DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Features

t %FTJHOFEUP International (IEC ) St andards for use globally t .FFUTUIF*&$ 4IFFU specification for Time- Lag fuses t "WBJMBCMFJODBSUSJEHF and axial lead form t 3P)4DPNQMJBOUBOE lead-free

Applications

"QQSPWBMGPS$BSUSJEHFWFSTJPOTPOMZ

Electrical Characteristics

5x20mm Time-Lag glass body cartridge fuse designed to IEC specification. Used as supplement ary protection in appliance or VUJMJ[BUJPOFRVJQNFOUUPQSPWJEFJOEJWJEVBMQSPUFDUJPOGPS components or internal circuits.

218 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse

E % of Ampere Rating Ampere Rating Opening Time 150% 32mA–1 00mA 60 minutes, Minimum 125mA-6.3A 60 minutes, Minimum 8A-15A 30 minutes, Minimum 210% 32mA-100mA 120 sec., Maximum 125mA-6.3A 120 sec., Maximum 8A-15A 120 sec., Maximum 275% 32mA-100mA 200 ms., Min.; 10 sec. Max. 8A-15A 600 ms., Min.; 10 sec. Max. 400% 32mA-100mA 40 ms., Min.; 3 sec. Max. 8A-15A 150 ms., Min.; 3 sec. Max. 1000% 32mA-100mA 10 ms., Min.; 300 ms. Max. 8A-15A 20 ms., Min.; 300 ms. Max.

Description

Revised: April 23, 2012

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology © 2012 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses

218 Series

5×20 mm > Time-Lag > 218 Series Please refer to www.littelfuse.com/series/218.html for current information. Amp Code Amp Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Nominal Voltage Drop at Rated Current (mV) Nominal Power Dissipation At Rated Current (W) Agency Approvals PS E .032 0.032 250

35 A @ 250 VAC

48.2580 0.01100 5000 1 .6 x x xxxxx 001 . 1 250 0.0613 6.730 150 1 .6 xxxxxxxxx 002. 2 250 0.0293 14.450 150 1 .6 xxxxxxxxx 004. 4 250 40 A @ 250 VAC 0.0129 69.10 100 1 .6 xxxxxxxxx 005. 5 250 50 A @ 250 VAC 0 . 0 1 0 4 1 1 1 . 0 0 1 0 0 1 . 6 xxxxxxxxx 008. 8 250 80 A @ 250 VAC 0.0059 341 .50 100 4 x x x x x x 010. 10 250 100 A @ 250 VAC 0.0045 568.00 100 4 x xxx xx 12.5 12.5 250 63 A @ 250 VAC 0.0034 889.00 100 4 x x x 015. 15 250 100 A @ 250 VAC 0.0028 1405.00 100 4 x x x x x* 016. 16 250 63 A @ 250 VAC 0.0021 1955.00 100 4 x x Average Time Current CurvesT emperature Rerating Curve "QQSPWBMGPSDBSUJEHFWFSTJPOTPOMZ 0.01 0.1 100 1000 10000 0.01 0.1 1 10 100 TIME IN SECONDS CURRENT IN AMPERES 0.032A 0.040A 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.25A 1.6A 2.5A 3.15A 6.3A 10A 12.5A 15A 16A

© 2012 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Please refer to www.littelfuse.com/series/218.html for current information. Operating Temperature –55ºC to +125ºC Thermal Shock .*-45%( .FUIPE( 5FTU Condition B (5 cycles, –65°C to +125°C) Vibration .*-45%( .FUIPE" Humidity .*-45%( .FUIPE# 5FTU $POEJUJPO" )JHI3) BOE FMFWBUFEUFNQFSBUVSF °C) for 240 IPVST Salt Spray .*-45%( .FUIPE% 5FTU Condition B Material Body: Glass Cap: Nickel–plated Brass Leads: Tin–plated Copper Terminal Strength .*-45%( .FUIPE" 5FTU Condition A Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Product Marking Cap1: Brand logo, current and WPMUBHFSBUJOHT Cap2:"HFODZBQQSPWBMNBSLT Packaging "WBJMBCMFJO#VML . QDTQLH PSPO5BQF3FFM .3&5 QDT reel) Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: %FQFOETPO'MVY"DUJWBUJPO5FNQFSBUVSF (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C 1SFIFBU5JNF 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 4PMEFS*SPO5FNQFSBUVSF¡$ )FBUJOH5JNFTFDPOETNBY Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters:

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology © 2012 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Please refer to www.littelfuse.com/series/218.html for current information. Dimensions Packaging 0218 000P 20+0.5 5.1+0.6 5.2+0.1 -0.2 5.1+0.6 40 22.5 MAX 5.8 MAX 0218016. XEP

0218.125 XEP

0218.100XEP

0218.032 XEP

0.65 0.65* 40 22.5 MAX 6.0 MAX All dimensions in mm Notes: * Ratings above 6.3A have 0.8 mm dia lead Part Numbering System 0218 xxxx M X E P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Lead-free Quantity Code M = 1000 Option Codes Blank : Cartidge Type Fuse E : Axial Lead Fuse Packaging Code X = Filler Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width " 1000 MX /" Bulk /" 1000 MXE /" Reel and Tape EIA 296-E 1000 MRET1 5 NN w Bulk /" 1000 MXG /" Bulk /" 1000 MXB /" Bulk /" 100 )9 /"