1.5KE6.8 MIC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS E-mail: sales@cnmic.com Web Site: www.cnmic.com 1.5KE6.8 THRU 1.5KE440CA(GPP) Breakdown Voltage 6.8 to 440 Volts 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Peak Pulse Power 1500 Watts

FEATURES

  • Plastic package has Underwriters Laboratory Flammability Classification 94V-O
  • Glass passivated junction or silastic guard junction (open junction)
  • 1500W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.05%
  • Excellent clamping capability
  • Low incremental surge resistance
  • Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types
  • Devices with V(BR)≥10V, ID are typically less than 1.0μA
  • High temperature soldering guaranteed: 265℃/10 seconds, 0.375” (9.5mm) lead length, 51bs.(2.3kg) tension MECHANICAL DATA
  • Cass: molded plastic body over passivated junction
  • Terminals: plated axial leads, solderable per MIL-STD-750, Method 2026
  • Polarity: Color bands denotes positive end (cathode) except for bidirectional
  • Mounting Position: any
  • Weight: 0.045 ounces, 1.2 grams DEVICES FOR BIDRECTIONAL APPLICATIONS 1.5KE440CA).Electrical Characteristics apply in both directions.
  • Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Symbols Value Unit Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1) PPPM Minimum 400 Watts Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.1) IPPM See Table 1 Amps Steady Stage Power Dissipation at TL=75℃ Lead lengths 0.375”(9.5mm)(Note2) PM(AV) 5.0 Watts Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) unidirectional only IFSM 200.0 Amps Maximum instantaneous forward voltage at 100.0A for unidirectional only (NOTE 3) VF 3.5/5.0 Volts Operating Junction and Storage Temperature Range T J, TSTG 50 to +150 ℃ Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2 2. Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5. 3. VF=3.5 V for devices of V (BR) ≤200V, and VF=5.0 Volts max. for devices of V(BR)＞200v 1.0(25.4) MIN MIN 1.0(25.4) .375(9.5) .335(8.5) DIA .038(0.96) .042(1.06) DIA.220(5.6) .197(5.0) Dimensions in inches and (millimeters) DO-201(DO-27)

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS E-mail: sales@cnmic.com Web Site: www.cnmic.com 1.5KE6.8 THRU 1.5KE440CA(GPP) Breakdown Voltage 6.8 to 440 Volts 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Peak Pulse Power 1500 Watts Breakdown Voltage V(BR)(Volts) (Note 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 1.5KE10/J 9 11 1 8.1 10 100 15 0.073

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS E-mail: sales@cnmic.com Web Site: www.cnmic.com 1.5KE6.8 THRU 1.5KE440CA(GPP) Breakdown Voltage 6.8 to 440 Volts 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Peak Pulse Power 1500 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d) Breakdown Voltage V(BR)(Volts) (Note 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) (Note3) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 1.5KE100/J 90 110 1 81 5 10.4 144 0.106 1.5KE100A/J 95 105 1 85.5 5 10.9 137 0.106 1.5KE110/J 99 121 1 89.2 5 9.5 158 0.107 1.5KE110A/J 105 116 1 94 5 9.9 152 0.107 1.5KE120/J 108 132 1 97.2 5 8.7 173 0.107 1.5KE120A/J 114 126 1 102 5 9.1 165 0.107 1.5KE130/J 117 143 1 105 5 8 187 0.107 1.5KE130A/J 124 137 1 111 5 8.4 179 0.107 1.5KE150/J 135 165 1 121 5 7 215 0.108 1.5KE150A/J 143 159 1 128 5 7.2 207 0.108 1.5KE160/J 144 175 1 130 5 6.5 230 0.108 1.5KE160A/J 152 167 1 136 5 6.8 219 0.108 1.5KE170/J 153 187 1 138 5 6.1 244 0.108 1.5KE170A/J 162 179 1 145 5 6.4 234 0.108 1.5KE180/J 162 197 1 146 5 5.8 258 0.108 1.5KE180A/J 171 189 1 154 5 6.1 246 0.108 1.5KE200/J 180 220 1 162 5 5.2 287 0.108 1.5KE200A/J 190 210 1 171 5 5.5 274 0.108 1.5KE220/J 198 242 1 175 5 4.4 344 0.108 1.5KE220A/J 209 231 1 185 5 4.6 328 0.108 1.5KE250/J 25 275 1 202 5 4.2 360 0.11 1.5KE250A/J 237 267 1 214 5 4.4 344 0.11 1.5KE300/J 270 330 1 243 5 3.5 430 0.11 1.5KE300A/J 285 315 1 245 5 3.6 414 0.11 1.5KE350/J 315 385 1 284 5 3 504 0.11 1.5KE350A/J 332 368 1 300 5 3.1 482 0.11 1.5KE400/J 360 440 1 324 5 2.6 574 0.11 1.5KE400A/J 380 420 1 342 5 2.7 548 0.11 1.5KE440/J 396 484 1 356 5 2.4 631 0.11 1.5KE440A/J 418 462 1 376 5 2.5 602 0.11 Notes:/ (1) V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent (2) Surge current waveform per Figure 3 and derate per Fig.2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (4) For bidirectional type having VWM of 10 volts and less, the lD limit is doubled

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS E-mail: sales@cnmic.com Web Site: www.cnmic.com 1.5KE6.8 THRU 1.5KE440CA(GPP) Breakdown Voltage 6.8 to 440 Volts 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Peak Pulse Power 1500 Watts TJ=25 ℃ f = 1.0MHz Vsig = 50mVp-p Voltage Stand-Off V =RATEDR RV =0 BIDIRECTIONAL UNIDIRECTIONAL RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J 200 100 100101 NUMBER OF CYCLES AT 60 Hz AMPERES PEAK FORWARD SURGE CURRENT,PEAK FIG.6 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY JEDEC Method 8.3ms Single Half Since-Wave maxJ=TJT 1.25 2.50 3.75 5.00 0 200175150125100755025 LT ,LEAD TEMPERATURE ℃ WATTS STEADY STATE POWER DISSIPATION,PM(A V), FIG.5- STEADY STATE POWER DERATING CURVE 5 10100 500 VOLTS(BR)V ,BREALDOWN VOLTAGE, CJ, CAPACITANCE, pF 10,000 1,000 100 FIG.4- TYPICAL JUNCTION CAPACITANCE t, TIME, ms 0 1.0 2.0 3.04.0 150 100 0 25 50 75 100 125 150 175 200 100 PPIOR CURRENT( )P PPPEAK PULSE POWER ( ) DERATING IN PERCENTAGE % T , AMBIENT TEMPERATURE (℃)A FIG.2- PULSE DERATING CURVE 100 1.0 0.1 10ms0.1μs1.0 μs 10μs100 μs1.0ms FIG.1- PEAK PULSE POWER RATING CURVE P PM,P PEAK PULSE POWER, kW Non-Repetitive Pulse Waveform TA=25 ℃ Shown in Figure 3 dt ,PULSE WIDTH, SEC IPP M, PEAK PULSE CURRENT ,% FIG.3- PULSE WAVEFORM 60 Hz Resistive or induction loadL = 0.375" (9.5mm) LEAD LENGTHS COPPER HEAT SINKS (20×20×1mm) 0.8×0.8×0.040" td tf=10use Peak Value lppm Half Value-lpp as Defined by R.E.A. 10/1000usec Waveform Pulse Width (td)is Defined as the Point Where the Peak Current Decays to 50% of lpp

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS E-mail: sales@cnmic.com Web Site: www.cnmic.com 1.5KE6.8 THRU 1.5KE440CA(GPP) Breakdown Voltage 6.8 to 440 Volts 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Peak Pulse Power 1500 Watts RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J 100 2.0 1.0 0.2 0.1 0.5 1 2.0 102050 100 2.0 1.0 0.2 0.1 0.51 2.010 2050 100 2.0 1.0 0.2 0.1 0.5 1 2.010 505020102.010.5 0.1 0.2 1.0 2.0 100 1.5KE7.5C 1.5KE11C 1.5KE15C 1.5KE30C 1.5KE39C 1.5KE75C 1.5KE200C 1.5KE7.5C 1.5KE11C 1.5KE15C 1.5KE30C 1.5KE39C 1.5KE75C 1.5KE200C WAVEFORM 8×20 IMPULSE △Vc = Vc *V(BR) (BR)Vc = Vc *V△ 10×100 IMPULSE WAVEFORM 1.5KE9.1 1.5KE6.8 1.5KE33 1.5KE39 1.5KE75 1.5KE130 1.5KE200WAVEFORM 10×1000 IMPULSE △Vc = Vc *V(BR) 1.5KE12 1.5KE18 1.5KE9.1 1.5KE6.8 1.5KE33 1.5KE39 1.5KE75 1.5KE100 1.5KE130 1.5KE200(BR)Vc = Vc *V△ 8×20 IMPULSE WAVEFORM PPI , PEAK PULSE CURRENT, AMPSPPI , PEAK PULSE CURRENT, AMPS PPI , PEAK PULSE CURRENT, AMPSI , PEAK PULSE CURRENT, AMPSPP INCREMENTAL CLAMPING VOLTAGEVC,△ INCREMENTAL CLAMPING VOLTAGEVC,△ INCREMENTAL CLAMPING VOLTAGEVC,△ △VC, INCREMENTAL CLAMPING VOLTAGE FIG.10- INCREMENTAL CLAMPING VOLTAGE CURVE BIDIRECTIONAL FIG.9- INCREMENTAL CLAMPING VOLTAGE CURVE BIDIRECTIONAL FIG.8- INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL FIG.7- INCREMENTAL CLAMPING VOLTAGE CURVE UNIDIRECTIONAL

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS E-mail: sales@cnmic.com Web Site: www.cnmic.com 1.5KE6.8 THRU 1.5KE440CA(GPP) Breakdown Voltage 6.8 to 440 Volts 1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION) Peak Pulse Power 1500 Watts RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J INSTANTANEOUS FORWARD CURRENT AMPERES 0.1 FORWARD CURRENT VOLTAGE CHARAVTERISTICS CURVE FIG.11- INSTANTANEOUS FORWARD TJ=25 ℃ 1% DUTY CYCLE PULSE WIDTH=300 μs UNIDIRECTIONAL (ONLY) BIDIRECTIONAL UNIDIRECTIONAL TEMPERATURE COEFFICIENT CURVE FIG.12- BREAKDOWN VOLTAGE 50020010050201051 100 1000 100 TEMPERATURE COEFFICIENT- mV℃v,θ (BR)V ,BREAKDOWN VOLTAGE, VOLTS