0811-1X1T-12 BEL
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 page 1 BM0182110Base-T belMag™ INTEGRATED CONNECTOR MODULES ELECTRICAL SPECIFICATIONS AT 25° C SCHEMATIC 0811-1X1T-12 rebmuNtraP ssoLnoitresnI xamBd ssoLnruteR nimBd nommoCotnommoC noitcejeRedoM nimBd klatssorC nimBd LCO nimHµ zHM01otzHM1 zHM01otzHM1 zHM03otzHM01 zHM01otzHM1 21-T1X1-11800 .1-5 1-0 4-0 4-0 02 22-T1X1-11800 .1-5 1-0 4-0 4-0 02 RJ45 TCT 1 TD+ TD - R D+ R D - R CT Shield 1CT : 1.41 1CT : 1 TX+ TX- R X+ R X- 0811-1X1T-22 PIN 6RCT R D- R D + TD- TD + TCT R J-45
1 TX+
3 R X+
1CT : 2 1CT : 1
- Shielded connector with integrated 10Base-T magnetics
- Compatible with a variety of 10Base-T transceiver ICs
- Operating temperature 0° to +70° C
- Storage temperature -40° to +85° C
- Reduced pin count for improved crosstalk and optimum PCB trace routing
- Complies with IEEE 802.3 standards and all 10Base-T Ethernet standards
- Integrated design conserves valuable board space
- Minimum interwinding breakdown voltage of 1500 Vrms
- Adaptable, modular design provides higher reliability Available Options
- Various transformer turns ratios
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com ©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01 BM01821 page 2 10Base-T belMag™ INTEGRATED CONNECTOR MODULES Suggested PCB Pad Layout Component Side View 0.068 [1.71] 0.565 [14.35] 0.440 [11.18] 0.050 [1.27] 0.080 [2.03] Ø 0.062 [Ø 1.57] 2 places Ø 0.128 [Ø 3.25] 2 places Ø 0.035 [Ø 0.89] 6 places 1 2 3 45 6 0.635 [16.13] 0.500 [12.70] MECHANICAL 0811-1X1T-12 0811-1X1T-22 Notes Plastic Housing Thermoplastic, flammability rating UL 94V-0 Contacts 50 micro-inch hard gold plating Pins Tin-coated copper wire, DIA 0.018" [0.46] Solderability Per MIL Std. 202, Method 208 Metal Shield Tin lead plated copper alloy PAD LAYOUT 0.755 ±0.020 [19.18 ±0.51] 0.130 [3.30] 0.531 [13.49] 1.005 [25.53] max 0.305 [7.75] 0.125 [3.18] 0.565 [14.35] 0.125 [3.18] Dim ensions are in inches [m illim eters]. Standard dim ension tolerance is ±0.010 [0.25] unless otherwise noted. 0.661 [16.79] max 0.570 ±0.010 [14.48 ±0.25] 0.250 [6.35] 0.190 [4.83] Pin 1 0.546 [13.87] 0.681 [17.30] PCB Metal Panel 0.080 [2.03] Suggested Panel Op ening