104512

923190 ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 25

Technical content

1http://Connect.ERNI.com/contact/ Catalog E 074486 08/00 Edition 1 CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0 General Late in 1999 PCI Industrial Computer Manufacturers Group (PICMG) introduced the new revision 3.0 of the Compact- PCI Core Specification. Version 3.0 of this specification comprises a.o. hot swap and computer telephony specifi- cations such as pin sequencing. For CompactPCI, the metric ERmet connectors are specified in accordance with IEC 61076-4-101 which are available in build types A, B, AB, and as monoblock versions. This new version of the CompactPCI specification has the consequence a.o. that for 3 HE backplanes on position P2 a male connector, build type B with long connection pins for AB transfer and AB shrouds are inserted into position rP2. At the rear card end, on position rJ2, a sheilded female connector in build type AB is specified. For 6 HE backplanes, on P3 and P5, the male connector - build type B with long connection pins - for AB transfer and AB shrouds have to be inserted into positions rP3 and rP5. At the rear card end, on positions rJ3 and rJ5, a shielded female connector, build type AB, has been specified here. On P4, a blade contact strip, build type A with long connection pins for A shroud and A shroud frames, has been specified on position rP4. For the rear card end, a shielded female connector, build type A, has been defined on rJ4. For male connectors with shrouds in build types A and B, the specification only requires a series a grounding for the upper screening panel. All necessary connectors required in accordance with the new CompactPCI specification are available from ERNI. In addition, for CompactPCI applications, ERNI also offers an economic solution for a male connector with long terminal pins, which is populated with shield contacts on row a only. In addition to the new AB compatible male connectors for CompactPCI, ERNI also supplies shrouds. Here, all shrouds are available in four different heights (3.9 mm, 4.5 mm, 5.3 mm, and 6.1 mm) in order to adapt to the printed circuit board thickness of the backplanes.

2http://Connect.ERNI.com/contact/ Catalog E 074486 08/00 Edition 1 Ordering Informations CompactPCI Connectors acc. to PIGMG 2.0 Rev. 3.0 Part NumberLocation On The PCB Number Of Positions* Male Connectors For Backplanes Contact Loading* Part NumberLocation On The PCB Number Of Positions* Female Connectors For Daughter Cards Type A With Peg P1 25 CB---BC 923190 Type A With Peg And Extended Terminals For Shrouding P1 Special 25 TP---PT 923197 Type A Without Peg And With Extended Terminals P1 25 TS---ST 923342 Type B (AB Compatible) With Extended Terminals For Shrouding P2, P5 22 TSSSSS- 923345 Type B (AB Compatible) With Extended Terminals For Shrouding P3 19 TSSSSST 923341 Type B (AB Compatible) With Extended Terminals For Shrouding P3 19 TSSSSS- 923346 Type A With Extended Terminals For Shrouding P4 25 S----ST 923347 Type A With Peg And Extended Terminals For Shrouding P4 25 TRRRRRT 064688 Type A With Peg And Extended Terminals For Shrouding P4 25 TSSSSST 103975 Type B (AB Compatible) With Extended Terminals Type B (AB Compatible) With Extended Terminals For Shrouding P2, P5 22 TSSSSST 923340Type A With Shield, Without Peg J1, J4 25 064176 Type A With Split Shield, Partially Loaded J4 Telecom 25 104512 Type A With Split Shield, Partially Loaded rJ4 Telecom 25 104697 Type AB With Shield, Without Peg rJ2, rJ5 22 114809 Type AB With Shield, Without Peg rJ3 19 114810 Type B With Upper Shield J2, J5 22 064785 Type B With Upper Shield J3 19 064784 Part NumberLocation On The PCB Number Of Positions* Shrouds For Male Connectors Height (mm) Type A Shroud 25 Positions rP1, rP4 25 14.35 114436 Type A Shroud 25 Positions rP1, rP4 25 14.95 054795 Type A Shroud 25 Positions rP1, rP4 25 15.75 054794 Type A Shroud 25 Positions rP1, rP4 25 16.55 054793 Type AB Shroud 22 Positions rP2, rP5 22 14.95 114426 Type AB Shroud 22 Positions rP2, rP5 22 15.75 114427 Type AB Shroud 22 Positions rP2, rP5 22 16.55 114428 Type AB Shroud 19 Positions rP3 19 14.35 114487 Type AB Shroud 19 Positions rP3 19 14.95 114488 Type AB Shroud 19 Positions rP3 19 15.75 114489 Type AB Shroud 19 Positions rP3 19 16.55 114490 Part NumberApplication Code Number Coding Keys Color Coding Keys For Male Connectors And Shrouds 5.0 Volts P1 1567 Brilliant Blue 043347 Coding Keys For Male Connectors And Shrouds 3.3 Volts P1 3456 Cadmium Yellow 043345 Coding Keys For Male Connectors And Shrouds Telecom P4 1248 Strawberry Red 043350 Coding Keys For Female Connectors 5.0 Volts J1 2348 Brilliant Blue 043337 Coding Keys For Female Connectors 3.3 Volts P1 1278 Cadmium Yellow 043335 Coding Keys For Female Connectors Telecom J4 3567 Strawberry Red 043340 * Length = 50mm; Pitch = 2.0mm => 50 / 2 = 25 Positions **Cross Sectional Loading From Z To F

20.6+ - 0.05 5 * 2 =( 10) 1.5 a b c d e f 111131525 0.1 alle Loecher durchkontaktiert, Bohrloch 0.7± 0.02 Lochbild fuer Leiterplatte ( Bestueckungsseite ) Board hole pattern ( Component mounting side ) plated thru, drill hole 0.7± 0.02 all holes 10 * 2 =20 8 10 * 2 =20 4 * 2 = 8 a b c d e 1111525 50 max. Anforderungsstufe Id.-Nr. Datum class date Abschirmblech 044445 - shielding 11.4 12.25 3- 0.4 1.7+ - 0.05 10.8- 0.2 EE - Zone fuer durchkontaktierte Loecher [ 0.6± 0.05 Compliant zone for thru hole [ 0.6± 0.05 Fehlende Masse und Angaben nach IEC 61076 - 4 - 101 Missing information and dimensions per IEC 61076 - 4 - 10 XXXXX XXXXXXXXInformation : Abschirmblech oben montiert shielding mounted on top ERmet Federleiste A ERmet Female Type A 2:1 064176 ohne Fixierstift- without locating pegs a b c d e 1111525 Bestueckungsplan -contact layout = bestueckt- assemble

10 x 2 = 20 8 10 x 2 = 20 4 x 2 = 8 a b c d e 1111525 58 21.9 + - 0.1 9.5 + - 0.1 50 max. 0.5 + 0.2 Anforderungsstufe class Id.-Nr. Datum date Abschirmblech 104514 - shielding Abschirmblech 104515 - shielding 11.4 12.25 3 - 0.4 1.7 + - 0.05 10.8 - 0.2 EE - Zone fuer durchkontaktierte Loecher Ø 0.6 ± 0.05 Compliant zone for thru hole Ø 0.6 ± 0.05 20.6 + - 0.05 10 x 2 = ( 20 ) 10 x 2 = ( 20 ) 5 x 2 = ( 10 ) 1.5 a b c d e f 111131525 0.1 alle Loecher durchkontaktiert, Bohrloch 0.7 ± 0.02 Lochbild fuer Leiterplatte ( Bestueckungsseite ) Board hole pattern ( Component mounting side ) plated thru, drill hole 0.7 ± 0.02 all holes Fehlende Masse und Angaben nach IEC 61076 - 4 - 101 Missing information and dimensions per IEC 61076 - 4 - 10 XXXXX XXXXXXXX Information : Abschirmblech oben montiert shielding mounted on top ohne Fixierstift - without locating pegs ERmet Federleiste A ERmet Female Type A 2:1 104512 a b c d e 1111525 Bestueckungsplan - contact layout = bestueckt - assemble

21 x 2 = 5 x 2 = a b c d e 4 x 2 = 8 2 21 x 2 = 42 a b c d e Bestückungsplan - = bestückt - assemble contact layout 44max. XXXXERNI 1148092 Anforderungsstufe Id.-Nr. Datum dateclass EE-Zone für durchkontaktierte Löcher [ 0.6 60.05 Compliant zone for thru hole [ 0.6 60.05 11.4 3-0.4 1.760.05 10.8-0.2 13.85 a b c d 0.1 alle Löcher durchkontaktiert, Bohrloch 0.7 Lochbild für Leiterplatte (Bestückungsseite) all holes plated thru, drill hole 0.7 Board hole pattern (Component mounting side) 20.6 + - 0.05 (10) 1.5 (42) e f Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 Information : Abschirmblech oben shielding mounted on top Elektroapparate D-73099 Scal Designation Toleranc 114809 ERmet Federleiste AB 22 ERmet Female Type AB 22 2:1 I All rights Only for To insure that this is the version of this drawing, contact one of the ERNI before Subject to modification prior Drawing will not be

5 x 2 = 3618 x 2 = a b c d e Bestückungsplan - = bestückt - assemble contact layout 119 a b c d e 3618 x 2 = 119 84 x 2 = All Dimensions in mm Elektroapparate GmbH D-73099 ADELBERG Scale Designation Tolerances Consider protection memo from DIN 34 114810 ERmet Federleiste AB 19 ERmet Female Type AB 19 2:1 I All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Fehlende Masse und Angaben nach IEC 61076-4-101 Missing information and dimensions per IEC 61076-4-101 Information: Abschirmblech oben montiert shielding mounted on top a b c d 0.1 alle Löcher durchkontaktiert, Bohrloch 0.760.02 Lochbild für Leiterplatte (Bestückungsseite) all holes plated thru, drill hole 0.7 60.02 Board hole pattern (Component mounting side) 20.6+ - 0.05 ( 10) 1.5 ( ) e f 38 max. XXXX2 ERNI114810 Anforderungsstufe class Id.-Nr. Datum date 3-0,4 1,7 0,05 10,8 -0,2 11,4 13,85 EE-Zone für durchkontaktierte Loecher [ 0.660.05 Compliant zone for thru hole [ 0.660.05

44 max. Anforderungsstufe Id.-Nr. Datum class date Abschirmblech 914795 - shielding 4 * 2 = 8 21 * 2 =42 a b c d e 122 11.4 3- 0.4 1.7+ - 0.05 10.8- 0.2 11.8 EE - Zone fuer durchkontaktierte Loecher [ 0.6± 0.05 Compliant zone for thru hole [ 0.6± 0.05 20.6+ - 0.05 5 * 2 =( 10) 1.5 21 * 2 =( 42) a b c d e f 0.1 alle Loecher durchkontaktiert, Bohrloch 0.7± 0.02 Lochbild fuer Leiterplatte ( Bestueckungsseite ) all holes plated thru, drill hole 0.7± 0.02 Board hole pattern ( Component mounting side ) a b c d e Bestueckungsplan - = bestueckt- assemble contact layout Fehlende Masse und Angaben nach IEC 61076 - 4 - 101 Missing information and dimensions per IEC 61076 - 4 - 10 XXXXX XXXXXXXXInformation : Abschirmblech oben montiert shielding mounted on top ERmet Federleiste B 22 ERmet Female Type B 22 2:1 064785

4 * 2 = 8 18 * 2 =36 a b c d e 119 11.4 3- 0.4 1.7+ - 0.05 10.8- 0.2 11.8 EE - Zone fuer durchkontaktierte Loecher [ 0.6± 0.05 Compliant zone for thru hole [ ± 0.05 38 max. AnforderungsstufeId.-Nr. Datum class date Abschirmblech 064781 - shielding 20.6+ - 0.05 5 * 2 =( 10) 1.5 18 * 2 =( 36) a b c d e f 0.1 alle Loecher durchkontaktiert, Bohrloch 0.7± 0.02 Lochbild fuer Leiterplatte ( Bestueckungsseite ) all holes plated thru, drill hole 0.7± 0.02 Board hole pattern ( Component mounting side ) a b c d e Bestueckungsplan - = bestueckt- assemble contact layout Fehlende Masse und Angaben nach IEC 61076 - 4 - 101 Missing information and dimensions per IEC 61076 - 4 - 10 XXXXX XXXXXXXXInformation : ERmet Federleiste B 19 ERmet Female Type B 19 2:1 064784 Abschirmblech oben montiert shielding mounted on top

16.55 114436 49,9 126 x 2 = 2 2 8 20 10 x 2 =20 10 x 2 = 14,8 H 3,9 14,35 11,6 IndexName Tool-Nr.: Scale Material Designation Class DateName Tolerances Consider protection memo from DIN 34Modification Nr.Date Dimension Nr. 054792 ERmet A Übergaber. m. Klemmst ERmet A Shroud with clamp part siehe Einzelteile see pieceparts 5:1 D O:00010255.SZN Ident-Nr.Mass H 15.75 14.95 14.35 054795 054794 054793 dimension H I.D. number All Dimensions in mm Elektroapparate GmbH D-73099 ADELBERG All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated.

16.55 15.75 14.95 14.35 Ident-Nr.Maß H I.D.numberdimensions H 15,4 126 x 2 = 14,8 42 21 x 2 = 43,9 3,9 14,35 H 11,6 IndexName Tool-Nr.: Scale Material Designation Class DateName Tolerances Consider protection memo from DIN 34Modification Nr.Date Dimension Nr. 114429 ERmet AB 22 Überga. m. KLemmst. ERmet AB 22 Shroud with clamp siehe Einzelteile see pieceparts 5:1 D O:00010299.SZN All Dimensions in mm Elektroapparate GmbH D-73099 ADELBERG All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated.

16.55 15.75 14.95 14.35 Ident-Nr.Maß H I.D.numberdimensions H 3,9 14,35 H 11,6 36 18 x 2 = 37,9 15,4 14,8 126 x 2 = IndexName Tool-Nr.: Scale Material Designation Class DateName Tolerances Consider protection memo from DIN 34Modification Nr.Date Dimension Nr. 114486 ERmet AB 19 Überg. m. Klemmst. ERmet AB 19 Shroud with clamp. siehe Einzelteile see pieceparts 5:1 D O:00010296.SZN All Dimensions in mm Elektroapparate GmbH D-73099 ADELBERG All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated.

http://Connect.ERNI.com/contact/ Catalog E 074482 02/00 Edition 1 Coding keys for male connectors and shrouds Coding keys for female connectors Coding Keys Part Number Code No. ColourCoding Key 3568 043342 Pastel Orange RAL 2003 Fincke 00233197 1247 043332 Pastel Orange RAL 2003 Fincke 00233197 3478 043343 Steel Blue RAL 5011 Fincke 00251197 1256 043333 Steel Blue RAL 5011 Fincke 00251197 3467 043344 Slate Grey RAL 7015 Fincke 00235197 1258 043334 Slate Grey RAL 7015 Fincke 00235197 3456 043345 Cadmium Yellow RAL 1021 Fincke 00252197 1278 043335 Cadmium Yellow RAL 1021 Fincke 00252197 2578 043346 Reseda Green RAL 6011 Fincke 00237197 1346 043336 Reseda Green RAL 6011 Fincke 00237197 1567 043347 Brilliant Blue RAL 5007 Fincke 00245197 2348 043337 Brilliant Blue RAL 5007 Fincke 00245197 1356 043348 Blue/Lilac RAL 4005 Fincke 00246197 2478 043338 Blue/Lilac RAL 4005 Fincke 00246197 4678 043349 Ocher Yellow RAL 1024 Fincke 00313197 1235 043339 Ocher Yellow RAL 1024 Fincke 00313197 1248 043350 Strawberry Red RAL 3018 Fincke 00312197 3567 043340 Strawberry Red RAL 3018 Fincke 00312197 1236 043351 Nut Brown RAL 8011 Fincke 00272197 4578 043341 Nut Brown RAL 8011 Fincke 00272197 053593Mounting Device For Coding-Keys

Ordering Information

No. ColourCoding Key

min. 0.1 ø 0.6 + - 0.05 ø 0.7 + - 0.02 Restringbreite Restring width Durchmesser des metallisierten Loches Diameter of finished plated-through hole Bohrungsdurchmesser des Loches Diameter of drilled hole max. 15 µm Sn / SnPbmin. 25 µm Cu Schichtaufbau im metallisierten Loch fuer EE-Kontakt Metal plating of plated-through hole for EE-contact fuer Einpresszone D = 0.72 for press-fit zone D = 0.72 Lochaufbau D=0.6 Hole design D=0.6 10:1 114406