03460877H_V01 LITTELFUSE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 1
Technical content
Features
- Shock-Safe design eliminates any possibility of electrical shock, per IEC Standards IEC 60127-6.
- Fuse carrier holds spare fuse for fast, easy fuse replacement and convenient servicing.
- Low profile design Electrical Rating: See ordering information table. Insulation Resistance:10,000 megohm minimum at 500 VDC. Contact Resistance: Less than 0.01 ohm. Mounting Snap-in mounting. No hardware required. Panel thickness range: .032” through .125” . Molded Parts Thermoplastic (UL94 V-0) black standard (other colors available as special). Fuse Carrier Spring-loaded. Unlocks with a press of the finger. Locks into place to prevent accidental circuit interruption. Permanently attached to fuseholder body to prevent loss. Extracts fuse from live terminals. Holds spare fuse. T erminals Copper alloy, tin plate. Accepts quick-connect or solder. Ambient T emperature –40 ºC to +85 ºC. Vibration 10-55-10 Hz at .06” double amplitude (Method 201, MIL -STD-202). B F DC A E Recomended Mounting Hole Dimensions Refer to Fuseology for information on proper fuseholder re-rating. Additional Information Datasheet SamplesResources Datasheet SamplesResources
286 Series
346 Series
Application testing is strongly recommended. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. B F DC A E Recomended Mounting Hole B F DC A E Recomended Mounting Hole