1.5SMC400CA

1.5SMC6.8A SY

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 7

Technical content

F eatures For surface mounted applications in order to optimize board space Low profile package Built in strain relief Glass p assivated j unction Low inductance Excellent clamping capability 150 0W peak pulse power capability at 10/1000 μ s waveform, r epetition r ate (duty cycle): 0.01% Fast response time Typical IR less than 1μA above 12V High Temperature soldering: 260 /10 seconds at terminals Plastic package has underwriters laboratory flammability 94V Meets MSL level 1, per J STD 020 Saf ety certification: UL: E244458 IEC61000 ESD 30KV Air, 30KV contact compliance Mechanical Data Case: JEDEC DO 214A B . Molded plastic over glass passivated junction Terminal: Tin plated solderable per MIL STD 750, Method 2026 Polarity: Color band denotes cathode except bi directional models Standard Packaging: 1 mm tape (EIA STD RS 481) Weight: 0. g

Applications

Low frequency signal transmission line (RS232, RS4 85, etc.) Maximum Ratings and Characteristics Notes: 1. Non repetitive current pulse, per Fig.3 and derated above T A =25 per Fig.2. 2. Mounted on 8.0mm 8.0mm copper pads to each terminal. 3. 8.3ms single half sine wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum. Ratings at 25 ambient temperature unless otherwise specified. Rating Symbol Value Units Peak pulse power dissipation at 10/1000μs waveform (Note1, Note2, Fig.1) P PPM Minimum 1500 W atts Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3) I PPM See Table A mps Steady state power dissipation at T A =50 (Fig.5) P M (AV) 6.5 W atts Peak forward surge current, 8.3ms single half sine wave superimposed on rated load, (JEDEC Method) (Note3, Fig.6) I FSM 200 A mps Operating junction and Storage Temperature Range. T J STG 5 to +150 Typical thermal resistance junction to lead R θJL Typical thermal resistance junction to ambient R θJA www.shunyegroup.com.cn V2.22 1.5SMC6.8A THRU 1.5SMC600CA Transient Voltage Suppressors (TVS) Data Sheet

T Test Current Maximum Clamping Voltage@I PP Peak Pulse Current Reverse Leakage RWM U nidirectional B idirectional UNI BI V RWM (V) V BR (V) I T (mA) V C (V) I PP (A) I R (μA) 1.5SMC6.8A 1.5SMC6.8CA 6V8A 6V8C 5.80 6.45 7.14 10.5 144.8 1000 1.5SMC7.5A 1.5SMC7.5CA 7V5A 7V5C 6.40 7.13 7.88 11.3 134.5 500 1.5SMC8.2A 1.5SMC8.2CA 8V2A 8V2C 7.02 7.79 8.61 12.1 125.6 200 1.5SMC9.1A 1.5SMC9.1CA 9V1A 9V1C 7.78 8.65 9.55 13.4 113.4 1.5SMC10A 1.5SMC10CA 10A 10C 8.55 9.50 10.50 14.5 104.8 1.5SMC11A 1.5SMC11CA 11A 11C 9.40 10.50 11.60 15.6 97.4 1.5SMC12A 1.5SMC12CA 12A 12C 10.20 11.40 12.60 16.7 91.0 1.5SMC13A 1.5SMC13CA 13A 13C 11.10 12.40 13.70 18.2 83.5 1.5SMC15A 1.5SMC15CA 15A 15C 12.80 14.30 15.80 21.2 71.7 1.5SMC16A 1.5SMC16CA 16A 16C 13.60 15.20 16.80 22.5 67.6 1.5SMC18A 1.5SMC18CA 18A 18C 15.30 17.10 18.90 25. 60.3 1.5SMC20A 1.5SMC20CA 20A 20C 17.10 19.00 21.00 27.7 54.9 1.5SMC22A 1.5SMC22CA 22A 22C 18.80 20.90 23.10 30.6 49.7 1.5SMC24A 1.5SMC24CA 24A 24C 20.50 22.80 25.20 33.2 45.8 1.5SMC27A 1.5SMC27CA 27A 27C 23.10 25.70 28.40 37.5 40.5 1.5SMC30A 1.5SMC30CA 30A 30C 25.60 28.50 31.50 41.4 36.7 1.5SMC33A 1.5SMC33CA 33A 33C 28.20 31.40 34.70 45.7 33.3 1.5SMC36A 1.5SMC36CA 36A 36C 30.80 34.20 37.80 49.9 30.5 1.5SMC39A 1.5SMC39CA 39A 39C 33.30 37.10 41.00 53.9 28.2 Dimensions (SMC/DO 214AB) D D L T d H T H Symbol Millimeters Inches Min. Max. Min. Max. L 6.60 7.11 0.260 0.280 D 5.59 6.22 0.220 0.245 2.90 3.20 0.114 0.126 T 7.75 8.13 0.305 0.320 0.76 1.52 0.030 0.060 d 0.203 0.008 H 2.20 2.80 0.087 0.110 2.06 2.62 0.079 0.103 E lectrical Characteristics T A =25 www.shunyegroup.com.cn V2.22 1.5SMC6.8A THRU 1.5SMC600CA

1.5SMC43A 1.5SMC43CA 43A 43C 36.80 40.90 45.20 59.3 25.6 1.5SMC47A 1.5SMC47CA 47A 47C 40.20 44.70 49.40 64.8 23.5 1.5SMC51A 1.5SMC51CA 51A 51C 43.60 48.50 53.60 70.1 21.7 1.5SMC56A 1.5SMC56CA 56A 56C 47.80 53.20 58.80 77.0 19.7 1.5SMC62A 1.5SMC62CA 62A 62C 53.00 58.90 65.10 85.0 17.9 1.5SMC68A 1.5SMC68CA 68A 68C 58.10 64.60 71.40 92.0 16.5 1.5SMC75A 1.5SMC75CA 75A 75C 64.10 71.30 78.80 103.0 14.8 1.5SMC82A 1.5SMC82CA 82A 82C 70.10 77.90 86.10 113.0 13.5 1.5SMC91A 1.5SMC91CA 91A 91C 77.80 86.50 95.50 125.0 12.2 1.5SMC100A 1.5SMC100CA 100A 100C 85.50 95.00 105.00 137.0 11.1 1.5SMC110A 1.5SMC110CA 110A 110C 94.00 105.00 116.00 152.0 10.0 1.5SMC120A 1.5SMC120CA 120A 120C 102.00 114.00 126.00 165.0 9.2 1.5SMC130A 1.5SMC130CA 130A 130C 111.00 124.00 137.00 179.0 8.5 1.5SMC150A 1.5SMC150CA 150A 150C 128.00 143.00 158.00 207.0 7.3 1.5SMC160A 1.5SMC160CA 160A 160C 136.00 152.00 168.00 219.0 6.9 1.5SMC170A 1.5SMC170CA 170A 170C 145.00 162.00 179.00 234.0 6.5 1.5SMC180A 1.5SMC180CA 180A 180C 154.00 171.00 189.00 246.0 6.2 1.5SMC200A 1.5SMC200CA 200A 200C 171.00 190.00 210.00 274.0 5.5 1.5SMC220A 1.5SMC220CA 220A 220C 185.00 209.00 231.00 328.0 4.6 1.5SMC250A 1.5SMC250CA 250A 250C 214.00 237.00 263.00 344.0 4.4 1.5SMC300A 1.5SMC300CA 300A 300C 256.00 285.00 315.00 414.0 3.7 1.5SMC350A 1.5SMC350CA 350A 350C 300.00 332.00 368.00 482.0 3.2 1.5SMC400A 1.5SMC400CA 400A 400C 342.00 380.00 420.00 548.0 2.8 1.5SMC440A 1.5SMC440CA 440A 440C 376.00 418.00 462.00 602.0 2.5 1.5SMC480A 1.5SMC480CA 480A 480C 408.00 456.00 504.00 658.0 2.3 1.5SMC510A 1.5SMC510CA 510A 510C 434.00 485.00 535.00 698.0 2.1 1.5SMC530A 1.5SMC530CA 530A 530C 450.00 503.50 556.50 725.0 2.1 1.5SMC540A 1.5SMC540CA 540A 540C 459.00 513.00 567.00 740.0 2.0 1.5SMC550A 1.5SMC550CA 550A 550C 467.00 522.50 577.50 760.0 2.0 1.5SMC600A 1.5SMC600CA 600 A 510.00 570.00~630.00 828.0 1.8 Part Number Device Marking Code Reverse Stand Off Voltage Breakdown Voltage T Test Current Maximum Clamping Voltage@I PP Peak Pulse Current Reverse Leakage RWM U nidirectional B idirectional UNI BI V RWM (V) V BR (V) I T (mA) V C (V) I PP (A) I R (μA) E lectrical Characteristics T A =25 www.shunyegroup.com.cn V2.22 1.5SMC6.8A THRU 1.5SMC600CA

Figure 1. Peak Pulse Power Rating Curve

100 Peak Value IPPM

Figure 5. Steady State Power Dissipation Derating Figure 2. Pulse Derating Curve Figure 6. Maximum Non Figure 3. Pulse Waveform

Recommended Soldering Conditions Reflow Soldering T P T L t S P r e h e a t T S m a x T S m i n R a m p u p R a m p d o w n C r i t i c a l Z o n e T L t o T P t P t L t t o P e a k T i m e T e m p e r a t u r e Recommended Conditions Profile Feature Pb Free Assembly Average ramp up rate (T L to T P /second max. Preheat Temperature Min (T S min Temperature Max (T S max Time (min to max) (t S 150 200 180 seconds T S max to T L Ramp up Rate /second max. Time maintained above: Temperature (T L Time (t L 217 150 seconds Peak Temperature (T P 260 Time within 5 of actual Peak Temperature (t P 40 seconds Ramp down Rate /second max. Time 25 to Peak Temperature 8 minutes max. www.shunyegroup.com.cn V2.22 1.5SMC6.8A THRU 1.5SMC600CA

1.5SMC XXX C A Bidirectional Series Code VBR Voltage 5% VBR Voltage Tolerance XXXX Package Code TR7:7 inch reel package TR13:13 inch reel package Ordering Code for Different Package 7 inch reel package: Add suffix “ /TR7 ” at the end of the part number, such as 1.5SMCXXXCA/TR7 13 inch reel package: Add suffix “ /TR13 or ” at the end of the part number, such as 1.5SMCXXXCA/TR13 Cathode Band Periodic Code XXX Logo XX Marking Code Periodic Code XXX Logo XX Marking Code www.shunyegroup.com.cn V2.22 1.5SMC6.8A THRU 1.5SMC600CA

F W T B B SECTION B-B A A SECTION A-A Symbol Dimension (mm) W 16.00 ± 0. 4.00 ± 0.10 8.00 ± 0.10 2.00 ± 0. Φ 1.5 ± 0. Φ 1.5 ± 0. E 1.75 ± 0.10 F 7.50 ± 0. 6.27 ± 0.1 8.30 ± 0.1 3.15 ± 0.1 T 0.30 ± 0. Reel Φ 178.0 2.0 Φ 50.0Min. Φ 13.0 0.5 20.0 2.0 Q uantity: 500PCS Reel Φ 330.0 2.0 Φ 13.5 0.5 H 2.5 1.0 20.0 2.0 Q uantity: 3000PCS www.shunyegroup.com.cn V2.22 1.5SMC6.8A THRU 1.5SMC600CA