0ACA BEL
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
Features
- Surface mount design to save space , 2410 SMD - Ceramic square body with Silver plated end cap - Compatible with 260℃, IR Pb-free solder process - Wide operating temperature range, -55℃ to 125℃ - Tape & Reel for auto-insert SMD process - Designed to UL248-1 - Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 - Full compatible with lead-free solder and high temperature profile associated with lead-free assembly - pass internal reliability performance and applicable for low duty application (bicycle etc.) HALOGEN FREE = LEAD FREE =
Applications
- E-Bike - e Robot sweeper - E-Motor - Power Tools Physical Specifications Electrical Characteristics Safety Agency Approvals Materials Body : Ceramic Cap : Silver plated copper Marking On Fuse : "Current Rating" On Label : "bel", "0ACA”, "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). % of Ampere Rating (A) Operating Time Min Max 100% 4hours - 200% - 60sec Safety Agency Ampere Rating / Voltage Rating Ampere Range / Volt @ I.R. ability* 20-30A / 72V DC 40A / 63V DC 20-30A / 72V @ 500A DC 40A / 63V @ 500A DC *I.R.=DC Interrupting Rating Specifications subject to change without notice
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2023 Bel Fuse, Inc. Rev. 0ACA Apr2023 Temperature Re-Rating Curve Average Time Current Curve Normal Operating Temperature: 25℃± 2℃ Operating Temperature: -55℃ to 125℃ with proper correction factor applied. Chart of correction factor Storage Temperature: -55℃ to 125℃ Electrical Specifications Part Number Ampere Rating Voltage and Interrupting Ratings Typical Cold. Resistance (mohms) Typical Voltage Drop (mV) Typical Pre-Arcing I²t (A²Sec) 0ACA-9200-XX 20A See Table of Ratings on Page 1 for Voltage and associated Interrupting Ratings 2.3 60 210 0ACA-9250-XX 25A 1.7 55 400 0ACA-9300-XX 30A 1.2 50 900 0ACA-9400-XX 40A 0.9 50 1600 Consult manufacturer for other ratings Typical Pre-arcing I2t are measured at 10In Current. Specifications subject to change without notice 0.001 0.01 0.1 100 1000 10000 10 100 1000 Time (Second) Current (Amperes) Time Current Curve 20A 25A 30A 40A
Bel Fuse Inc. Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2023 Bel Fuse, Inc. Rev. 0ACA Apr2023 Soldering Characteristics Wave Immersion
- Reservoir Temperature: 260° C
- Time in Reservoir : 10 Seconds Maximum Infrared Reflow
- Temperature: 260° C
- Time: 30 Seconds Maximum Hand Soldering (not recommended)
- Maximum tip temperature: 350° C
- Maximum soldering time: 5 seconds max Profile Feature Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) 150℃ 200℃ 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3℃/second max. Liquidous temperature (TL) Time at liquidous (tL) 217℃ 60-150 seconds Peak package body temperature (Tp) 260℃ Time (tp) within 5℃ of the specified classification temperature (Tc) 30 seconds Average ramp-down rate (Tp to Tsmax) 6℃/second max. Time 25℃ to peak temperature 8 minutes max. Specifications subject to change without notice
Bel Fuse Inc. Jersey City, NJ 07302 USA +1 201.432.0463 Bel.US.CS@belf.com belfuse.com/circuit-protection © 2023 Bel Fuse, Inc. Rev. 0ACA Apr2023 Fuse FGNO Explanation 0ACA - [XXXX] -XX 0ACA=0ACA; [XXXX]=Ampere Rating; XX=See Ordering Information as below Decimal Amps Bel FGNO[XXXX] 20 20 9200 25 25 9250 30 30 9300 40 40 9400 Mechanical Dimensions Ordering Information Packaging Packaging Option Quantity Packaging Code Tape (width 12mm) and reel (dia. 7inch) 1000 TE Specifications subject to change without notice