DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time 150% 25mA – 800mA 60 minutes, Minimum 1A – 3.15A 60 minutes, Minimum 4A – 6.3A 60 minutes, Minimum 8A – 20A 30 minutes, Minimum 210% 125mA – 800mA 30 minutes, Maximum 1A – 3.15A 30 minutes, Maximum 4A – 6.3A 30 minutes, Maximum 8A – 12A 30 minutes, Maximum 275% 400% 1000%

Applications

  • Approved for cartridge versions only 5x20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification t %FTJHOFEUP International (IEC ) Standards for use globally t )JHICSFBLJOHDBQBDJUZ t .FFUUIF*&$ 60127-2, Sheet 5 specification for Time- Lag fuses t 3P)4DPNQMJBOUBOE lead-free Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. PS E

Description

Revised: April 23, 2012

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology © 2012 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses

215 Series

5×20 mm > Time-Lag > 215 Series Please refer to www.littelfuse.com/series/215.html for current information. T emperature Rerating Curve Amp Code Amp Rating Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissipation at Rated Current (W) Agency Approvals PS E .125 0.125 250

1500 A @

250 VAC

11 .4455 0.0330 2600 1 .6 x x x 001 . 1 250 0.1515 1 .520 350 2.5 x x x x x x x x x 002. 2 250 0.0566 11 .680 190 2.5 x x x x x x x x x 3.15 3.15 250 0.0283 43.255 140 4 x x x x x x x x x 004. 4 250 0.0185 46.960 100 4 x x x x x x x x x 005. 5 250 0.0153 66.095 100 4 x x x x x x x x x 06.3 6.3 250 0.0108 128.750 100 4 x x x x x x x x x 008. 8 250 0.0092 209.880 100 4 x x x x x x x x 010. 10 250 0.0066 333.565 100 4 x x x x x x x* x 012. 12 250 0.0061 515.500 100 4 x x x x x* x 015. 15 250 500 A 0.0033 1237 .0 TBA TBA x x x* 016. 16 250 0.0031 1408.0 TBA TBA xx x * 020. 20 250 400 A 0.0023 2600.0 TBA TBA xx x * Electrical Characteristic Specifications by Item X* Approval for cartridge versions only TBA** - Please contact Littelfuse for details on these parameters I t test at 10x rated current.

© 2012 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Please refer to www.littelfuse.com/series/215.html for current information. Average Time Current Curves 100 1000 10000 0.1 0.01 0.001 0.1 1 10 100 1000 .160 A .125 A .200 A .250 A .315 A .400 A .500 A .630 A .800 A TIME IN SECONDS CURRENT IN AMPERES T -C Curves for 125mA to 800mA only T -C Curves for 1A to 20A only 100 1000 10000 0.1 0.01 0.001 0.1 1 10 100 1000 TIME IN SECONDS CURRENT IN AMPERES 1.0 0 A 1.25 A 2.00 A 2.50 A 1.60 A 3.15 A 4.00 A 5.00 A 6.30 A 8.00 A 10.0 A 12.0 A 15.0 A 16.0 A 20.0 A Materials Body: Ceramic Cap:/JDLFMoQMBUFE#SBTT Leads: Tin–plated Copper T erminal Strength .*-45%( .FUIPE" 5FTU Condition A Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2:"HFODZBQQSPWBMNBSLJOHT Product Characteristics Operating Temperature –55ºC to +125ºC Thermal Shock .*-45%( .FUIPE( 5FTU Condition B (5 cycles, –65ºC to +125ºC) Vibration .*-45%( .FUIPE" Humidity .*-45%( .FUIPE# 5FTU $POEJUJPO" )JHI3) BOE elevated temp (40ºC) for 240 hours) Salt Spray .*-45%( .FUIPE% 5FTU Condition B

Introduction to Circuit ProtectionIntroduction to Circuit Protection Transientology © 2012 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Please refer to www.littelfuse.com/series/215.html for current information. Dimensions 0215.125P to 0215020P 0215.125XEP to 0215.800XEP 0215001.XEP to 0215020.XEP * Ratings above 6.3 A have 0.8 mm diameter lead; ratings above 12 A have 1.2 mm diameter lead Part Numbering System 0215 xxxx M X E P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Lead-free Quantity Code M = 1000 Option Codes Blank : Cartidge Type Fuse E : Axial Lead Fuse Packaging Code X = Filler Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: %FQFOETPO'MVY"DUJWBUJPO5FNQFSBUVSF (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C )FBUJOH5JNFTFDPOETNBY Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB: Lead forming: The distance C between cap flat surface and axial lead shall be greater than 1 .0 mm. PCB mounting: The distance between PCB and fuse cap is recommended to be a minimum of 1 .5 mm. A B C C A B Different values of A and B available, please contact the Littelfuse sales representative in your region:

© 2012 Littelfuse, Inc. Specifications are subject to change without notice. Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Please refer to www.littelfuse.com/series/215.html for current information. Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width #VML N /A 1000 MX N/A #VML N/A 1000 MXE N/A Reel and Tape N/A 1000 MRET1 T1=52mm (2.062”) #VML N/A 1000 .9( N/A #VML N/A 1000 MXB N/A #VML N/A 100 )9 N/A