DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

[HE] @ 0ZCJ Series -1206 Chip RoHS 6 Compliant & Halogen-Free Application All high-density boards Product Features

1206 Chip Size , Fast Trip Time, Low DCR Resistance

Operating (Hold Current) Range 50mA - 2A Maximum Voltage a Als 6 - 60V (per table) - Temperature Range - -40°C to 85°C a e Agency Approval y TUV (Std. EN60738-1-1, Cert. R50102117) ae UL Component (Std. UL1434, File E305051) \\ " UL Conditions of Acceptability: oc 1. These devices have been investigated for use in safety circuits and are suitable as F a limiting device. Oo a - 2. These devices have been calibrated to limit the current to 8 amps within 5 seconds, per ANSI/NFPA 70, “National Electrical Code” LEAD FREE = (PB Electrical Characteristics (23°C) HALOGEN FREE = [HF] Hold Trip Rated | Maximum | Typical | Max Time to Trip |Resistance Tolerance! Agency Approvals Part Number | Current | Current | Voltage | Current _| Power | Current| Time | Rmin | Rimax | a WHA | TTA |Vmax, Vdel_Imax,A | Pd,W | A | Sec | Ohms | Ohms _| Tov ozcyooosFF2e| 0.05 | 0.15 | 60 | to | o4 | 025 | 150 | 3600 | sooo | vy | ¥ [alozcoo10FF2e| 0.10 | 025 | 60 | 10 | 04 | 050 | 1.00 | 1.600 | 15000 | y | ¥ | plozCuoo12FF2E| 0.12 | 039 | 48 | 40 | 06 | 1.00 | 0.20 | 1.400 | 6500 | oy | iy ie| ozcJoozsFr2e| 0.25 | oso | 46 | 100 | o6 | 800 | 008 | oss0 | 2900 | oy | ¥ ozcuoo2saF2é| 0.25 | 050 | 24 | 40 | o6 | 800 | 008 | 0550 | 2900 | vy | ¥ OZCJOOSOAFZE| 0.50 | 1.00 | 24 | 100 | o6 | 800 | 010 | 0150 | 0.750 iva OzcvOO7SAF2E| 0.75 | 1.60 | 16 | 400 | 06 | 800 | 020 | 0.090 | 0.290 | vy |v [1 JozcuotooFF2e| 74.00 | 480 | 6 | 100 | o6 | 800 | 030 | 0055 | o210 | y | ¥ OzcJo1i0FF2e| 1.10 | 220 | 8 | 400 | 08 | 800 | 0.30 y [KlozcsotsorF2c| 1.50 | 300 | 8 | 100 | o8 | 800 | 100 | oo | o120 | Y | ¥ ozcuozoorF2c| 2.00 | 350 | 6 | 100 | o8 | 800 | 150 | 0018 | oos | Y | ¥ IH Hold Current-maximum current at which the device will not trip in still air at 23°C. Tv Trip current-minimum current at which the device will always trip in still air at 23°C. Imax Maximum fault current device can withstand without damage at rated voltage (Vmax). Vmax Maximum voltage device can withstand without damage at its rated current. Pd Typical power dissipated by device when in tripped state in 23°C still air environment. Rmin Minimum device resistance at 23°C. Rimax Maximum device resistance at 23°C, 1 hour after initial device trip, or after being soldered to PCB in end application.

7 Specifications subject to change without notice

ae. POWER era? 206 Van Vorst Street techhelp@belf.com ee abel group Jersey City, NJ 07302 USA belfuse.com © 2016 Bel Fuse, Inc. OZCJ Nov2016 1/4

[HF] @ OZCJ Series -1206 Chip RoHS 6 Compliant & Halogen-Free PTC's - Basic Theory of Operation / “Tripped” Resistance Explanation Fundamentally, a Bel PTC consists of a block of polymeric material containing conductive filler and bonded between two conductive, planar terminations. At currents below the device IHOLD rating, AND at temperatures below 100C, the PTC maintains a resistance value below its R1 MAX rating. As the device's temperature approaches 130C, either due to an increase in ambient temperature or a current exceeding its | TRIP rating, volumetric expansion of the filled polymer breaks apart the majority of conductive pathways across the terminals created by chain contact of adjacent filler particles or device resistance increases sharply by several orders of magnitude. At the much higher “Tripped” resistance, there is just enough leakage current to allow internal heating to “hold” the device in its tripped state (around 125C) until power is interrupted. Once power is removed, the PTC's core cools and contracts allowing conductive chains to reform and return the device to its low resistance state. The catalog data for each device specifies a "Typical Power" value. This is the power required to exactly match the heat lost by the tripped device to its ambient surroundings at 23C. By Ohm's Law, power can be stated as: W = E42/R. Thus the approximate resistance of a “Tripped” PTC can be determined by: R = E2/W, where "E" is the voltage appearing across the PTC (usually the supply's open circuit voltage), and "W" is the Typical Power value for the particular PTC. Since the PPTC acts to maintain a constant internal temperature, its apparent resistance will change based upon applied voltage and, to a lesser degree, ambient conditions. Consider the following example... A PTC with a Typical Power of 1 watt protecting a circuit using a 60V supply will demonstrate an apparent, tripped resistance "R" of: R = 6042/1 = 3,600 ohms This same tripped device when used to protect a 12V circuit would now present an apparent resistance of: R = 1242/1 = 144 ohms The value for Typical Power is "typical" because any physical factors that affect heat loss (such as ambient temperature or air convection) will somewhat alter the level of power that the PTC needs to maintain its internal temperature. In short, PTCs do not exhibit a constant, quantifiable tripped resistance value. Type Time - To - Trip at 237 (See Elec. Characteristics Table for P/N - Curve correlation) ABCDEF G HI JKL o PATA AAA A I AVA AYA

0 LAWALL

» “WAY 2 \\ 2 1 Nase : \\ : WO = \\ O41 QA XK AN fp —— AA RAR or FN AY TR ot 1 Fault Current (a) 1° 100 Specifications subject to change without notice tee LUTION n(@ a Bel Fuse Inc. +1 201.432.0463 _° ae PROTECTION 206 Van Vorst Street techhelp@belf.com ss abel group Jersey City, NJ 07302 USA belfuse.com © 2016 Bel Fuse, Inc. OZCJ Nov2016 2/4

[HF] @ OZCJ Series -1206 Chip RoHS 6 Compliant & Halogen-Free Pad Layout PTC Marking The dimensions in the table below provide the ane recommended pad layout. b”, I code. [_ PartNumber [1H Code | w (> PDs) pw] [mm | inch | mm | Inch | mm | Inch| st Pies | ozcvooz0Fr2e | oF [ozcvooasrr2e |G | Termination Pad Materials [Kozboosseziaa| a | Matte Tin - Plated Copper |_ozcyoossar2e | j__ | Mechanical Dimensions Alldimensions inmm. — |ozCJ0050AF2E_| m | [art number _|—m-9ax ino Max | [lozcuoo7sFr2E | P| Dae Eero 04somy “azciooorree aus t-has--hie mes] | ozcJoorsarze |p | T [ozcJoo10FF2E | 0.45 | 085 | o10 | o7s | | OzcJoiooFF2e | 1 | | ozcvoo12Fr2e | 0.45 | 0.85 | 0.10 | 075 | | ozcuoi10rF2eE | RR | |_ozcuoozsarze | 0.45 | 0.75 | 0.10 | 0.75_| —— a— [TozcsooasFr2c | 0.30 0.76 | 0.10 [0.75 | {8.00-3.50mm) yoossaF2e | 0,90 | 1.30 | 025 | 075 | ena |[Tozcsoosorr2G | 0.25 | "0.55 | 0.10 | 0.75 | Top and Bottom View |“ozcsoosoaF2e |" 0.80 | 1.20 | 0.25 | 0.75 | Ea |[Tozcsoo7sFr2e | 0.45 | 1.25 [0.25 | 0.75 | Side View c [ozcvoro0FF2e | 0.45 | 1.00 | 0.25 | 0.75 | Thermal Derating Curve (“ozcsozoorF2c | 0.85 | 1.60 [0.25 | 0.75 | Cautionary Notes Hold & Trip Current and Thermal Derating Curve 1. Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. 300% 2. These Polymer PTC (PPTC) devices are intended for < protection against occasional overcurrent/ oS ome ‘overtemperature fault conditions and may not be = _ IT | suitable for use in applications where repeated and/or Sw e p d prote t. prolonged fault conditions are anticipated. SS 20m 1 _| 3. Avoid contact of PTC device with chemical solvent. BE | | Prolonged contact may adversely impact the PTC o5 di L, Laas performance. ZO ism eter p = 4, These PTC devices may not be suitable for use in Ss a circuits with a large inductance, as the PTC trip can = generate circuit voltage spikes above the PTC rated Se 100% voltage. 2 z as a 5. These devices are intended for use in DC voltage 4 applications only. Use in AC voltage applications oF 5% Devic . SSIs Leto should be first discussed with Bel Fuse engineering. 2 6. Not recommended for use on potted or conformal a coated PCB's. Restriction of free air flow could affect of electrical performance and/or result in device failure. “0 20 0 20 0 60 80 Consult Bel Fuse engineering. Ambient Temperature (‘C) 7. In the “Indeterminate Performance / grey zone”, tripping may occur but cannot be relied upon. For — — special circumstances considering use within this Hold Current Trip Current region, consult Bel Fuse Engineering. : 8. MSL : 2a (According to IPC J-Std-020). Specifications subject to change without notice as ee S POWER r(@ a Seo yEISNs & Bel Fuse Inc. +1 201.432.0463 es a 206 Van Vorst Street techhelp@belf.com ee abel group Jersey City, NU 07302 USA belfuse.com © 2016 Bel Fuse, Inc. 0ZCJ Nov2016 3/4

[HF] @ OZCJ Series -1206 Chip RoHS 6 Compliant & Halogen-Free Solder Reflow and Rework Recommendations tp ———— SSS Critical Zone] Profile Feature [Pb-Free Assemb| \\ikto Tp [Average Ramp-Up Rate (Tsmax to Tp) _| 3°C/second max ft [Ramp-up] Preheat : Ty jpeg Temperature Min (Tsmin) 150°C @ || [Tena Temperature Max (Tsmax) 200°C 2LLi ‘Time (tsmin to tsmax} 60-180 seconds rS Time maintained above: = fad Temperature(Ti) 217°C ae er \\<~- [Ramp down] Time 60-150 seconds e Peak/Classification Temperature(Tp) : Time within 5°C of actual Peak : {70-40 seconds —_| = Temperature (tp) 20-40 seconds 25°C to Peak Ramp-Down Rate : 6°C/second max. Time ——> Time 25°C to Peak Temperature : Solder Reflow Due to “lead free / RoHS 6" construction of these PTC devices , the required Temperature and Dwell Time in the “ Soldering ” zone of the reflow profile are greater than those used for non-RoHS devices. 1. Recommended reflow methods ; IR, vapor phase oven, hot air oven. 2. Not Recommended For Wave Solder / Direct Immersion. 3. Recommended paste thickness range — 0.20 - 0.25mm. 4. Devices are compatible with standard industry cleaning solvents and methods. 5. MSL : 2a (According to IPC J-Std-020). Caution If reflow temperature / dwell times exceed the recommended profile, the electrical performance of the PTC may be affected. Rework : MIL-STD-202G Method 210F, Test Condition A. Standard Packaging P/N Explanation and Ordering Information Tape/Reel Qty | 4000. 3000 or 2000 fuses OZCJ = OXXX_—-X_X_XK OZCJOOOSFF2E in 7 inches dia. Reel, —_— —— ee Thru 8mm wide tape, 4mm PTC series OZCJO025AF2E Pitch, per EIA-481 02,1206 Size OZCJOOSSAFZE | 3,000 _| 3). Rafer to Part Number and iH Rating in Electrical Characteristics Table on P. OZCJOOSOFF2G | 4,000 | Electrical Characteristics OZCJOOSOAF2E F = Standard Design Thru A to Z (except F) = Special, customer spec, DCR sort, etc. 02ZCJ011 0FF2E Mechanical Features 0ZCJ0150FF2C F = Standard Design Thru Ato Z (except F) = Special, customer spec, lead forming, etc. 0ZCJO200FF2C Tape & Reel Qty See standard packaging _ Specifications subject to change without notice ae. POWER EEC) ae 3 e SOLUTIONS & Bel Fuse Inc. +1 201.432.0463 ee ae 206 Van Vorst Street techhelp@belf.com ss abel group Jersey City, NJ 07302 USA belfuse.com © 2016 Bel Fuse, Inc. OZCJ Nov2016 4/4