SIG200-0A0512200 SICK

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 8

Technical content

SENSOR INTEGRATION GATEWAY

A B C D E F H I J K L M N O P Q R S T SIG200-0A0512200 | SIG200 SENSOR INTEGRATION GATEWAY

Ordering information

Type Part no. SIG200-0A0512200 1089796 Other models and accessories www.sick.com/SIG200 Detailed technical data

Features

Product category IO-Link Master Supported products IO-Link Devices Binary actuators Binary switching sensors Further functions Web server integrated USB connection for easy configuration of the SIG200 Sensor Integration Gateway with SOPAS ET, the engineering tool from SICK Logic editor is available for easy configuration of logic functions Items supplied SIG200-0A0512200, 4x blind plugs (M12) on port S2, S3, S4, P2, 1x blind plug (M8) on port CONFIG, Marking labels, quickstart Mechanics/electronics Connections IO-Link 4 x M12, 5-pin female connector, A-coded Power 1 x M12, 4-pin plug, A-coded CONFIG 1 x M8, 4-pin female connector, USB 2.0 (USB-A) Ethernet 2 x M12, 4-pin female connector, D-coded Power voltage supply Supply voltage 10 V DC ... 30 V DC 1) Current consumption ≤ 175 mA (At supply voltage 24 V DC) 2) ≤ 3,000 mA 3) Optical indicators 4 LED green (To the IO-Link ports, Pin4 (C/DI/DO)) 1) 10 - 30 V DC without IO-Link, 18 - 30 V DC with IO-Link. 2) Without sensors, outputs switched off. 3) The sum of all outputs, including the digital outputs, must not exceed the maximum current consumption of the device. The current consumption must be limited. 4) Pin 4 configured as digital output. The maximum output current does not depend on the voltage supply at pin 1 of S1-S4.

2 INTEGRATION PRODUCTS | SICK Product data sheet | 2023-11-29 10:20:54

Subject to change without notice

SIG200-0A0512200 | SIG200 SENSOR INTEGRATION GATEWAY

4 LED yellow (To the IO-Link ports, Pin2 (DI))

2 LED green (To the Ethernet ports)

1 LED green (For the Power Port)

1 LED dual-color (For module status communication)

1 LED green (For network status communication)

Input/output characteristics S1-S4 pin 1 voltage supply ≤ 500 mA S1-S4 pin 4 output current ≤ 200 mA 4) Power Port pin 4 output voltage HIGH VH ≥ VUS - 3 V S1-S4 pin 2 input voltage Type 3 IEC 61131-2 S1-S4 pin 4 input voltage Type 1 IEC 61131-2 Enclosure rating IP67 Protection class III Housing material Zinc Housing color Light blue/Black Weight 520 g Dimensions (L x W x H) 213.9 mm x 57 mm x 38.3 mm UL File No. E497722 1) 10 - 30 V DC without IO-Link, 18 - 30 V DC with IO-Link. 2) Without sensors, outputs switched off. 3) The sum of all outputs, including the digital outputs, must not exceed the maximum current consumption of the device. The current consumption must be limited. 4) Pin 4 configured as digital output. The maximum output current does not depend on the voltage supply at pin 1 of S1-S4. Interfaces Communication interface IO-Link, USB, Ethernet, EtherNet/IP™, REST API Logic editor ✔ Web server ✔ IO-Link Master Function The SIG200 Sensor Integration Gateway is an IO-Link master with 4 configurable ports to which IO-Link device as well as binary switching sensors and actuators can be connected. The gate- way data is made available to a PLC or cloud application via the REST API. SIG200 can also be operated as a standalone system by directly configuring simple logic func- tions across several connected devices via the SOPAS ET user interface. IO-Link version V1.1, V1.0 Port Class A Number of IO-Link ports 4 Transmission type COM1, COM2, COM3 Operator interfaces SOPAS ET, the engineering tool for configuration via USB, Additionally, the SIG200 can be con- figured via the integrated webserver. Default IP adress: 192.168.0.1 MAC address See product label Number of inputs Max. 8 x PNP, type 1 or 4 x IO-Link Number of outputs Max. 4 x PNP Max. Output frequency 50 Hz Inputs/outputs S1-S4 4 configurable ports Pin4 can be used in one of the available port modes: IO-Link, digital input or digital output. An additional digital input signal can be connected using Pin2. LINK/ACT 1 & 2 Two Ethernet ports are provided for the network connection 2023-11-29 10:20:54 | Product data sheet Subject to change without notice INTEGRATION PRODUCTS | SICK 3

A B C D E F H I J K L M N O P Q R S T SIG200-0A0512200 | SIG200 SENSOR INTEGRATION GATEWAY CONFIG Port for configuration via USB with SOPAS ET (SOPAS ET can be downloaded for free from www.sick.com) Initialization time after switch on 70s (plus additional time for IODD installation) Ambient data Ambient operating temperature –40 °C ... +55 °C 1) Ambient temperature, storage –40 °C ... +75 °C 1) Electromagnetic compatibility (EMC) EN 61000-6-2:2005-08 EN 61000-6-3:2007-01 Shock load EN 60068-2-6 1) Permissible relative air humidity: 0 % ... 90 % (non-condensing). Classifications eCl@ss 5.0 27242208 eCl@ss 5.1.4 27242608 eCl@ss 6.0 27242608 eCl@ss 6.2 27242608 eCl@ss 7.0 27242608 eCl@ss 8.0 27242608 eCl@ss 8.1 27242608 eCl@ss 9.0 27242608 eCl@ss 10.0 27242608 eCl@ss 11.0 27242608 eCl@ss 12.0 27242608 ETIM 5.0 EC001604 ETIM 6.0 EC001604 ETIM 7.0 EC001604 ETIM 8.0 EC001604 UNSPSC 16.0901 32151705

4 INTEGRATION PRODUCTS | SICK Product data sheet | 2023-11-29 10:20:54

Subject to change without notice

SIG200-0A0512200 | SIG200 SENSOR INTEGRATION GATEWAY Dimensional drawing (Dimensions in mm (inch)) POWER MS NS C/DI/DO DI C/DI/DO DI C/DI/DO DI C/DI/DO DI LINK ACT2 LINK ACT1 MS POWER NS /DO DI /DO DI /DO DI /DO DI LINK ACT2 LINK ACT1 SIG200 POWER CONFIG 9 (0.35) 38.3 (1.51) 30 (1.28) 57 (2.24) 36 (1.42) 28 (1.1) 198.5 (7.81) 213.9 (8.42) 1: L+ 2: DI 2 3: 0V 4: C/DI 1/DO 1 5: NC 1: TX+ 2: RX+ 3: TX– 4: RX– 5: NC IO-Link 87LL IND. CONT. EQ Type 1 Enc. 2 2 1 1: L+ 2: NC 3: 0V 4: NC 1: +VDC 2: –DATA 3: 0V 4: +DATA CONFIG POWER S1 - S4 P1 - P2 IO-Link SIG200-0A0512200 1089796 10-30 VDC OUT <100 mA Assembles in USA LN {YYWW}: EhterNET I/P 3 4 Connection diagram Cd-430 + (L+) not connected - (M) not connected 1 + (L+) 2 - Data 3 + Data 1 + (L+) 2 DI - (M)3

4 C/Q (IO-Link)/DI/DO

BK - (M)4 LINK ACT/1 + LINK ACT/2 4 3 1 2 1 + Tx 2 + Rx - Tx 3 4 - Rx WH/OG WH/GN OG GN 2023-11-29 10:20:54 | Product data sheet Subject to change without notice INTEGRATION PRODUCTS | SICK 5

A B C D E F H I J K L M N O P Q R S T SIG200-0A0512200 | SIG200 SENSOR INTEGRATION GATEWAY PIN assignment SIG200 POWER CONFIG 24 V DC/3 A (max. supply) 0 V 4 1

224 V DC/500 mA (sensor supply)

0 V24 V DC (DO)/200 mA

Other models and accessories www.sick.com/SIG200 Brief description Type Part no. Plug connectors and cables Head A: female connector, M12, 4-pin, straight, A-coded Head B: male connector, M12, 4-pin, straight, A-coded Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 1 m YF2A14- 010UB3M2A14 2095997 Head A: male connector, M12, 4-pin, straight, D-coded Head B: male connector, RJ45, 4-pin, straight Cable: Ethernet, PROFINET, PUR, halogen-free, shielded, 2 m YM2D24- 020PN1MRJA4 2106182

6 INTEGRATION PRODUCTS | SICK Product data sheet | 2023-11-29 10:20:54

Subject to change without notice

SIG200-0A0512200 | SIG200 SENSOR INTEGRATION GATEWAY Brief description Type Part no. Head A: male connector, M8, 4-pin, straight Head B: male connector, USB-A, 4-pin, straight Cable: USB 2.0, PVC, shielded, 1.5 m YM8U24- 015VG3MUSA 6051163 Sensor Integration Gateway

  • Further functions: USB connection for easy configuration of the SIG100 Sensor Inte- gration Gateway with SOPAS ET, the engineering tool from SICK, logic editor is avail- able for easy configuration of logic functions
  • I/O connection: 6 x M12, 5-pin female connector, A-coded
  • Connection CONFIG: 1 x M8, 4-pin female connector, USB 2.0 (USB-A)
  • Logic editor: yes
  • Communication interface: USB, IO-Link
  • Product category: IO-Link Hub SIG100-0A0111100 1089792 2023-11-29 10:20:54 | Product data sheet Subject to change without notice INTEGRATION PRODUCTS | SICK 7

SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com