DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

Applications

  • RoHS compliant, lead-free and halogen free
  • Fast response to fault currents
  • Compact design saves board space
  • Low resistance
  • Low-profile
  • Compatible with high temperature solders
  • USB peripherals
  • Disk drives
  • CD-ROMs
  • Plug and play protection for motherboards and peripherals
  • PDAs / digital cameras
  • Game console port protection Agency Approvals

Electrical Characteristics

Part Number Marking I hold (A) I trip (A) V max (Vdc) I max (A) P d typ. (W) Maximum Time To Trip Resistance Agency Approvals Current (A) Time (Sec.) R min (Ω) R 1max (Ω) I hold = Hold current: maximum current device will pass without tripping in 20°C still air. I trip = Trip current: minimum current at which the device will trip in 20°C still air. V max = Maximum voltage device can withstand without damage at rated current (I max) I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) P d = Power dissipated from device when in the tripped state at 20°C still air. R min = Minimum resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. WARNING

  • Users shall independently assess the suitability of these devices for each of their applications
  • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
  • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration
  • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
  • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
  • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. AGENCY AGENCY FILE NUMBER E183209 R50119118 Additional Information Datasheet SamplesResources Samples

© 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/05/15 Surface Mount > 0603L Series T emperature Rerating T emperature Rerating Curve -40 -30 -20 -100 10 20 30 40 50 60 70 80 10% 30% 50% 70% 90% 110% 130% 150% 170% Temperature (°C) Percentage of Rated Current Average Time Current Curves The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. Note: Typical Temperature rerating curve, refer to table for derating data Ambient Operation Temperature -40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C Part Number Hold Current (A) 0.01 0.1 100 1000 10000 100000 0.1 11 0 100 Time in Seconds Current in Amperes 0.01 0.1 100 1000 10000 100000 0.1 11 01 00 Current in Amperes Time in Seconds 0.01 0.1 100 1000 10000 100000 0.1 11 0 100 Current in Amperes Time in Seconds 1812L 0603L 250S 0805L OLD 1206L OLD 0.01 0.1 100 0.1 11 0 100 Current in Amperes Time in Seconds 0.01 0.1 100 1000 10000 100000 0.1 11 0 100 Current in Amperes Time in Seconds 0.04A 0.10A 0.20A 0.25A 0.35A 0.50A 0.10 100 1000 0.1 11 01 00 Current in Amperes Time in Seconds 0.13A 0.10A 0.20A 0.35A 0.50A 0.75A 1.00A 0.12A 0.16A 0.20A 0.25A 0.35A 0.35A/15V 0.50A 0.50A/15V 0.75A 1.0A 1.1A 1.5A 2.0A 0.10A 0.14A 0.20A 0.50A 0.75A/33V 0.75A/24V 0.75A 1.10A/16V 1.10A/33V 1.10A 1.25A 1.25A/6V 1.50A/12V 1.50A 1.50A/24V 1.60A/12V 1.60A 1.60A/8V 2.00A 2.60A 2920L 0.01 0.1 100 0.1 11 0 100 Current in Amperes Time in Seconds 0.16A 0.30A 1.00A/33v 1.00A 1.50A 2.00A 0.30A 0.50A 0.75A & 0.75A/60 1.00A 1.25A 1.50A 1.85A 2.00A/24V 2.50A 2.60A & 2.60A/24 3.00A/15V 5.00A/16V 0.01 0.1 100 1000 10000 100000 0.11 10 100 Current in Amperes Time in Seconds 2920L 0.10A 0.30A 0.50A .75A .75A/60 1.00A 1.25A 1.50A 1.85A 2.00A/24V 2.00A 2.50A 2.60A 3.00A/15V 3.00A 2016L OLD 0.01 0.1 100 1000 10000 0.1 11 01 00 Current in Amperes Time in Seconds 1210L OLD 0.05A 0.10A 0.20A 0.35A 0.50A 0.75A 1.10A 1.50A 1.75A 2.00A 0.01 0.10 1.00 10.00 100.00 0.101 .001 0.00 Time in Seconds Current in Amperes 1210L 0.05A 0.10A 0.20A 0.35A 0.50A 0.75A 0.75A/24 1.10A 1.50A 1.75A 2.00A 0.01 0.1 100 0.1 11 0 Time in Seconds Current in Amperes 2016L 0.30A 0.50A 0.75A/60 1.00A 1.00A/33 1.50A 2.00A 0.01 0.1 100 0.1 11 0 Time in Seconds Current in Amperes 1206L 0.12A 0.16A 0.20A 0.25A 0.35A, 0.35A/15V 0.50A, 0.50A/15V 0.75A 0.75A/13.2V 1.1A 1.5A 1.75A 2.0A 0805L 0.01 0.1 100 0.1 11 0 100 Current in Amperes Time in Seconds 0.10A 0.20A 0.35A 0.50A 0.75A 1.00A 1.10A

© 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/05/15 Surface Mount > 0603L Series Environmental Specifications Operating/Storage T emperature -40°C to +85°C Maximum Device Surface T emperature in T ripped State125°C Passive Aging +85°C, 1000 hours -/+10% typical resistance change Humidity Aging +85°C, 85% R.H.,100 hours -/+15% typical resistance change Thermal Shock MIL–STD–202, Method 107 +85°C/-40°C 20 times -30% typical resistance change Solvent Resistance MIL–STD–202, Method 215 No change Vibration MIL–STD–883, Method 2007 , Condition A No change Moisture Sensitivity Level Level 1, J–STD–020 Physical Specifications T erminal Material Solder-Plated Copper (Solder Material: Matte Tin (Sn)) Lead Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002, Category 3. Soldering Parameters Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone tL to tP Profile Feature Pb-Free Assembly Average Ramp-Up Rate (TS(max) to TP) 3°C/second max Pre Heat: Temperature Min (Ts(min)) 150°C Temperature Max (Ts(max)) 200°C Time (Min to Max) (ts) 60 – 180 secs Time Maintained Above: Temperature (TL) 217°C Temperature (tL) 60 – 150 seconds Peak / Classification Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. -- All temperature refer to topside of the package, measured on the package body surface -- If reflow temperature exceeds the recommended profile, devices may not meet the performance requirements -- Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead -- Recommended maximum paste thickness is 0.25mm (0.010 inch) -- Devices can be cleaned using standard industry methods and solvents -- Devices can be reworked using the standard industry practices

© 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/05/15 Surface Mount > 0603L Series Part Ordering Number System PACKAGING STYLE L: LITTELFUSE SURFACE MOUNT PPTC QUANTITY CODE R: Tape & Reel Y: 4000

0603 L xxx Y R - A

DEVICE SIZE CODE (0.06 x 0.03 inch) I HOLD HOLD CURRENT CODE (Refer to Electrical Characteristics Table) -A: Automotive grade Blank: Standard version Packaging Dimensions Part Number A B C D E Inch mm Inch mm Inch mm Inch mm Inch mm Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max C Top View Pad Layout Side View Bottom View 1mm (.039”) 0.8mm (.032”) D Marking code v aries with amperage rating -- See Electrical Characteristics t able E A B 1mm (.039”) 1mm (.039”) Solder Pad Layout Part Number Ordering Number Halogen Free I hold (A) I hold Code Packaging Option Quantity Quantity & Packaging Codes 0603L004 0603L004YR Ye s 0.04 004 Tape and Reel 4000 YR 0603L010 0603L010YR Ye s 0.10 010 Tape and Reel 4000 YR 0603L020 0603L020YR Ye s 0.20 020 Tape and Reel 4000 YR 0603L025 0603L025YR Ye s 0.25 025 Tape and Reel 4000 YR 0603L035 0603L035YR Ye s 0.35 035 Tape and Reel 4000 YR 0603L050 0603L050YR Ye s 0.50 050 Tape and Reel 4000 YR

© 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/05/15 Surface Mount > 0603L Series TAPE SPECIFICATIONS: EIA-481-1 (mm) REEL DIMENSIONS: EIA-481-1 (mm) 0603L004 0603L010 0603L020 0603L025 0603L035 0603L050 Leader min. 390 390 T railer min. 160 160 W CD H K0 B0D1 T F W E1P2 P0P1 Tape Specifications Reel Specifications T ape and Reel Specifications T ape and Reel Diagram