10D YAGEO

Document overview

  • PDF pages: 17

Technical content

Page 1

PDF page 1 diagram

DATA SHEET

POWER SUPPLY 10D series

RoHS compliant & Halogen free

Page 2

PDF page 2 diagram

Metal Oxide Varistors (MOV) Data Sheet

Features

PDF page 2 diagram

■ Wide operating voltage (V1mA) range from 18V to 1100V ■ Fast responding to transient over-voltage ■ Large absorbing transient energy capability ■ Low clamping ratio and no follow-on current ■ Meets MSL level 1, per J-STD-020 ■ Operating Temperature:-40℃ ~ +105℃ ■ Storage Temperature:-40℃ ~ +125℃ ■ Safety certification:UL、CSA、VDE

Applications

■ Transistor, diode, IC, thyristor or triac semiconductor protection ■ Surge protection in consumer electronics ■ Surge protection in industrial electronics ■ Surge protection in electronic home appliances, gas and petroleum appliances ■ Relay and electromagnetic valve surge absorption

Part Number Code

4 7 1

K D 1 0

J O

PDF page 2 diagram

Type

Surge Series

D: Disk

No suffix: Standard type J: High Surge type

Varistor Voltage 180: 18V 101: 100V

Element Diameter

102: 1000V

10

TR Packing No suffix: Bulk TB: Tape & Box & P0=12.7mm TR: Tape & Reel & P0=12.7mm EB: Tape & Box & P0=15.0mm ER: Tape & Reel & P0=15.0mm Lead Shape No suffix: Straight leads O: Outside crimped leads F: Y Kinked leads

Page 3

PDF page 3 diagram

Dimensions

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

T

T

PDF page 3 diagram

O Type

Table 2 Unit: mm
Model T e Model T e
180K 2.0~4.6 1.5 301K 2.7~5.5 2.5
220K 2.1~4.7 1.6 331K 2.7~5.8 2.5
270K 2.1~4.8 1.8 361K 2.9~6.0 2.7
330K 2.2~5.0 1.7 391K 3.0~6.2 2.8
390K 2.1~5.3 1.8 431K 3.2~6.5 3.0
470K 2.2~5.4 1.9 471K 3.3~6.7 3.2
560K 2.3~5.5 2.1 511K 3.4~6.8 3.4
680K 2.4~5.6 2.4 561K 3.6~7.0 3.6
820K 2.1~4.7 1.8 621K 3.8~7.3 3.9
101K 2.4~4.9 2.0 681K 4.0~7.6 4.2
121K 2.4~5.1 2.2 751K 4.3~8.0 4.3
151K 2.2~5.4 1.8 781K 4.4~8.1 4.4
181K 2.3~4.8 1.9 821K 4.6~8.3 4.6
201K 2.4~5.0 2.0 911K 4.8~8.8 5.0
221K 2.5~5.1 2.1 102K 5.4~9.3 5.0
241K 2.6~5.2 2.2 112K 5.8~9.9 5.4
271K 2.6~5.4 2.4
Table 1 Unit: mm
Symbol Dimension
H 10.5~16.0
H1 13.0~17.5
L(min.) 20.0
L1(min.) 15.0
D 10.0~12.5
F(±0.8) 7.5
T Table 2
e(±0.8) Table 2
d(±0.05) 0.8
d1(±0.4) 1.4

Page 4

PDF page 4 diagram

Electrical Characteristics

Part Number Maximum Allowable Voltage Varistor Voltage Maximum Clamping Voltage Withstanding Surge Current Maximum Energy (10/1000μs) Rated Power Typical Capacitance (Reference)
Standard High Surge V (V) AC V (V) DC V (V) 1mA I (A) P V (V) C I (A) Standard I (A) High Surge (J) Standard (J) High Surge (W) @1KHz (pf)
180KD10 180KD10J 11 14 18(15~21.6) 5 36 500 1000 2.1 3.0 0.05 5600
220KD10 220KD10J 14 18 22(19.5~26) 5 43 500 1000 2.5 5.0 0.05 4500
270KD10 270KD10J 17 22 27(25~31) 5 53 500 1000 3.0 6.0 0.05 3700
330KD10 330KD10J 20 26 33(29.5~36.5) 5 65 500 1000 4.0 7.0 0.05 3000
390KD10 390KD10J 25 31 39(35~43) 5 77 500 1000 4.6 9.0 0.05 2400
470KD10 470KD10J 30 38 47(42~52) 5 93 500 1000 5.5 11.0 0.05 2100
560KD10 560KD10J 35 45 56(50~62) 5 110 500 1000 7.0 13.0 0.05 1800
680KD10 680KD10J 40 56 68(61~75) 5 135 500 1000 8.2 15.0 0.05 1500
820KD10 820KD10J 50 65 82(74~90) 25 135 2500 3500 12.0 17.0 0.4 1200
101KD10 101KD10J 60 85 100(90~110) 25 165 2500 3500 15.0 18.0 0.4 1000
121KD10 121KD10J 75 100 120(108~132) 25 200 2500 3500 18.0 21.0 0.4 830
151KD10 151KD10J 95 125 150(135~165) 25 250 2500 3500 22.0 25.0 0.4 670
181KD10 181KD10J 115 150 180(162~198) 25 300 2500 3500 27.0 30.0 0.4 560
201KD10 201KD10J 130 170 200(180~220) 25 340 2500 3500 30.0 35.0 0.4 500
221KD10 221KD10J 140 180 220(198~242) 25 360 2500 3500 32.0 39.0 0.4 450
241KD10 241KD10J 150 200 240(216~264) 25 395 2500 3500 35.0 42.0 0.4 420
271KD10 271KD10J 175 225 270(243~297) 25 455 2500 3500 37.0 49.0 0.4 370
301KD10 301KD10J 190 250 300(270~330) 25 500 2500 3500 40.0 54.0 0.4 330
331KD10 331KD10J 210 275 330(297~363) 25 550 2500 3500 43.0 58.0 0.4 300
361KD10 361KD10J 230 300 360(324~396) 25 595 2500 3500 47.0 65.0 0.4 280
391KD10 391KD10J 250 320 390(351~429) 25 650 2500 3500 60.0 70.0 0.4 260
431KD10 431KD10J 275 350 430(387~473) 25 710 2500 3500 65.0 80.0 0.4 230
471KD10 471KD10J 300 385 470(423~517) 25 775 2500 3500 67.0 85.0 0.4 210
511KD10 511KD10J 320 415 510(459~561) 25 845 2500 3500 69.0 90.0 0.4 200
561KD10 561KD10J 350 460 560(504~616) 25 925 2500 3500 70.0 92.0 0.4 180
621KD10 621KD10J 385 505 620(558~682) 25 1025 2500 3500 72.0 95.0 0.4 160
681KD10 681KD10J 420 560 680(612~748) 25 1120 2500 3500 75.0 98.0 0.4 150
751KD10 751KD10J 460 615 750(675~825) 25 1240 2500 3500 77.0 100.0 0.4 130
781KD10 781KD10J 485 640 780(702~858) 25 1290 2500 3500 80.0 105.0 0.4 125
821KD10 821KD10J 510 670 820(738~902) 25 1355 2500 3500 85.0 110.0 0.4 120
911KD10 911KD10J 550 745 910(819~1001) 25 1500 2500 3500 93.0 130.0 0.4 110
102KD10 102KD10J 625 825 1000(900~1100) 25 1650 2500 3500 102.0 140.0 0.4 100
112KD10 112KD10J 680 895 1100(990~1210) 25 1815 2500 3500 115.0 155.0 0.4 90

Notes: 1. The tolerance of varistor voltage between 18V and 27V is more than 10%. 2. Leakage Current (@83% of V1mA):IR≤50μA (180K~680K) IR≤25μA (820K~112K)

Page 5

PDF page 5 diagram

5

Maximum Surge Current Derating Curve

180KD10 to 680KD10 10000 1000 1 (A) 2 10 Current 100 102 103 104 105 Surge 106 10 Max. 1 0.1 10 100 1000 10000 Td (μs) 820KD10 to 112KD10 10000 1 2 1000 10 (A) 102 103 Current 100 104 105 106 Surge 10 Max. 1 0.1 10 100 1000 10000 Td (μs)
180KD10J to 680KD10J 10000 1000 1 2 (A) 10 Current 102 100 103 104 105 Surge 106 10 Max. 1 0.1 10 100 1000 10000 Td (μs) 820KD10J to 112KD10J 10000 1 2 1000 10 102 (A) 103 104 Current 100 105 106 Surge 10 Max. 1 0.1 10 100 1000 10000 Td (μs)

Page 6

PDF page 6 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 6 diagram

Page 7

PDF page 7 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 7 diagram

Page 8

PDF page 8 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 8 diagram

Page 9

PDF page 9 diagram

Maximum Leakage Current and Maximum Clamping Voltage Curve

PDF page 9 diagram

Page 10

PDF page 10 diagram

Reliability

Items Standard Test conditions / Methods Specifications
Tensile Strength of Terminals IEC60068-2-21 Gradually applying the force specified and keeping the unit fixed for 10±1 sec. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 1.0 0.8<d≤1.25 2.0 1.25<d 4.0 No visible damage |ΔV 1mA/V1mA |≤5%
Bending Strength of Terminals IEC60068-2-21 Hold specimen and apply the force specified below to each lead. Bend the specimen to 90°, then return to the original position. Repeat the procedure in the opposite direction. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 0.5 0.8<d≤1.25 1.0 1.25<d 2.0 No visible damage |ΔV 1mA/V1mA |≤5%
Vibration IEC60068-2-6 Frequency range: 10~55 Hz Amplitude: 0.75mm or 98m/s2 Direction: 3 mutually perpendicular directions, 2hrs each. No visible damage |ΔV 1mA/V1mA |≤5%
Solderability IEC60068-2-20 Solder Temp: 245±5℃ Dipping Time: 2±0.5 sec At least 95% of terminal electrode is covered by new solder
Resistance to Soldering Heat IEC60068-2-20 Solder Temp: 260±5℃ Dipping Time: 10±1 sec No visible damage |ΔV 1mA/V1mA |≤5%
High Temperature Storage IEC60068-2-2 Ambient Temp: 125±2℃ Duration: 1000±24hrs No visible damage |ΔV 1mA/V1mA |≤5%
Low Temperature Storage IEC60068-2-1 Ambient Temp: -40±2℃ Duration: 1000±24hrs No visible damage |ΔV 1mA/V1mA |≤5%
Damp Heat, Steady State IEC60068-2-78 The test is divided into two groups . a. 40±2℃ , 90~95% RH for 1344±24hrs b. 40±2℃ , 90~95% RH,at 10%VDC ,1344±24 hrs No visible damage |ΔV 1mA/V1mA|≤10% Insulation Resistance≧100MΩ
High Temperature Load MIL-STD-202 Method 108 Ambient Temp: 105±2℃ Duration: 1000±24hrs Load: Max. Allowable Voltage In AC. |ΔV 1mA/V1mA|≤10%
Temperature Cycle IEC60068-2-14 The conditions shown below shall be repeated 5 cycles Step Temperature (℃) Period (minutes) 1 -40±3 30±3 2 Room temperature 5±3 3 125±3 30±3 4 Room temperature 5±3 No visible damage |ΔV 1mA/V1mA |≤5%
8/20uS Surge Life IEC61051-1 8/20µS waveform,10 surge currents, unipolar, interval 30secs,amplitude corresponding to max. surge current derating curves for 20µS. No visible damage △Vb(1mA)≦±10%
10/1000µS Surge Life IEC61051-1 10/1000µS waveform,10 surge currents, unipolar, interval 2mins,amplitude corresponding to max. surge current derating curves for 1000µS. No visible damage |ΔV 1mA/V1mA |≤10%
Voltage Proof IEC61051-1 Metal balls method, 2500Vac 1 min. No visible damage
Step Temperature (℃) Period (minutes)
1 -40±3 30±3
2 Room temperature 5±3
3 125±3 30±3
4 Room temperature 5±3

Page 11

PDF page 11 diagram

Soldering Recommendation

PDF page 11 diagram
PDF page 11 diagram
PDF page 11 diagram
Item Conditions
Peak Temperature 265℃
Dipping Time 10 seconds (max.)
Soldering 1 time

Recommendation Reworking Conditions with Soldering Iron

PDF page 11 diagram
PDF page 11 diagram
Item Conditions
Temperature of Soldering Iron-tip 360℃ (max.)
Soldering Time 3 seconds (max.)
Distance from Varistor 2mm (min.)

Marking Code

PDF page 11 diagram

Page 12

PDF page 12 diagram

Taping Dimensions

P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 25.4±1.0
P0 12.7±1.0
P1 8.95±0.7
P2 12.7±1.3
F 7.5±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 36max
P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 15.0±1.0
P0 15.0±1.0
P1 3.85±0.7
P2 7.5±1.3
F 7.5±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 36max

Page 13

PDF page 13 diagram

Taping Dimensions

P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 25.4±1.0
P0 12.7±1.0
P1 8.95±0.7
P2 12.7±1.3
F 7.5±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 36max
P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 15.0±1.0
P0 15.0±1.0
P1 3.85±0.7
P2 7.5±1.3
F 7.5±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H0 16.0±1.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 36max

Page 14

PDF page 14 diagram

Taping Dimensions

P2 P h B W2 H2 W0 W D0 I P1 F W1 P0 t Symbol Dimension (mm)
P 25.4±1.0
P0 12.7±1.0
P1 8.95±0.7
P2 12.7±1.3
F 7.5±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H2 20.0±2.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 36max
P2 P h B W2 H2 W0 W D0 I P1 F P0 W1 t Symbol Dimension (mm)
P 15.0±1.0
P0 15.0±1.0
P1 3.85±0.7
P2 7.5±1.3
F 7.5±0.8
h 0±2
W 18.0±1.0
W0 12.0±1.0
W1 9.0±0.5
W2 3.0max
H2 20.0±2.0
I 2.0max
D0 4.0±0.2
t 0.6±0.3
B 36max

Page 15

PDF page 15 diagram

Quantity

Packaging Dimensions (Unit: mm) Quantity
In bulk for Terminals Untrimmed Products Max. 130 Max. 165 250 Max. 500pcs/bag 4bags/box (180K~621K)
400pcs/bag 4bags/box (681K~112K)
300pcs/bag 4bags/box (122K~182K)
In bulk for Terminals Trimmed Products ax. M 66 Max. 165 252 Max. 500pcs/bag 4bags/box (180K~621K)
400pcs/bag 4bags/box (681K~112K)
300pcs/bag 4bags/box (122K~182K)
Packaging Dimensions (Unit: mm) Quantity
Tape & Box & P0=12.7mm ax. M 60 Max. 250 340 Max. 750pcs/box (180K~241K)
600pcs/box (271K~391K)
500pcs/box (431K~621K)
300pcs/box (681K~112K)
Tape & Reel & P0=12.7mm ax. M 60 Max. 365 365 Max. 55 Max. 30±1 Φ365 Max. 1000pcs/reel (180K~391K)
750pcs/reel (431K~621K)
500pcs/reel (681K~112K)

Page 16

PDF page 16 diagram

Quantity

Packaging Dimensions (Unit: mm) Quantity
Tape & Box & P0=15.0mm ax. M 60 Max. 250 340 Max. 1000pcs/box (180K~391K)
750pcs/box (431K~621K)
600pcs/box (681K~751K)
500pcs/box (781K~112K)
Tape & Reel & P0=15.0mm ax. M 60 Max. 365 365 Max. 55 Max. 30±1 Φ365 Max. 1000pcs/reel (180K~391K)
750pcs/reel (431K~751K)
500pcs/reel (781K~112K)

Page 17

PDF page 17 diagram

Legal Disclaimer

YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice.

YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability.

YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy-related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data-processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety

equipment, Traffic signal equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.

Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.