging Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC006 multicast igmp querier ver- sion {disable | v1 | v2} {disable | v1 | v2} Selection of the querier version disable OK Change the querier version Example multicast igmp querier version v2 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 30/54 ID Command Value range Default Answer MC007 multicast igmp querier inter- val <value> <value> Querier interval in seconds (10 - 3600) <value> = 125 OK Change the querier interval Example multicast igmp querier interval Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC008 multicast igmp extension fuq {enable | disable} {enable | disable} Enable/disable enable OK Activation/deactivation of the IGMP extension FUQ Example multicast igmp extension fuq enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC009 multicast igmp extension buq {enable | disable} {enable | disable} Enable/disable enable OK Activation/deactivation of the IGMP extension BUQ Example multicast igmp extension buq enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC010 multicast igmp extension auto-query {enable | dis- able} {enable | disable} Enable/disable enable OK Activation/deactivation of the IGMP extension auto query port Example multicast igmp extension auto-query disable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 31/54 ID Command Value range Default Answer MC011 multicast igmp extension clear-auto-query OK Delete all auto query ports Example multicast igmp extension clear-auto-query Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC012 multicast igmp extension static-query-port add <port- list> <port-list> Comma-sepa- rated list of port numbers OK multicast igmp extension static-query-port add Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC013 mutlicast igmp extension static-query-port remove <port-list> <port-list> Comma-sepa- rated list of port numbers OK multicast igmp extension static-query-port remove Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer MC014 multicast static create <mac-address> <vlan-id> <mac-address> Multicast MAC address (xx:xx:xx:xx:xx:xx) <vlan-id> Multicast VLAN ID OK Generate a new static multicast group Example multicast static create 01:00:5e:00:18:0e 1 Device range As of firmware version FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 32/54 ID Command Value range Default Answer MC015 multicast static delete <mac-address> <vlan-id> <mac-address> Multicast MAC address (xx:xx:xx:xx:xx:xx) <vlan-id> Multicast VLAN ID OK Delete an existing static multicast group Example multicast static delete 01:00:5e:00:18:0e 1 Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer MC016 multicast static configure <mac-address> <vlanid> static-mem-ports <port-list> <mac-address> Multicast MAC address (xx:xx:xx:xx:xx:xx) <vlan-id> Multicast VLAN ID <port-list> Comma-sepa- rated list of port numbers OK Add ports to a static multicast group Example multicast static configure 01:00:5e:00:18:0e 1 static-mem-ports 3,5,8 Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer MC017 multicast static configure <mac-address> <vlanid> forbidden-mem-ports <port- list> <mac-address> Multicast MAC address (xx:xx:xx:xx:xx:xx) <vlan-id> Multicast VLAN ID <port-list> Comma-sepa- rated list of port numbers OK Forbid membership of ports in a static multicast group Example multicast static configure 01:00:5e:00:18:0e 1 forbidden-mem-ports 3,5,8 Device range As of firmware version FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 33/54

17 RSTP commands

ID Command Value range Default Answer MC018 multicast static configure <mac-address> <vlanid> no-member <port-list> <mac-address> Multicast MAC address (xx:xx:xx:xx:xx:xx) <vlan-id> Multicast VLAN ID <port-list> Comma-sepa- rated list of port numbers OK Delete ports from a static multicast group Example multicast static configure 01:00:5e:00:18:0e 1 no-member 3,5,8 Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP001 show spanning-tree global OK + Parameter RSTP information display: Status RSTP Mode Status Large Tree Support Status Fast Ring Detection Bridge Priority Bridge Hello Time Bridge Forward Delay Bridge Max Age Root MAC address Root Port Root Cost Number of topology changes Last topology change Hello Time Forward Delay Max Age Example show spanning-tree global Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 34/54 ID Command Value range Default Answer RSTP002 show spanning-tree port port-no <port-no> <port-no> Port number OK + parameter Display the RSTP information for a specific port: Status RSTP Mode Admin Path Cost Operating Path Cost Status Auto Edge Status Admin Edge Status Operating Edge Priority Number of forward transitions MAC address of the root MAC address of the bridge Port ID Cost Example show spanning tree port port-no 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP003 show spanning-tree port all OK + Port Tabular display of the RSTP information for a specific port with the following columns: Port number Status RSTP Mode Path Cost Operating Edge Blocking State Protocol Role Example show spanning-tree port all Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 35/54 ID Command Value range Default Answer RSTP004 spanning-tree status {dis- able | 802.1d} {disable | 802.1w} Disable/enable Firmware revision 1.00: dis- able From Firmware revision 2.01: 802.1w OK Activation/deactivation of RSTP Example spanning-tree status 802.1w Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP005 spanning-tree lts {enable | disable} {enable | disable} Enable/disable disable OK Activation/deactivation of Large Tree Support Example spanning-tree lts enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP006 spanning-tree frd {enable | disable} {enable | disable} Enable/disable disable OK Activation/deactivation of Fast Ring Detection Example spanning-tree frd enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP007 spanning-tree bdg-prio <value> <value> Bridge Priority (0 - 61440 in increments of 4096) <value> = 32768 OK Change the Bridge Priority Example spanning-tree bdg-prio 4096 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 36/54 ID Command Value range Default Answer RSTP008 spanning-tree hello-time <value> <value> Hello time in sec- onds (1 - 10) <value> = 2 OK Change the Bridge Hello Time Example spanning-tree hello-time 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP009 spanning-tree fwd-delay <value> <value> Bridge Forward Delay in seconds (4 - 30) <value> = 15 OK Change the Bridge Forward Delay Example spanning-tree fwd-delay 20 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP010 spanning-tree max-age <value> <value> Bridge Max Age in seconds (6 - 40) <value> = 20 OK Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP011 spanning-tree port <port- no> status {enable | disable} <port-no> Port number {enable | disable} Enable/disable all enable OK Activation/deactivation of RSTP for a specific port Example spanning-tree port 3 status disable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 37/54 ID Command Value range Default Answer RSTP012 spanning-tree port <port- no> path-cost <value> <port-no> Port number <value> Path cost (0 = auto- matic detection based on the current port speed; 1 - 200000000 = manual set- ting) <value> = 0 OK Change the path cost for a specific port Example spanning-tree port 3 path-cost 20000 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP013 spanning-tree port <port- no> auto-edge {enable | dis- able} <port-no> Port number {enable | disable} Enable/disable all enable Activation/deactivation of Auto Edge for a specific port Example spanning-tree port 3 auto-edge enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP014 spanning-tree port <port- no> admin-edge {edge | non-edge} <port-no> Port number {edge | non-edge} Selection of Admin Edge all non-edge Activation/deactivation of Admin Edge for a specific port Example spanning-tree port 3 admin-edge non-edge Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 38/54

18 Security Context commands

ID Command Value range Default Answer RSTP015 spanning-tree port <port- no> priority <value> <port-no> Port number <value> Priority (0 - 240 in increments of 16) <value> = 128 OK Change the priority for a specific port Example spanning-tree port 3 priority 192 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer RSTP016 spanning-tree port <port- no> force-rstp <port-no> Port number OK Force change from STP to RSTP for a specific port Example spanning-tree port 3 force-rstp Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer SecC001 show sec-context OK + parameter Display the security context status Example show sec-context Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer SecC002 sec-context generate OK Generate a security context Example sec-context generate Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 39/54

19 DHCP commands

ID Command Value range Default Answer SecC003 file-transfer {tftp | http} {write-to-device | read-from- device} sec-context <ip-ad- dress> <filename> {tftp | http} Selection of the transfer method {write-to-device | read-from- device} Selection of the transfer direction <ip-address> IP address (xxx.xxx.xxx.xxx) <filename> File name of the root CA certificate OK Transfer of a root CA certificate file to the device or from the device to the PC. Example file-transfer tftp write-to-device sec-context 192.168.0.1 cacert.cer Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP001 show dhcp global OK + parameter Display the global DHCP status Example show dhcp global Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP002 show dhcp server current- lease OK + lease table Tabular display of the current DHCP leases (assigned IP addresses): Number Assigned IP address MAC address of the device Local port Status Example show dhcp server current-lease Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 40/54 ID Command Value range Default Answer DHCP003 show dhcp server static- lease OK + lease table Tabular display of the current static DHCP leases (assigned IP addresses): Number Assigned IP address MAC address of the device Example show dhcp server static-lease Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP004 show dhcp server port-local <port-no> <port-no> Port number OK + parameter Display the port-based DHCP server information: Port Status of the port-based DHCP server IP address Subnet mask Default gateway DNS server Example show dhcp server port-local 3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP005 dhcp-service service {none | relay-agent | server} {none | relay-agent | server} Selection of the DHCP server operating mode none OK Set the operating mode of the DHCP server Example dhcp-service service server Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 41/54 ID Command Value range Default Answer DHCP006 dhcp-service relay-agent re- mote-id {ip | mac} {ip | mac} Selection of the relay agent remote ID ip OK Change the relay agent remote ID Example dhcp-service relay-agent remote-id mac Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP007 dhcp-service relay-agent server <ip-address> <ip-address> IP address (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 OK Change the DHCP server in relay agent mode Example dhcp-service relay-agent server 192.168.0.2 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP008 dhcp-service relay-agent port-mode enable <port- list> <port-list> Comma-sepa- rated list of port numbers OK Activation of the relay agent on multiple ports Example dhcp-service relay-agent port-mode enable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP009 dhcp-service relay-agent port-mode disable <port- list> <port-list> Comma-sepa- rated list of port numbers OK Deactivation of the relay agent on multiple ports Example dhcp-service relay-agent port-mode disable 3,4,8 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 42/54 ID Command Value range Default Answer DHCP010 dhcp-service server pool- start-addr <ip-address> <ip-address> IP address (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 OK Change the start address of the DHCP pool Example dhcp-service server pool-start-addr 192.168.0.3 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP011 dhcp-service server pool- size <size> <size> DHCP pool size (depends on subnet) <size> = 32 OK Change the maximum number of IP addresses specified by the DHCP server (size of the address pool) Example dhcp-service server pool-size 20 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP012 dhcp-service server net- mask <net-mask> <net-mask> Subnet mask (xxx.xxx.xxx.xxx) <net-mask> = 0.0.0.0 OK Change the subnet mask that is assigned to the DHCP clients Example dhcp-service server net-mask 255.255.255.0 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP013 dhcp-service server router- ip <ip-address> <ip-address> IP address (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 OK Change the default gateway that is assigned to the DHCP clients Example dhcp-service server router-ip 192.168.0.1 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 43/54 ID Command Value range Default Answer DHCP014 dhcp-service server dns-ip <ip-address> <ip-address> IP address (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 OK Change the DNS server that is assigned to the DHCP clients Example dhcp-service server dns-ip 192.168.10.10 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP015 dhcp-service server lease- time <value> <value> DHCP lease time in seconds (300 - 2592000) <value> = 3600 OK Change the DHCP lease time (validity of the IP address assignment) Example dhcp-service server lease-time 3600 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP016 dhcp-service server accept- bootp {enable | disable} {enable | disable} Enable/disable enable OK Activation/deactivation of the acceptance of BootP requests by the DHCP server Example dhcp-service server accept-bootp enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP017 dhcp-service server static- lease create <ip-address> <client-mac-address> <ip-address> IP address (xxx.xxx.xxx.xxx) <client-mac-address> Client MAC address (xx:xx:xx:xx:xx:xx) OK Create a static IP assignment (DHCP lease) for a defined client address (MAC address) Example dhcp-service server static-lease create 192.168.0.20 XX:XX:XX:6C:D2:05 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 44/54 ID Command Value range Default Answer DHCP018 dhcp-service server static- lease delete <ip-address> <ip-address> IP address (xxx.xxx.xxx.xxx) OK Delete a statically assigned IP address (DHCP lease) Example dhcp-service server static-lease delete 192.168.0.20 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP019 dhcp-service server static- lease clear OK Delete all static IP assignments (DHCP lease) Example dhcp-service server static-lease clear Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP020 dhcp-service server port- local <port-no> status {en- able | disable} <port-no> Port number {enable | disable} Enable/disable all disable OK Activation/deactivation of a port-based DHCP server Example dhcp-service server port-local 3 status enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP021 dhcp-service server port- local <port-no> local-ip <ip- address> <port-no> Port number <ip-address> IP address (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 OK Change an IP address assigned by a port-based DHCP server Example dhcp-service server port-local 3 local-ip 192.168.0.30 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 45/54 ID Command Value range Default Answer DHCP022 dhcp-service server port- local <port-no> net-mask <net-mask> <port-no> Port number <net-mask> Subnet mask (xxx.xxx.xxx.xxx) <net-mask> = 0.0.0.0 OK Change a subnet mask assigned by a port-based DHCP server Example dhcp-service sercer port-local 3 net-mask 255.255.255.0 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP023 dhcp-service server port- local <port-no> router-ip <ip-address> <port-no> Port number <ip-address> IP address (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 OK Change a default gateway address assigned by a port-based DHCP server Example dhcp-service server port-local 3 router-ip 192.168.0.1 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP024 dhcp-service server port- local <port-no> dns-ip <ip- address> <port-no> Port number <ip-address> IP address (xxx.xxx.xxx.xxx) <ip-address> = 0.0.0.0 OK Change a DNS server address assigned by a port-based DHCP server Example dhcp-service server port-local 3 dns-ip 192.168.10.10 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer DHCP025 dhcp-service server port- local-clear OK Delete all port-based DHCP servers Example dhcp-service server port-local-clear Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 46/54

20 QoS commands

ID Command Value range Default Answer QOS001 show broadcast-limiter OK + parameter Display the broadcast limiter information: Status of the broadcast limiter Broadcast threshold value Status of the multicast limiter Multicast threshold value Status of the unknown unicast limiter Unknown unicast threshold value Example show broadcast-limiter Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer QOS002 broadcast-limiter broadcast status {enable | disable} {enable | disable} Enable/disable disable OK Change the broadcast limiter status Example broadcast-limiter broadcast status enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer QOS003 broadcast-limiter broadcast threshold <value> <value> Threshold value in frames per second (0 - 1048576 in increments of 1024) <value> = 1024 OK Change the broadcast limiter threshold Example broadcast-limiter broadcast threshold 2048 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 47/54 ID Command Value range Default Answer QOS004 broadcast-limiter multicast status {enable | disable} {enable | disable} Enable/disable disable OK Change the multicast limiter status Example broadcast-limiter multicast status enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer QOS005 broadcast-limiter multicast threshold <value> <value> Threshold value in frames per second (0 - 1048576 in increments of 1024) <value> = 1024 OK Change the multicast limiter threshold Example broadcast-limiter multicast threshold 2048 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer QOS006 broadcast-limiter unicast status {enable | disable} {enable | disable} Enable/disable disable OK Change the unknown unicast limiter status Example broadcast-limiter unicast status enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.01 FLOS product family SCX 1.01 ID Command Value range Default Answer QOS007 broadcast-limiter unicast threshold <value> <value> Threshold value in frames per second (0 - 1048576 in increments of 1024) <value> = 1024 OK Change the broadcast limiter threshold Example broadcast-limiter unicast threshold 2048 Device range As of firmware version FLOS product range FL SWITCH 2000 1.02 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 48/54

21 Trap Manager commands

ID Command Value range Default Answer TMgr001 show snmp-trap OK + trap status list Tabular display of the SNMP trap states with the following columns: Trap Name Status Example show snmp-trap Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer TMgr002 snmp-trap status {enable | disable} {enable | disable} Enable/disable disable OK Change the global SNMP status Example snmp-trap status enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer TMgr003 snmp-trap server add <ip- address> <ip-address> IP address (xxx.xxx.xxx.xxx) OK snmp-trap server add 192.168.0.50 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 49/54 ID Command Value range Default Answer TMgr004 snmp-trap server remove <ip-address> <ip-address> IP address (xxx.xxx.xxx.xxx) OK Delete an SNMP trap server Example snmp-trap server remove 192.168.0.50 Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer TMgr005 snmp-trap trap <trap> {enable | disable} <trap> SNMP trap (selec- tion options: {mrp | ip-con- flict | fw-status-chg | port- sec-violation | link-up | link- down | rstp-top-chg | rstp- new-root | rstp-link-fail | pow-src-chg | fw-config | auth-fail | user-pwd-chg | sd- card-out | sd-card-in | con- fig-diff | warm-start | cold- start}) all enable OK Change the SNMP trap states Example snmp-trap trap link-up,auth-fail,warm-start enable Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01 ID Command Value range Default Answer TMgr006 snmp-trap send-test-trap OK Device range As of firmware version FLOS product range FL SWITCH 2000 1.00 FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 50/54

22 FLOS MTU commands

23 PoE commands

ID Command Value range Default Answer MTU001 show mtu all Display the MTU information for all ports Example show mtu all Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer MTU002 show mtu port <port-no> <port-no> Port number Display the MTU information for one port Example show mtu port 2 Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe001 show poe port all <cr> OK + PoE table Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe002 show poe port port-no <port- no> <cr> <port-no> Port number {1-5} OK + Port status list Device range As of firmware version FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 51/54 ID Command Value range Default Answer Poe003 show poe controller <cr> OK + PoE controller list Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe004 poe notification <value> <value> {enable | disable} OK Changing the global SNMP trap status for PoE Example poe notification enable Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe005 poe controller powerthresh- old <value> <cr> <value> {1-99} OK Setting the power threshold for SNMP trap Example poe controller powerthreshold 50 Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe006 poe port max-power <port- 8 OK Setting the maximum port performance class (PoE class) Example poe port max-power 2 5 Device range As of firmware version FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 52/54 ID Command Value range Default Answer Poe007 poe port prio <port-no> <value> <cr> {critical | high | low} high OK Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe008 poe port pairs <port-no> <value> <cr> {signal | spare | 4pairs} 4pairs OK Setting the wire pairs to which PoE is wired Example poe port pairs 3 4pairs Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe009 poe port power <port-no> <value> <cr> {enable | disable} enable OK Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Poe010 poe port operation-mode {auto | force} auto OK PoE is negotiated (Auto) or power output in accordance with set parameters “max-power” and “pairs” without negotiation (Force mode). Example poe port operation-mode 2 auto Device range As of firmware version FLOS product family SCX 1.01

SCX CLI... 109009_en_00 PHOENIX CONTACT 53/54

24 SCX I/O commands

ID Command Value range Default Answer Scx001 show scxio <cr> OK + I/O status list Device range As of firmware version FLOS product family SCX 1.01 ID Command Value range Default Answer Scx002 scxio out <value> <cr> <value> {enable | disable} disable OK Device range As of firmware version FLOS product family SCX 1.01

SCX CLI... 109009_en_00 54/54PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany phoenixcontact.com