DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 9

Technical content

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection with tension sleeve, number of positions: 1, load current: 101 A, cross section: 6 mm2 - 35 mm2, connection direction of the conductor to plug-in direction: -90 °, width: 15.1 mm, color: green-yellow Your advantages Well-known connection principle allows worldwide use• Low temperature rise, thanks to maximum contact force Tool-free snap-in principle enables easy mounting on the device panel Automatic panel thickness compensation enables universal use Commercial Data Item number 0709042 Packing unit 1 pc Minimum order quantity 25 pc Sales Key A02 Product Key AA1EAD GTIN 4017918004903 Weight per Piece (including packing) 69.55 g Weight per Piece (excluding packing) 69.55 g Customs tariff number 85369010 Country of origin GR Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 1 (9)

Product type Panel feed-through terminal block Number of positions 1 Pitch 15.1 mm Number of connections 2 Number of rows 1 Number of potentials 1 Insulation characteristics Overvoltage category III Degree of pollution 3 Electrical properties Nominal current IN 101 A Nominal voltage UN 500 V Pollution degree 3 Rated voltage (III/3) 500 V Rated surge voltage (III/3) 6 kV Connection data Connection technology Connector system HDFK 25 Nominal cross section 25 mm² Conductor connection exterior Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction -90 ° Conductor cross section solid 6 mm² ... 35 mm² Conductor cross section flexible 10 mm² ... 25 mm² Conductor cross section flexible, with ferrule without plastic sleeve 4 mm² ... 25 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 4 mm² ... 25 mm² 2 conductors with same cross section, solid 2.5 mm² ... 10 mm² 2 conductors with same cross section, flexible 4 mm² ... 10 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 2.5 mm² ... 10 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 2.5 mm² ... 10 mm² Internal cylindrical gage B8 Conductor connection interior Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction -90 ° Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 2 (9)

Conductor cross section solid 6 mm² ... 35 mm² Conductor cross section flexible 10 mm² ... 25 mm² Conductor cross section flexible, with ferrule without plastic sleeve 4 mm² ... 25 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve 4 mm² ... 25 mm² 2 conductors with same cross section, solid 2.5 mm² ... 10 mm² 2 conductors with same cross section, flexible 4 mm² ... 10 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 2.5 mm² ... 10 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 2.5 mm² ... 10 mm² Internal cylindrical gage B8 Mounting Plate thickness 1 mm ... 6 mm Material specifications Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material Cu alloy Surface characteristics tin-plated Material data - housing Housing color green-yellow (6021 / 1018) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2- 775 Temperature for the ball pressure test according to EN 60695- 10-2 125 °C Notes Safety note

  • Only electrically qualified personnel may install and operate the product. To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
  • Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
  • The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. Safety note Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 3 (9)

There is no electrical contact to the housing. Make sure that protective grounding is provided for green/yellow color variants and articles marked with PE. Dimensions Dimensional drawing Pitch 15.1 mm Width [w] 15.1 mm Height [h] 53.6 mm External dimensions Width [w] 15.1 mm Height [h1] 53.6 mm Length [l1] 44.5 mm Internal dimensions Width [w] 15.1 mm Height [h2] 45 mm Length [l2] 30 mm Electrical tests Air clearances and creepage distances | 1. Insulation coordination Insulating material group I Comparative tracking index (IEC 60112) CTI 600 Rated insulation voltage (III/3) 500 V Rated surge voltage (III/3) 6 kV minimum clearance value - non-homogenous field (III/3) 5.5 mm minimum creepage distance (III/3) 6.3 mm Packaging specifications Type of packaging packed in cardboard Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 4 (9)

4,3 15,1 13,7 Dimensional drawing 55,953,6 44,5 30 1-6 Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 5 (9)

 CSA Approval ID: 13631 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 Use group B

600 V 100 A 8 - 2 -

 UL Recognized Approval ID: E60425-19890329 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2 Use group B

600 V 115 A 8 - 2 -

 EAC Approval ID: B.01687 Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 6 (9)

ECLASS-10.0.1 27141134 ECLASS-9.0 27141134 ECLASS-11.0 27141134 ETIM ETIM 8.0 EC001283 UNSPSC UNSPSC 21.0 39121400 Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 7 (9)

Environmental Product Compliance Environmentally friendly use period: unlimited = EFUP-eChina RoHS No hazardous substances above threshold values Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 8 (9)

Screwdriver - SZS 1,0X6,5 VDE - 1205079 https://www.phoenixcontact.com/us/products/1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip Phoenix Contact 2022 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Panel feed-through terminal block - HDFKV 25 GNYE 0709042 https://www.phoenixcontact.com/us/products/0709042 Jul 29, 2022, 6:05 AM Page 9 (9)