0219.040MXAEP LITTELFUSE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Features

Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time 150% 40mA – 100mA 1 hours, Minimum 125mA – 6.3A 1 hours, Minimum 210% 40mA – 100mA 2 minutes, Maximum 125mA – 6.3A 2 minutes, Maximum 275% 40mA – 100mA 0.2 sec., Min; 10 sec. Max 125mA – 6.3A 0.6 sec., Min; 10 sec. Max 400% 40mA – 100mA 0.04 sec., Min; 3 sec. Max 125mA – 6.3A .15 sec., Min; 3 sec. Max 1000% 40mA – 100mA .01 sec., Min; 0.3 sec. Max ApplicationsAgency Agency File Number Ampere Range Cartridge Certifications: NBK220604-E10480A NBK230604-E10480A Leaded Certifications: NBK220604-E10480B NBK230604-E10480B 1A – 5A 6.3A 1A – 5A 6.3A Certifications: 2004010207110266 2003010207079982 125mA – 800mA 1A – 6.3A Recognised File: E10480 Guide: JDYX2 40mA – 6.3A File and Acc. Class: 029862_0_000 125mA – 6.3A File: 402708 310144 40mA – 100mA 125mA – 800mA 1A – 6.3A License: 40016080 125mA – 6.3A 40mA – 6.3A UÊ International (IEC ) Standards for use globally UÊ iiÌÃÊÌ iÊ Ê 60127-2, Sheet 6 specification for time- Lag fuses and axial lead form lead-free 5x20mm time-Lag glass body cartridge fuse designed to IEC specification Used as supplementary protection in appliance or components or internal circuits. 219XA Series, 5x20mm, Time-Lag (Slo-Blo®) Fuse

Description

Revised: February 3, 2012

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 278 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 219XA Series 5×20 mm > Time-Lag > 219XA Series Please refer to www.littelfuse.com/series/219XA.html for current information. Amp Code Amp Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Nominal Voltage Drop at Rated Current (mV) Nominal Power Dissipation at Rated Current (W) Agency Approvals PS E .040 0.040 250 150A @ 250VAC 31.8620 0.01100 4000 1.6 xxx Electrical Characteristic Specifications by Item I{‡È°ÎÊ

279© 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 219XA Series 5×20 mm > Time-Lag > 219XA Series Please refer to www.littelfuse.com/series/219XA.html for current information. 219XA Series Average Time Current Curves 0.001 0.01 000100101110.0 0.1 100 1000 10000 TIME IN SECONDS CURRENT IN AMPERES 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.25A 1.6A 2.5A 3.15A 6.3A Temperature Rerating Curve Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: ÊÊÊÊ*Ài i>ÌÊ/ˆ“i\\ 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: ʳɇÊxc Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters:

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology 280 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 219XA Series 5×20 mm > Time-Lag > 219XA Series Please refer to www.littelfuse.com/series/219XA.html for current information. Product Characteristics Materials Body: Glass Cap: Nickel Plated Brass œ««iÀ Terminal Strength ‡-/ ‡ÓäÓ]ÊiÌ œ\ÊÓ££° /iÃÌÊ Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Product Marking rating />«iÉ,iiÊ­, Operating Temperature qxx¨ Ê̜ʳ£Óx¨ Shock ‡-/ ‡ÓäÓ]ÊiÌ œ\Ê£äÇ]Ê/iÃÌÊ Condition B: (5 cycles –65OC to ³£ÓxOC) Vibration ‡-/ ‡ÓäÓ]ÊiÌ œ\ÊÓä£ Humidity ‡-/ ‡ÓäÓ]ÊiÌ œ\Ê£äÎ ]Ê/iÃÌÊ O C) for 240 hours. Salt Spray ‡-/ ‡ÓäÓÊiÌ œ\Ê£ä£ ]Ê/iÃÌÊ Condition B Dimensions 0219 000XAP 20+0.5 5.1+0.6 5.2+0.1 -0.2 5.1+0.6 0219000XAEP 0.65* 40 22.5 MAX 5.8 MAX All dimensions in mm Notes: * Ratings above 6.3A have 0.8 mm dia lead Packaging Part Numbering System 0219 xxxx M XA E P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Lead-free Quantity Code M = 1000 Option Codes Blank : Cartidge Type Fuse E : Axial Leaded Fuse Packaging Code X = Filler A = Enhanced l sq t Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width 219XA Series Bulk N/A 1000 MXA N/A Bulk N/A 1000 MXAE N/A ,iiÊ>˜\Ê/>«i EIA 296-E 1000 , Bulk N/A 1000 MXG N/A