DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. High Frequency, High Current Power Inductors Document 893 -1 Document 893-1 Revised 10/05/17 Inductance2 Q test DCR Irms (A)5 ±20% Q3 freq SRF typ4 (mOhm) 20°C 40°C Weight Part number1 (nH) typ (MHz) (MHz) typ max rise rise (g) 1. When ordering, please specify packaging code: 2014VS-251MEC Packaging: C = 7″ machine-ready reel (Standard for 1010VS.) EIA-481 embossed plastic tape. D = 13″ machine-ready reel (Standard for 1212VS and 2014VS; optional, factory order only, not stocked for 1010VS.) EIA-481 embossed plastic tape. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C for 1010VS; D for 1212VS and 2014VS instead.

  • Excellent Q factors – up to 230 at 400 MHz!
  • Current handling as high as 57 Amps
  • Inductance values from 22 to 257 nH Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper Ambient temperature –40°C to +125°C with Irms current Maximum part temperature +155°C (ambient + temp rise). Storage temperature Component: –40°C to +155°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 1 billion hours PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 2. Inductance measured at 1.0 MHz, 0.1 Vrms, 0 A using an Agilent/HP HP4291A impedance analyzer with an Agilent/HP 16193A test fixture or equivalents. 3. Q measured at the specified frequency using an Agilent/HP 4291A impedance analyzer or equivalent. 4. SRF measured using an Agilent/HP 8753 network analyzer or equivalent and a Coilcraft CCF1199 test fixture 5. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Sample & buy Support & FAQ Web page Tools & software

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. High Frequency, High Current Power Inductors – 1010VS, 1212VS, 2014VS Document 893-2 Document 893-2 Revised 10/05/17 L vs Frequency Q vs Frequency 146 nH 111 nH 79 nH 46.5 nH 23.5 nH 100 125 150 175 200 225 300 250 Q F actor 11 0 1000100 Frequency (MHz) 561RAU 22 nH 42 nH 66 nH 90 nH 117 nH 615RAU 100 125 150 175 200 225 300 250 Q F actor 11 0 1000100 Frequency (MHz) 202 nH 155 nH 108 nH 66 nH 33 nH 100 125 150 175 200 225 300 250 Q F actor 11 0 1000100 Frequency (MHz) 643RAU 257 nH 100 1000 Inductance (nH) 11 0 1000100 Frequency (MHz) 146 nH 111 nH 79 nH 46.5 nH 23.5 nH 561RAU 100 1000 Inductance (nH) 11 0 1000100 Frequency (MHz) 117 nH 90 nH 66 nH 42 nH 22 nH 615RAU 100 1000 Inductance (nH) 11 0 1000100 Frequency (MHz) 643RAU 155 nH 202 nH 108 nH 66 nH 33 nH 257 nH 1010VS 1010VS 1212VS 1212VS 2014VS 2014VS

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. High Frequency, High Current Power Inductors – 1010VS, 1212VS, 2014VS Document 893-3 Document 893-3 Revised 10/05/17 1010VS 2014VS 1212VS All dimensions are in inches.mm Packaging 1010VS-23N 250/7″ reel; ; 1000/13″ reel; 3.81 mm pocket depth 1010VS-46N 250/7″ reel; ; 900/13″ reel; 4.32 mm pocket depth 1010VS-79N 200/7″ reel; ; 800/13″ reel; 5.05 mm pocket depth Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing 1010VS-111 175/7″ reel; ; 700/13″ reel; 5.84 mm pocket depth 1010VS-141 150/7″ reel; ; 600/13″ reel; 6.35 mm pocket depth Plastic tape: 24 mm wide, 0.40 mm thick, 16 mm pocket spacing 1212VS-22N 450/13″ reel; 8.86 mm pocket depth 1212VS-42N 400/13″ reel; 7.87 mm pocket depth 1212VS-66N 350/13″ reel; 9.02 mm pocket depth 1212VS-90N 300/13″ reel; 10.67 mm pocket depth 1212VS-111 250/13″ reel; 11.68 mm pocket depth Plastic tape: 24 mm wide, 0.50 mm thick, 20 mm pocket spacing 2014VS-33N 500/13″ reel; 6,22 mm pocket depth 2014VS-66N 450/13″ reel; 7,37 mm pocket depth 2014VS-111 400/13″ reel; 8,56 mm pocket depth 2014VS-151 350/13″ reel; 9,45 mm pocket depth 2014VS-201 300/13″ reel; 10,67 mm pocket depth 2014VS-251 250/13″ reel; 11,68 mm pocket depth Plastic tape: 44 mm wide, 0.50 mm thick, 20 mm pocket spacing Height Weight Part number inches mm (g) 1010VS-23N 0.142 3,60 1010VS-46N 0.161 4,10 1010VS-79N 0.189 4,80 1010VS-111 0.220 5,60 1010VS-141 0.240 6,10 0.49 0.65 0.82 0.98 1.23 0.069 1,75 0.211 5,36 Height (See table) 0.100 2,54 0.375 9,53 0.311 7,91 0.394 10,0 max Dash number 0.394 10,0 max min 0.336 ±0.01 8,55 ±0,25 Recommended Land Pattern 0.004 / 0,10 XXX X Internal code 0.453 11,5 max 0.472 12,0 max 0.357 ±0.040 9,07 ±1,02 Height (See table) 0.10 2,54 0.004 / 0,10 0.130 3,30 0.407 10,34 0.348 8,84 Recommended Land Pattern Height Weight 2.2 1212VS-42N 0.299 7,60 2.7 1212VS-66N 0.346 8,80 3.2 1212VS-90N 0.409 10,4 3.7 1212VS-111 0.445 11,3 4.2 Part number inches mm (g) 1212VS-22N 0.260 6,60 Dash number XXX X Internal code 0.218 5,56 min 0.770 19,56 max 0.535 13,60 max Height (See table) 0.004 / 0,10 0.10 2,54 0.13 3,30 0.10 2,54 0.515 16,08 0.150 3,81 0.410 10,41 0.185 4,70 0.643 16,33 0.205 5,21 Recommended Land Pattern Height Weight 1.6 2014VS-66N 0.279 7,09 2.3 2014VS-111 0.327 8,31 3.1 2014VS-151 0.362 9,19 3.6 2014VS-201 0.409 10,4 4.4 2014VS-251 0.449 11,4 5.0 Part number inches mm (g) 2014VS-33N 0.236 5,99 XXX X Dash number Internal code 0.160 4,06 0.290 7,37 0.296 7,52 min Caution: Terminal 3 is provided for mounting stability only. This terminal is connected to the winding of the inductor and must not be connected to ground or any circuitry.