1.5KE-G_12 COMCHIP

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Features

-Case: Molded plastic DO-201 -Terminals: Axial leads, solderable per MIL-STD-202, Method 208 guranteed -Polarity: Color band denotes cathode end except Bipolar Dimensions in inches and (millimeter) DO-201 -Glass passivated chip. -Low leakage. -1500W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle): 0.01%. -Uni and Bidirectional unit. -Excellent clamping capability. -Very fast response time. -Epoxy: UL 94V-0 rate flame retardant -Approx. weight: 0.844 grams -Mounting position: Any 0.375(9.53) 1.000(25.40) Min. 0.209(5.30) DIA. 0.042(1.07) DIA. 0.038(0.97) DIA. 0.189(4.79) DIA. 0.285(7.24) 1.000(25.40) Min. SymbolParameter Value Unit Peak power dissipation with a 10/1000 s μ (Note 1) 200 Peak forward surge current, 8.3ms single half sine-wave unidirectional only (JEDEC method) (Note 2) Operating junction and storage temperature range PPP 6.5 1500 -55 to +150 W W A Power dissipation on infinite heatsink at TL=75°C NTOES: (1) Non-repetitive current pulse, per fig.5 and derated above TA=25°C per fig.1 (2) Measured on 8.3ms single half sine-wave or equivalent square wave, equare wave, duty cycle=4 pulses per minute maximum (3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V PD IFSM TJ, TSTG Peak pulse current with a 10/1000 waveform μs (Note 1) IPP See Next Table A waveform 3.5/5.0Maximum instantaneous forward voltage at

100 A for unidirectional only(Note 3) VVF

RATING AND CHARACTERISTIC CURVES (1.5KE6.8-G Thru. 1.5KE600-G ) 1500W Transient Voltage Suppressor Page 2QW-BTV07 REV:B Fig.2- Steady State Power Derating CurveFig.1- Pulse Derating Curve Peak Pulse Derating in % of Peak Power or Current (%) 100 0 25 50 75 100 125 150 175 Ambient Temperature, (TA °C) Steady State Power Dissipation, (W) Lead Temperature, (°C)TL 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 25 75 125 17550 100 150 200 Fig.3- Max. Non-repetitive Surge Current Peak Forward Surge Current, (A) Number of Cycles at 60Hz 160 10 100 120 200 8.3ms single half sine-wave TJ = TJ max. Fig.4- Typical Junction Capacitance Junction Capacitance, CJ (pF) Reverse Breakdown Voltage (V),VBR 10000 1000 100 10 100 10001 100000 Bi-directional @zero bias Uni-directional @VRWM TJ=25°C f=1.0MHz Bi-directional @ VRWM Uni-directional @zero bias Time, (ms) Fig.5- Pulse Waveform Peak Pulse Current, (%) 125 1 2 3 4 100 td Pulse width (td) is defined as the point where the peak current decays to 50% of IPP Tr = 10μs Peak value IPP Half value = IPP/2 TJ = 25°C 10/1000μs. Waveform as defined by R.E.A. Pulse Width, td (μs) Fig.6- Peak Pulse Power Rating Curve Peak Power (kW) 1001010.1 0.1 100 100001000

1500W Transient Voltage Suppressor Page 3QW-BTV07 REV:B MIN.(V) MAX.(V) Part No. Maximum Clamping Voltage Vc(V)IT(mA) VBR (V) @ IT Breakdown Voltage Working Peak Reverse Voltage VRWM (V) Maximum Reverse Leakage at VRWM IR (uA) Maximum Reverse Surge IPP(A) Electrical Characteristics ( )1.5KE6.8-G Thru. 1.5KE600-G Current UNI BI Marking Code 1.5KE6.8 1.5KE6.8C 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE6.8CA 1.5KE7.5C 1.5KE7.5CA 1.5KE8.2C 1.5KE8.2CA 1.5KE9.1C 1.5KE9.1CA 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 1.5KE56 1.5KE56A 1.5KE62 1.5KE62A 1.5KE10C 1.5KE10CA 1.5KE11C 1.5KE11CA 1.5KE12C 1.5KE12CA 1.5KE13C 1.5KE13CA 1.5KE15C 1.5KE15CA 1.5KE16C 1.5KE16CA 1.5KE18C 1.5KE18CA 1.5KE20C 1.5KE20CA 1.5KE22C 1.5KE22CA 1.5KE24C 1.5KE24CA 1.5KE27C 1.5KE27CA 1.5KE30C 1.5KE30CA 1.5KE33C 1.5KE33CA 1.5KE36C 1.5KE36CA 1.5KE39C 1.5KE39CA 1.5KE43C 1.5KE43CA 1.5KE47C 1.5KE47CA 1.5KE51C 1.5KE51CA 1.5KE56C 1.5KE56CA 1.5KE62C 1.5KE62CA

1500W Transient Voltage Suppressor Page 4QW-BTV07 REV:B MIN.(V) MAX.(V) Part No. Maximum Clamping Voltage Vc(V)IT(mA) VBR (V) @ IT Breakdown Voltage Working Peak Reverse Voltage VRWM (V) Maximum Reverse Leakage at VRWM IR (uA) Maximum Reverse Surge IPP(A) Electrical Characteristics ( )1.5KE6.8-G Thru. 1.5KE600-G Current UNI BI Marking Code 1.5KE68 1.5KE68C 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE68CA 1.5KE75C 1.5KE75CA 1.5KE82C 1.5KE82CA 1.5KE91C 1.5KE91CA 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE380 1.5KE380A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A 1.5KE500 1.5KE500A 1.5KE520 1.5KE520A 1.5KE550 1.5KE550A 1.5KE600 1.5KE600A 1.5KE100C 1.5KE100CA 1.5KE110C 1.5KE110CA 1.5KE120C 1.5KE120CA 1.5KE130C 1.5KE130CA 1.5KE150C 1.5KE150CA 1.5KE160C 1.5KE160CA 1.5KE170C 1.5KE170CA 1.5KE180C 1.5KE180CA 1.5KE200C 1.5KE200CA 1.5KE220C 1.5KE220CA 1.5KE250C 1.5KE250CA 1.5KE300C 1.5KE300CA 1.5KE350C 1.5KE350CA 1.5KE380C 1.5KE380CA 1.5KE400C 1.5KE400CA 1.5KE440C 1.5KE440CA 1.5KE500C 1.5KE500CA 1.5KE520C 1.5KE520CA 1.5KE550C 1.5KE550CA 1.5KE600C 1.5KE600CA 98.0 92.0 108.0 103.0 15.31 16.30 13.89 14.56 5.0 5.0 5.0 5.0 55.1 58.1 60.7 64.1 1.0 1.0 1.0 1.0 74.80 71.40 82.50 78.75 61.20 64.60 67.50 71.25 1.5KE68(C)A-G 1.5KE75(C)A-G 1.5KE68(C)-G 1.5KE75(C)-G 131.0 125.0 118.0 113.0 12.71 13.27 12.00 11.45 73.80 90.20 77.90 86.10 81.90 100.10 86.45 95.55 66.4 70.1 73.7 77.8 Notes: 1. Suffix A denotes 5% tolerance devices. Without A denotes 10% tolerance devices. 2. Add s C or CA after part number to specify bi-directional devices.uffix 3. For bi-directional devices having VR of 10 volts and under, the IR limit is double.

1500W Transient Voltage Suppressor Page 5QW-BTV07 REV:B B Taping Specification For Axial Lead Diodes E A Z T E 90° ± 5° L H W D D Do 0.039 (max) 1.00 (max) 0.039 (max) 1.00 (max) B Z T E A SYMBOL (mm) (inch) DO-201 L W H 75.00 2.953 145.00 5.709 260.00 10.236 D 330.00 13.000 D1 D0 85.70 ± 0.30 3.374 ± 0.012 16.60 ± 0.40 0.654 ± 0.016 72.00 ± 3.00 2.835 ± 0.118 (inch) (mm)DO-201 SYMBOL

1500W Transient Voltage Suppressor Page 6QW-BTV07 REV:B Standard Packaging Marking Code Note: (1)Suffix code after part number to specify packaging item. Packaging AMMO PACK REEL PACK Code NA T BULK PACK B Part Number 1.5KE (C)A-GXXX1.5KEXXX(C)-G 1.5KE (C)T-GXXX 1.5KE (C)B-GXXX 1.5KE (C)AT-GXXX 1.5KE (C)AB-GXXX (2)XXX on behalf of serial products. Case Type DO-201AD 1,200 REEL ( pcs ) Reel Size (inch) Case Type DO-201AD 1,000 BOX ( pcs ) AMMO PACK CARTON ( pcs ) 10,000 Case Type DO-201AD 200 BOX ( pcs ) BULK PACK CARTON ( pcs ) 10,000 REEL PACK