1008HS COILCRAFT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

© Coilcraft, Inc. 2008 Specifications subject to change without notice. Please check our website for latest information. Chip Inductors – 1008HS Series (2520) Document 160-1 Document 160-1 Revised 10/10/08 Coilcraft “HS” series chip inductors have been designed especially for the needs of today’s high frequency de- signer. Their ceramic construction delivers the highest possible SRF and excellent Q values. The non-magnetic coilform also ensures the utmost in thermal stability, pre- dictability and batch consistency. Inductance2 Percent SRF min 5 DCR max6 IIIIIrms7 Part number1 (nH) tolerance 3 Q min4 (MHz) (Ohms) (mA) 1008HS-100T_L_ 10 @ 50 MHz 5 50 @ 500 MHz 4100 0.08 1000 1008HS-120T_L_ 12 @ 50 MHz 5 50 @ 500 MHz 3300 0.09 1000 1008HS-150T_L_ 15 @ 50 MHz 5 50 @ 500 MHz 2500 0.10 1000 1008HS-180T_L_ 18 @ 50 MHz 5 50 @ 350 MHz 2500 0.11 1000 1008HS-220T_L_ 22 @ 50 MHz 5 55 @ 350 MHz 2400 0.12 1000 1008HS-270T_L_ 27 @ 50 MHz 5,2 55 @ 350 MHz 1600 0.13 1000 1008HS-330T_L_ 33 @ 50 MHz 5,2 60 @ 350 MHz 1600 0.14 1000 1008HS-390T_L_ 39 @ 50 MHz 5,2 60 @ 350 MHz 1500 0.15 1000 1008HS-470T_L_ 47 @ 50 MHz 5,2,1 65 @ 350 MHz 1500 0.16 1000 1008HS-560T_L_ 56 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.18 1000 1008HS-680T_L_ 68 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.20 1000 1008HS-820T_L_ 82 @ 50 MHz 5,2,1 60 @ 350 MHz 1000 0.22 1000 1008HS-101T_L_ 100 @ 25 MHz 5,2,1 60 @ 350 MHz 1000 0.56 650 1008HS-121T_L_ 120 @ 25 MHz 5,2,1 60 @ 350 MHz 950 0.63 650 1008HS-151T_L_ 150 @ 25 MHz 5,2,1 45 @ 100 MHz 850 0.70 580 1008HS-181T_L_ 180 @ 25 MHz 5,2,1 45 @ 100 MHz 750 0.77 620 1008HS-221T_L_ 220 @ 25 MHz 5,2,1 45 @ 100 MHz 700 0.84 500 1008HS-271T_L_ 270 @ 25 MHz 5,2,1 45 @ 100 MHz 600 0.91 500 1008HS-331T_L_ 330 @ 25 MHz 5,2,1 45 @ 100 MHz 570 1.05 450 1008HS-391T_L_ 390 @ 25 MHz 5,2,1 45 @ 100 MHz 500 1.12 470 1008HS-471T_L_ 470 @ 25 MHz 5,2,1 45 @ 100 MHz 450 1.19 470 1008HS-561T_L_ 560 @ 25 MHz 5,2,1 45 @ 100 MHz 415 1.33 400 1008HS-621T_L_ 620 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.40 300 1008HS-681T_L_ 680 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.47 400 1008HS-751T_L_ 750 @ 25 MHz 5,2,1 45 @ 100 MHz 360 1.54 360 1008HS-821T_L_ 820 @ 25 MHz 5,2,1 45 @ 100 MHz 350 1.61 400 1008HS-911T_L_ 910 @ 25 MHz 5,2,1 35 @ 50 MHz 320 1.68 380 1008HS-102T_L_ 1000 @ 25 MHz 5,2 35 @ 50 MHz 290 1.75 370 1. When ordering, specify tolerance, termination and packaging codes: 1008HS-102TGLC Tolerance: F =1 % G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C =7 ″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =1 3″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Ambient temperature range: –40°C to +125°C with Irms current +125°C to +140°C with derated current 9. Storage temperature range: Component: –40°C to +140°C Packaging: –40°C to +80°C 10. Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. 11. Electrical specifications at 25°C. 12. Temperature coefficient of inductance: +25 to +125 ppm/°C. For part marking data, see Color Coding section. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

© Coilcraft, Inc. 2008 1008HS Series (2520) Specifications subject to change without notice. Please check our website for latest information. Document 160-2 Document 160-2 Revised 10/10/08 I I J H Recommended Land Pattern A B overall F G E terminal F C Terminal wraparound: approx 0.015/0,38 both ends 1000 900 800 700 600 500 400 300 200 100 Frequency (MHz) Inductance (nH) 1000 10000100101 750 nH 330 nH 100 nH 47 nH 12 nH 100 10 100 Frequency (MHz) Q factor 1000 10000 47 nH 12 nH 330 nH 750 nH 100 nH AB C max max max E F G H I J 2,67 2,41 1,78 2,03 0,51 1,52 2,54 1,02 1,27 mm Weight: 28.3 – 31.5 mg Tape and reel: 2000/7″ reel; 7500/13″ reel 8 mm tape width For packaging data see Tape and Reel Specifications section. Irms Derating -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 Percent of rated rms I 25°C Typical Q vs Frequency Typical L vs Frequency