0ACF_V01 BEL

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Features

-1500VDC maximum, High voltage and High Breaking Capacity - RoHS compliant with exemption 7(a) Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - AEC-Q Compliant - Meets Bel automotive qualification* * - Largely based on internal AEC -Q test plan Physical Specifications Electrical Characteristics Safety Agency Approvals Electrical Specifications Part Number Ampere Rating Voltage and Interrupting Ratings Typical Cold. Resistance (mohms) Typical Voltage Drop (mV) Typical Pre-Arcing I²t (A²S) Agency Approvals 0ACF-0800-XX 800mA See Table of Ratings on Page 1 for Voltage and associated Interrupting Ratings 560 500 0.65 0ACF-1000-XX 1A 435 480 1.30 Y 0ACF-2000-XX 2A 140 415 1.5 Y 0ACF-2500-XX 2.5A 106 385 2.5 Y 0ACF-3000-XX 3A 90 390 4.0 Y Consult manufacturer for other ratings DC Cold Resistance are measured at <10% of rated current in ambient temperature of 25 ℃ Typical Pre-arcing I²t are measured at 10In Current, DC battery bank . Materials Body : Ceramic Cap : Silver plated copper Marking On Fuse : "bel","0ACF-XXXX”(XXXX= Ampere Rating), "Voltage Rating", "Interrupting Rating" On Label : "bel", "0ACF”, "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). % of Ampere Rating (A) Operating Time Min Max 100% 4hours - 250% - 120sec Safety Agency Ampere Rating / Voltage Rating Ampere Range / Volt @ I.R. ability* 800mA / 1500V DC 800mA / 1000V DC 800mA/ 1500V @ 10kA DC 800mA / 1000V @ 10kA DC 1A-3A / 1000V DC 1A-3A / 1000V @ 10kA DC *I.R.=DC Interrupting Rating (measured at designated voltage, time constant of less than 50 microseconds) Specifications subject to change without notice AEC-Q Compliant

Bel Fuse Inc.

300 Executive Drive, Suite 300,

West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. Rev. 0ACF Aug2024 Temperature Re-Rating Curve Average Time Current Curve Normal Operating Temperature: 25 ℃ Operating Temperature: -40℃ to 105℃ with proper correction factor applied. Soldering Characteristics Reflow Soldering Condition: Manual Soldering :

  • Temperature: 350° C
  • Time: 5 Seconds Maximum Profile Feature Lead(Pb) free solder Preheat and soak Temperature min.(Tsmin ) 150℃ Temperature max. (Tsmax ) 200℃ Time (Tsmin to Tsmax ) (tS) 60 - 120 Seconds Average ramp up rate Tsmax to Tp 3℃ / Second Max. Liquidous temperature (TL) Time at liquidous (tL) 217℃ 60 - 90 Seconds Peak package body temperature (TP) 260+0/-5℃ Time (tP) within 5℃ of the specified classification temperature (TC) 20-40 Seconds Average ramp-down rate (TP to Tsmax ) 6℃ / Second Max. Time (25℃ to Peak Temperature) 8 Minutes Max. Specifications subject to change without notice 0.4 0.5 0.6 0.7 0.8 0.9 1.1 1.2 1.3 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 Factor of Rated Current Ambient Temperature °C 0.001 0.01 0.1 100 1000 0.1 1 10 100 Time (Seconds) Current (Amperes) Time Current Curve 800mA 2.5A

Bel Fuse Inc. West Orange, NJ 07052 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2024 Bel Fuse, Inc. Rev. 0ACF Aug2024 Fuse FGNO Explanation 0ACF - [XXXX] -XX 0ACF=0ACF; [XXXX]=Ampere Rating; XX=See Ordering Information as below Fraction Decimal Milliamps Bel FGNO[XXXX] Decimal Amps Bel FGNO[XXXX] 8/10 0.800 800 0800 1.0 1 1000 2.0 2 2000 2.5 2.5 2500 3.0 3 3000 Mechanical Dimensions Ordering Information Packaging Packaging Option Quantity Packaging Code Tape (width 44mm) and reel (dia. 13inch) 500 TE Specifications subject to change without notice 0ACF - XXXX – XX FUSE TYPE 0ACF = 0ACF AMPERE RATING Refer to fuse FGNO explanation table PACKAGING & QUANTITY CODE TE= 500pcs fuses in tape (width 44mm) and reel (dia. 13inch)