08S121-2W7S3 ROSENBERGER

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

RPC61.85 STRAIGHT PLUG 08S121-2W7S3 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 1860 Page P.O.Box 1260 D684526 Tittmoning Germany Fa x: +49 8684 186499 www.rosenberger.de email: info@rosenberger.de 1 / 2 RF_35/12.04/3.0 All dimensions are in mm; tolerances according to ISO 2768 m6H Interface According to IEC 61169632 Mechanically compatible with RPC62.40 Documents Assembly instruction 02 A3 Material and plating Connector parts Material Plating Center contact Beryllium copper Gold, min. 1.27 µm , over chemical nickel Outer contact Stainless steel Passivated Coupling nut Stainless steel Passivated Dielectric PEEK Solder sleeve Brass Gold, 0.1 µm min.

RPC61.85 STRAIGHT PLUG 08S121-2W7S3 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 1860 Page P.O.Box 1260 D684526 Tittmoning Germany Fa x: +49 8684 186499 www.rosenberger.de email: info@rosenberger.de 2 / 2 RF_35/12.04/3.0 f(GHz) Electrical data Impedance 50 Ω Frequency DC to 70 GHz Return loss ≥ 20 dB, DC to 70 GHz Insertion loss ≤ 0.05 x dB Insulation resistance ≥ 5 G Ω Center contact resistance ≤ 4.0 m Ω Outer contact resistance ≤ 2.5 m Ω Test voltage 500 V rms Working voltage 150 V rms RF6leakage ≥ 100 dB up to 1 GHz

6 Limitations are possible due to the used cable type 6

Mating cycles ≥ 500 Center contact captivation ≥ 20 N Coupling test torque 1.65 Nm Recommended torque 0.80 Nm to 1.10 Nm Environmental data Temperature range 640°C to +85°C Thermal shock IEC 6116961, Subclause 9.4.4 Corrosion IEC 6116961, Subclause 9.4.6 Vibration IEC 6116961, Subclause 9.3.3 Shock IEC 6116961, Subclause 9.3.14 Moisture resistance IEC 6116961, Subclause 9.4.3 2002/95/EC (RoHS) compliant Tooling N/A Suitable cables UT 706LL Packing Standard 1 pce in bag Weight 11.0 g/pce Draft Date Approved Date Rev. Engineering change n umber Name Date Herbert Babinger 20/10/06 Armin Maiwälder 26/09/11 b00 11-0780 Georg Schiele 26/09/11 While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the e ffort to improve our products, we reserve the right to make changes judged to be necessary.