05S101-K150 ROSENBERGER
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
50 Ω Airline Plug / Jack 05S101-K150 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 61169-16 Documents Material and plating Connector parts Material Plating Center conductor CuBe Gold, min. 1.27 µm, over chem ical nickel Outer conductor Brass Gold, min. 1.27 µm, over chem ical nickel Coupling nut Stainless steel Passivated
50 Ω Airline Plug / Jack 05S101-K150 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Electrical data Insertion loss ≤ 0.25 dB at 18 GHz Mechanical data Mating cycles ≥ 500 Maximum torque 1.70 Nm Recommended torque 1.10 Nm Airline dimensions at 23 °C: - Diameter outer conductor 7.000 mm ± 0.005 mm - Diameter inner conductor 3.040 mm ± 0.005 mm - Length outer conductor 150.00 mm + 0.02 mm - Length inner conductor 150.00 mm - 0.02 mm - Length difference ≤ 0.04 mm (outer conductor – inner conductor) Calculated data (non warranted) Lossless characteristic impedance 1 50 Ω ± 0.15 Ω Return loss 2 ≥ 40 dB, 0.3 GHz to 4 GHz ≥ 38 dB, 4 GHz to 8 GHz ≥ 35 dB, 8 GHz to 18 GHz 1. The lossless characteristic impedance is calculated from the specified diameters of the inner and outer conductor. 2. The return loss is calculated from the characteristic impedance, the skin depth and the connector interface. General standard definitions For proper work the vector network analyzer (VNA) used needs a model describing the electrical behaviour of this calibration standard. Depending on the VNA type different models, units and terms are used and have to be entered into the VNA. All values are based on typical geometry and plating. - Offset Z o / Impedance / Z o 50 Ω - Offset Delay 500.542 ps - Length (electrical) / Offset Length 150.059 mm - Offset Loss 0.80 G Ω/s - Loss 0.035 dB/ GHz Environmental data Operating temperature range 3 +20 °C to +26 °C Storage temperature range 0 °C to +50 °C RoHS compliant 3. This range is a recommendation. However, the airline can be used in a wider range. Any temperature change from 23 °C results in dimensional changes.
50 Ω Airline Plug / Jack 05S101-K150 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Declaration of calibration options Factory Calibration Standard delivery for this calibration standard includes a Factory Calibration. The Calibration Certificate issued reports individual mechanical calibration results, traceable to national / international standards. Model based standard definitions are reported in an Agilent/Keysight, Rohde & Schwarz and Anritsu compatible VNA format. Accredited Calibration Not available. For further, more detailed information see application note AN001 on the Rosenberger homepage. Calibration interval Recommendation 12 months Packing Standard 1 pce in box Weight 130 g/pce Center conductor loose in an acrylic glass tube Draft Date Approved Date Rev. Engineering change n umber Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.