100363

100363 FAIRCHILD

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 7

Technical content

Features

I 50% power reduction of the 100163 I 2000V ESD protection I Pin/function compatible with 100163 I Voltage compensated operating range = −4.2V to −5.7V I Available to industrial grade temperature range Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Pin Descriptions Connection Diagrams 24-Pin DIP 28-Pin PLCC Order Number Package Number Package Description 100363PC N24E 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 100363QC V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 100363QI V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range ( −40°C to +85°C) Pin Names Description S0–S2 Data Select Inputs A0–A7 A Data Inputs B0–B7 B Data Inputs Za, Zb Data Outputs

www.fairchildsemi.com 2 100363Truth Table H = HIGH Voltage Level L = LOW Voltage Level Blank = X = Don’t Care Logic Diagram Inputs OutputsSelect Data S2 S1 S0 A 7 A 6 A 5 A 4 A 3 A 2 A 1 A 0 Za B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0 Zb LLL L L LLL H H LLH L L LLH H H LHL L L LHL H H LHH L L LHH H H HLL L L HLL H H HLH L L HLH H H HHL L L HHL H H HHHL L HHHH H

3 www.fairchildsemi.com 100363 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015. Commercial Version VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are cho- sen to guarantee operation under “worst case” conditions. VEE = −4.2V to −5.7V, VCC = VCCA = GND VEE = −4.2V to −5.7V, VCC = VCCA = GND Storage Temperature (TSTG ) −65°C to +150°C Maximum Junction Temperature (TJ) +150°C VEE Pin Potential to Ground Pin −7.0V to +0.5V Input Voltage (DC) V EE to + 0.5V Output Current (DC Output HIGH) −50 mA ESD (Note 2) ≥2000V Case Temperature (TC ) Commercial 0 °C to +85°C Industrial −40°C to +85°C Supply Voltage (VEE ) −5.7V to −4.2V Symbol Parameter Min Typ Max Units Conditions VOH Output HIGH Voltage −1025 −955 −870 mV V IN = VIH (Max) Loading with VOL Output LOW Voltage −1830 −1705 −1620 mV or V IL (Min) 50 Ω to −2.0V VOHC Output HIGH Voltage −1035 mV V IN = VIH (Min) Loading with VOLC Output LOW Voltage −1610 mV or V IL (Max) 50 Ω to −2.0V VIH Input HIGH Voltage −1165 −870 mV Guaranteed HIGH Signal for All Inputs VIL Input LOW Voltage −1830 −1475 mV Guaranteed LOW Signal for All Inputs IIL Input LOW Current 0.50 µAV IN = VIL (Min) IIH Input HIGH Current VIN = VIH (Max)Sn 265 µA An, Bn 340 IEE Power Supply Current −80 −40 mA Inputs OPEN Symbol Parameter TC = 0°CT C = +25°CT C = +85°C Units Conditions Min Max Min Max Min Max tPLH Propagation Delay tPHL A0–A7, B0–B7 to Output tPLH Propagation Delay tPHL S0–S2 to Output tTLH Transition Time tTHL 20% to 80%, 80% to 20% Symbol Parameter TC = 0°CT C = +25°CT C = +85°C Units Conditions Min Max Min Max Min Max tPLH Propagation Delay Figures 1, 2 tPHL A0–A7, B0–B7 to Output tPLH Propagation Delay tPHL S0–S2 to Output tTLH Transition Time tTHL 20% to 80%, 80% to 20%

www.fairchildsemi.com 4 100363 Industrial Version VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = −40°C to +85°C Note 4: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are cho- sen to guarantee operation under “worst case” conditions. VEE = −4.2V to −5.7V, VCC = VCCA = GND Symbol Parameter TC = −40°CT C = 0°C to +85°C Units Conditions Min Max Min Max VOH Output HIGH Voltage −1085 −870 −1025 −870 mV V IN = VIH (max) Loading with VOL Output LOW Voltage −1830 −1575 −1830 −1620 mV or V IL (min) 50 Ω to −2.0V VOHC Output HIGH Voltage −1095 −1035 mV V IN = VIH (min) Loading with VOLC Output LOW Voltage −1565 −1610 mV or V IL (max) 50 Ω to −2.0V VIH Input HIGH Voltage −1170 −870 −1165 −870 mV Guaranteed HIGH Signal for All Inputs VIL Input LOW Voltage −1830 −1480 −1830 −1475 mV Guaranteed LOW Signal for All Inputs IIL Input LOW Current 0.50 0.50 µAV IN = VIL (min) IIH Input HIGH Current Sn 265 265 µAV IN = VIH (Max) An, Bn 380 340 IEE Power Supply Current −80 −35 −80 −40 mA Inputs OPEN Symbol Parameter TC = −40°CT C = +25°CT C = +85°C Units Conditions Min Max Min Max Min Max tPLH Propagation Delay Figures 1, 2 tPHL A0–A7, B0–B7 to Output tPLH Propagation Delay tPHL S0–S2 to Output tTLH Transition Time tTHL 20% to 80%, 80% to 20%

www.fairchildsemi.com 6 100363 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide Package Number N24E

7 www.fairchildsemi.com

100363 Low Power Dual 8-Input Multiplexer

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Package Number V28A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com