DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. AEC RoHS COMPLIANT Q200 +105°C Halogen FreeOPTION Sample & buy Support & FAQ Web page Tools & software Shielded High SRF Inductors – 1008PS Document 219-1 Document 219-1 Revised 03/05/18 Inductance DCR4 SRF5 Isat (A)6 Irms (A)7 Part ±10%2 Q max typ 10% 20% 30% 20°C 40°C number1 (µH) min3 (Ohms) (MHz) drop drop drop rise rise 1. When ordering, specify termination and packaging codes: 1008PS-105KLC Terminations: L = RoHS compliant, not halogen-free. Silver-palladium-platinum-glass frit terminations R = Halogen free component. Matte tin over nickel over silver-platinum-glass frit terminations. Packaging: C = 7″ machine-ready reel. EIA-481 em- bossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, using Coilcraft SMD-A fixture in Agilent/HP 4263B impedance analyzer or equivalent. 3. Q measured at 1 MHz using an Agilent/HP 16193 test fixture and an Agilent/HP 4291 or equivalent. 4. DCR measured on micro-ohmmeter and Coilcraft CCF840 test fixture. 5. SRF measured using a Coilcraft SMD-D test fixture and an Agilent/HP 8753D network analyzer or equivalent. 6. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 7. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ceramic/Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant; halogen free optional Terminations Silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 122 – 132 mg Ambient temperature –40°C to +105°C with (40°C rise) Irms current. Maximum part temperature +145°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +145°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

  • Higher SRF than our other power inductors
  • High inductance with tight tolerance
  • Excellent current handling for a part this size

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. AEC RoHS COMPLIANT Q200 +105°C Halogen FreeOPTION Document 219-2 Power Chip Inductors – 1008PS Series Typical L vs Frequency Typical L vs Current A B C D E F G max max max max max max typ H I J 3,81 3,78 2,74 1,78 2,59 2,13 0,51 2,54 1,02 1,27 mm Document 219-2 Revised 03/05/18 0.01 0.1 11 0 0.1 100 1000 10000 Inductance (µH) Frequency (MHz) 1000 µH 100 µH 10 µH 1µ H 0.01 0.1 11 0 Current (A) 0.1 100 1000 10000 Inductance (µH) 100 µH 10 µH 1µ H 1000 µH A B FD C E G I I J H Recommended Land Pattern Terminal wraparound: approx 0.015/0,38 both ends