DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

1008F Series – SMD WIRE WOUND FERRITE CHIP INDUCTORS Rev. A A. Electrical Specifications: P/N L (uH) L Test Freq. (MHz) Tol. Q Min. Q Test Freq. (MHz) SRF Min. (GHz) DCR Max.(Ω) I rms. Max.(mA) 1st Color 2nd Color 3rd Color 1008F-47N_ 0.047 50 K, J 50 50 1.80 0.045 650 YELLOW VIOLET BLACK 1008F-68N_ 0.068 50 K, J 40 50 1.80 0.045 650 BLUE GRAY BLACK 1008F-R10_ 0.100 50 K, J 50 50 1.80 0.196 700 BROWN BLACK BROWN 1008F-R18_ 0.180 50 K, J 50 50 1.00 0.290 700 BROWN GRAY BROWN 1008F-R20_ 0.200 50 K, J 50 50 0.900 0.285 700 RED BLACK BROWN 1008F-R24_ 0.240 50 K, J 50 50 0.900 0.135 700 RED YELLOW BROWN 1008F-R56_ 0.560 7.9 K, J 40 50 0.460 0.300 700 GREEN BLUE BROWN 1008F-R68_ 0.680 7.9 K, J 27 50 0.400 0.320 700 BLUE GRAY BROWN 1008F-1R0_ 1.00 50 K, J 50 50 0.380 0.260 650 BROWN BLACK RED 1008F-1R2_ 1.20 7.9 K, J 48 50 0.210 0.680 650 BROWN RED RED 1008F-1R5_ 1.50 7.9 K, J 41 50 0.190 0.760 630 BROWN GREEN RED 1008F-1R8_ 1.80 7.9 K, J 39 50 0.170 0.840 600 BROWN GRAY RED 1008F-2R2_ 2.20 7.9 K, J 34 50 0.150 1.10 520 RED RED RED 1008F-2R7_ 2.70 7.9 K, J 34 50 0.135 1.28 490 RED VIOLET RED 1008F-3R3_ 3.30 7.9 K, J 32 50 0.120 1.46 450 ORANGE ORANGE RED Note: 1008F -xxx_: “1008F” = Size Type, “xxx” = Inductance, “_” = Tolerance, K= ± 10%, J= ±5%. B. Dimensions: mm (Inch) Series a b c d e f g h 1008F 2.92 (0.115) 2.79 (0.110) 2.03 (0.080) 0.51 (0.020) 1.52 (0.060) 1.27 (0.050) 1.27 (0.050) 2.54 (0.100) C. Color coding: 1. Parts are marked with 3 color dots. The table below shows the significance of each color. 2. Dots 1 and 2 indicate the inductance in nano-Henries. 3. Dot 3 indicates number of zeroes to be added. D. General Information: 1. P/N: 1008F -xxx_: “1008F” = Type, “xxx” = Inductance, “_” = Tolerance. 2. Tolerance “_” : K: ± 10%, J: ± 5% 3. Small and lightweight surface mounting type 4. High Q at high frequency 5. High self-resonance frequency 6. For 15ºC Temperature Rise 7. Inductance & Q measured with HP4291B Impedance Analyzer 8. SRF measured with HP8720D or HP8753E Network Analyzer 9. DCR measured with 16502 milliohm meter 10. Operating temperature: -40°C to +85ºC 11. Inductance and Current Range: From 0.047 uH (650 mA) to 22.0 uH (120 mA) 12. SRF: From 10 MHz to 1800 MHz 13. Unspecified values available on request. 14. MSL: Level 1. 0 = Black 5=Green 1 = Brown 6=Blue 2 = Red 7 = Violet 3 = Orange 8 = Gray 4 = Yellow 9 = White Frontier Electronics Corp.® Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 http://www.frontierusa.com Phone: 1-805-522-9998, Fax: 1-805-522-9989

1008F Series – SMD WIRE WOUND FERRITE CHIP INDUCTORS Rev. A E. Applications: 1. Game Consoles 2. Set Top Boxes 3. Cables Modems 4. Computers 5. Mobile Communication Devices (Cell Phones, Radios, etc.) F. Characteristics Curve: Frontier Electronics Corp.® Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 http://www.frontierusa.com Phone: 1-805-522-9998, Fax: 1-805-522-9989