103H7121-0140 ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 1

Technical content

56 mm sq. (2.20 inch sq.) 1.8˃/stepɹ RoHS Unipolar winding, Lead wire type Bipolar winding, Lead wire type ⾣p. 70 Unipolar winding, Lead wire type Model number Holding torque at 2-phase energization Rated current Wiring resistance Winding inductance Rotor inertia Mass (Weight) Motor length (L) Single shaft Dual shaft [N·m (oz·in) min.] A/phase Ω/phase mH/phase [ʷ10-4kg·m2 (oz·in2)] [kg (Ibs)] mm (in) ■Characteristics diagram 103H7121-0440 103H7121-0410 103H7121-0140 103H7121-0110 103H7121-0740 103H7121-0710 103H7123-0140 103H7123-0110 Allowable Load, Rotation Direction ⾣p. 87ɹGeneral Speci/f_ications⾣p. 88 Data is measured under the trial conditions of SANYO DENKI. Driving torque may vary according to actual machine precision. 103H7123-0740 103H7123-0710 103H7123-0440 103H7123-0410 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number and quantity. Contact us for details. Constant current circuit Source voltage: 24 VDC Operating current:

1 A/phase, 2-phase

energization (full-step) J oz·in2) use the rubber coupling] fs: Maximum self-start frequency when not loaded Constant current circuit Source voltage: 24 VDC Operating current:

2 A/phase, 2-phase

energization (full-step) J oz·in2) use the rubber coupling] fs: Maximum self-start frequency when not loaded Constant current circuit Source voltage: 24 VDC Operating current:

3 A/phase, 2-phase

energization (full-step) J oz·in2) use the rubber coupling] fs: Maximum self-start frequency when not loaded Constant current circuit Source voltage: 24 VDC Operating current: energization (full-step) J oz·in2) use the rubber coupling] fs: Maximum self-start frequency when not loaded Constant current circuit Source voltage: 24 VDC Operating current: energization (full-step) J oz·in2) use the rubber coupling] fs: Maximum self-start frequency when not loaded Constant current circuit Source voltage: 24 VDC Operating current: energization (full-step) J oz·in2) use the rubber coupling] fs: Maximum self-start frequency when not loaded Torque (N·m) Pulse rate (kpulse/s) Number of rotations (minʵ1) 0.1 11 0 100 1000 2000 30005000100 fs 0.1 0.2 0.3 0.4 0.5 Torque (oz·in) Pull-out torque at JL Torque (N·m) Pulse rate (kpulse/s) Number of rotations (minʵ1) 0.1 11 0 100 1000 2000 30005000100 fs 0.1 0.2 0.3 0.4 0.5 Torque (oz·in) Pull-out torque at JL Torque (N·m) Pulse rate (kpulse/s) Number of rotations (minʵ1) 0.1 11 0 100 1000 2000 30005000100 fs 0.1 0.2 0.3 0.4 0.5 Torque (oz·in) Pull-out torque at JL Torque (N·m) Pulse rate (kpulse/s) Number of rotations (minʵ1) 0.1 11 0 100 1000 2000 30005000100 fs 0.2 0.4 0.6 0.8 1.0 Torque (oz·in) 140 120 100 Pull-out torque at JL Torque (N·m) Pulse rate (kpulse/s) Number of rotations (minʵ1) 0.1 11 0 100 10002000 3000 5000100 fs 0.2 0.4 0.6 0.8 1.0 Torque (oz·in) 140 120 100 Pull-out torque at JL Torque (N·m) Pulse rate (kpulse/s) Number of rotations (minʵ1) 0.1 11 0 100 1000 20003000 5000100 fs 0.2 0.4 0.6 0.8 1.0 Torque (oz·in) 140 120 100 Pull-out torque at JL Stepping Motors